X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx6sabresd.h;h=555942a2c2ab79100e879c18b698b2a4fd371ddf;hb=2b9b9cdd5f9ae1cbc786ba3c2255a51b3ea4a636;hp=dab2fd2ea2b399808580ebd2802cc38a9f383c06;hpb=86e6f7eaa15f0aca03bb7c961902563348c2dd05;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index dab2fd2..555942a 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -1,47 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2012 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the Freescale i.MX6Q SabreSD board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef __MX6QSABRESD_CONFIG_H
-#define __MX6QSABRESD_CONFIG_H
-
-#include <asm/arch/imx-regs.h>
-#include <asm/imx-common/gpio.h>
+#ifndef __MX6SABRESD_CONFIG_H
+#define __MX6SABRESD_CONFIG_H
 
 #ifdef CONFIG_SPL
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
 #include "imx6_spl.h"
 #endif
 
 #define CONFIG_MACH_TYPE	3980
 #define CONFIG_MXC_UART_BASE	UART1_BASE
-#define CONFIG_CONSOLE_DEV		"ttymxc0"
-#define CONFIG_MMCROOT			"/dev/mmcblk1p2"
-#if defined(CONFIG_MX6Q)
-#define CONFIG_DEFAULT_FDT_FILE	"imx6q-sabresd.dtb"
-#elif defined(CONFIG_MX6DL)
-#define CONFIG_DEFAULT_FDT_FILE	"imx6dl-sabresd.dtb"
-#endif
-#define PHYS_SDRAM_SIZE		(1u * 1024 * 1024 * 1024)
+#define CONSOLE_DEV		"ttymxc0"
 
 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
 
 #include "mx6sabre_common.h"
 
+/* Falcon Mode */
+#define CONFIG_SPL_FS_LOAD_ARGS_NAME	"args"
+#define CONFIG_SPL_FS_LOAD_KERNEL_NAME	"uImage"
+#define CONFIG_SYS_SPL_ARGS_ADDR       0x18000000
+
+/* Falcon Mode - MMC support: args@1MB kernel@2MB */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x800   /* 1MB */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0x1000  /* 2MB */
+
 #define CONFIG_SYS_FSL_USDHC_NUM	3
 #if defined(CONFIG_ENV_IS_IN_MMC)
 #define CONFIG_SYS_MMC_ENV_DEV		1	/* SDHC3 */
 #endif
 
-#define CONFIG_CMD_PCI
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI
-#define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX
 #define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(7, 12)
@@ -49,9 +43,10 @@
 #endif
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED		  100000
 
@@ -62,17 +57,11 @@
 #define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
 
 /* USB Configs */
-#define CONFIG_CMD_USB
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS		0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	1 /* Enabled USB controller number */
 #endif
 
-#endif                         /* __MX6QSABRESD_CONFIG_H */
+#endif                         /* __MX6SABRESD_CONFIG_H */