X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx6sabreauto.h;h=da98139d7d77397cf609d84b1401b5b206854555;hb=dd11fdc31fb82f63258c1970a6d8d22b8ffd3173;hp=5e8446088b1eb3e91adc728594e9520538e1ed95;hpb=776bf6a5457eb0c61c367d1ee7e45733a1c72ed6;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h
index 5e84460..da98139 100644
--- a/include/configs/mx6sabreauto.h
+++ b/include/configs/mx6sabreauto.h
@@ -8,55 +8,34 @@
 #ifndef __MX6SABREAUTO_CONFIG_H
 #define __MX6SABREAUTO_CONFIG_H
 
-#ifdef CONFIG_SPL
-#include "imx6_spl.h"
-#endif
-
-#define CONFIG_MXC_UART_BASE	UART4_BASE
+#define CFG_MXC_UART_BASE	UART4_BASE
 #define CONSOLE_DEV		"ttymxc3"
 
 /* USB Configs */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
-#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS	0
+#define CFG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CFG_MXC_USB_FLAGS	0
 
-#define CONFIG_PCA953X
-#define CONFIG_SYS_I2C_PCA953X_WIDTH	{ {0x30, 8}, {0x32, 8}, {0x34, 8} }
+#define CFG_SYS_I2C_PCA953X_WIDTH	{ {0x30, 8}, {0x32, 8}, {0x34, 8} }
 
 #include "mx6sabre_common.h"
 
 /* Falcon Mode */
 #ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME	"args"
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME	"uImage"
-#define CONFIG_SYS_SPL_ARGS_ADDR       0x18000000
-
 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x800   /* 1MB */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
-#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0x1000  /* 2MB */
 #endif
 
 #ifdef CONFIG_MTD_NOR_FLASH
-#define CONFIG_SYS_FLASH_BASE           WEIM_ARB_BASE_ADDR
-#define CONFIG_SYS_FLASH_SECT_SIZE      (128 * 1024)
-#define CONFIG_SYS_MAX_FLASH_BANKS 1    /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 256   /* max number of sectors on one chip */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#define CFG_SYS_FLASH_BASE           WEIM_ARB_BASE_ADDR
 #endif
 
-#define CONFIG_SYS_FSL_USDHC_NUM	2
+#define CFG_SYS_FSL_USDHC_NUM	2
 
 /* NAND stuff */
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_SYS_NAND_BASE           0x40000000
+#define CFG_SYS_NAND_BASE           0x40000000
 
 /* DMA stuff, needed for GPMI/MXS NAND support */
 
 /* PMIC */
-#define CONFIG_POWER_PFUZE100
 #define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
 
 #endif                         /* __MX6SABREAUTO_CONFIG_H */