X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx6qsabrelite.h;h=b56d7ca8ca91c0c9c6f365046d6cc29fd1ae9e0f;hb=f04821a8ca714459481bd9fd315af2b5f92d99a6;hp=feabc05a475b022e194bf84972f4f9b46c1da350;hpb=8bd07c9aaf4628931ab8da6eb0f83e517d9381a7;p=kernel%2Fu-boot.git

diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index feabc05..b56d7ca 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -23,14 +23,13 @@
 #define __CONFIG_H
 
 #define CONFIG_MX6Q
-#define CONFIG_SYS_MX6_HCLK	       24000000
-#define CONFIG_SYS_MX6_CLK32	       32768
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_MACH_TYPE	3769
 
 #include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
 
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
@@ -38,9 +37,8 @@
 #define CONFIG_REVISION_TAG
 
 /* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN	       (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
 
-#define CONFIG_ARCH_CPU_INIT
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MISC_INIT_R
 #define CONFIG_MXC_GPIO
@@ -54,11 +52,17 @@
 #define CONFIG_SPI_FLASH_SST
 #define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS  0
-#define CONFIG_SF_DEFAULT_CS   (0|(GPIO_NUMBER(3, 19)<<8))
+#define CONFIG_SF_DEFAULT_CS   (0|(IMX_GPIO_NR(3, 19)<<8))
 #define CONFIG_SF_DEFAULT_SPEED 25000000
 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
 #endif
 
+/* I2C Configs */
+#define CONFIG_CMD_I2C
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_MXC
+#define CONFIG_SYS_I2C_SPEED		100000
+
 /* MMC Configs */
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_USDHC
@@ -68,6 +72,7 @@
 #define CONFIG_MMC
 #define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
+#define CONFIG_MMC_BOUNCE_BUFFER
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
@@ -97,6 +102,7 @@
 #define CONFIG_FEC_MXC_PHYADDR		6
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9021
 
 /* USB Configs */
 #define CONFIG_CMD_USB
@@ -111,11 +117,26 @@
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS	0
 
+/* Miscellaneous commands */
+#define CONFIG_CMD_BMODE
+
+/* Framebuffer and LCD */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_IPUV3_CLK 260000000
+
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	       1
 #define CONFIG_BAUDRATE			       115200
-#define CONFIG_SYS_BAUDRATE_TABLE      {9600, 19200, 38400, 57600, 115200}
 
 /* Command definition */
 #include <config_cmd_default.h>
@@ -157,7 +178,7 @@
 
 #define CONFIG_BOOTCOMMAND \
        "mmc dev ${mmcdev};" \
-       "if mmc rescan ${mmcdev}; then " \
+       "mmc dev ${mmcdev}; if mmc rescan; then " \
 	       "if run loadbootscript; then " \
 		       "run bootscript; " \
 	       "else " \
@@ -173,7 +194,6 @@
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_SYS_PROMPT	       "MX6QSABRELITE U-Boot > "
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE	       256
@@ -190,7 +210,6 @@
 #define CONFIG_SYS_HZ		       1000
 
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_STACKSIZE	       (128 * 1024)
 
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS	       1
@@ -229,8 +248,6 @@
 #define CONFIG_OF_LIBFDT
 #define CONFIG_CMD_BOOTZ
 
-#define CONFIG_SYS_DCACHE_OFF
-
 #ifndef CONFIG_SYS_DCACHE_OFF
 #define CONFIG_CMD_CACHE
 #endif