X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx6cuboxi.h;h=e10e7688e9f7dba18037161ceada6c1c6288f530;hb=306881a0bfca22798da64f55206ef2824f37efed;hp=7fefe8edcb81747e2f09a9fef622bc1afbbf1c5d;hpb=b1e8512e9dbe1771da9c3ad3ddfaf7681318fe0e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h
index 7fefe8e..e10e768 100644
--- a/include/configs/mx6cuboxi.h
+++ b/include/configs/mx6cuboxi.h
@@ -1,14 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2015 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the SolidRun mx6 based boards
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 #ifndef __MX6CUBOXI_CONFIG_H
 #define __MX6CUBOXI_CONFIG_H
 
-#include <config_distro_defaults.h>
 #include "mx6_common.h"
 
 #include "imx6_spl.h"
@@ -23,24 +21,19 @@
 
 /* SATA Configuration */
 #ifdef CONFIG_CMD_SATA
-#define CONFIG_DWC_AHSATA
 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 #define CONFIG_DWC_AHSATA_PORT_ID       0
 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
-#define CONFIG_LIBATA
 #endif
 
 /* Ethernet Configuration */
 #define CONFIG_FEC_MXC
-#define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RGMII
 #define CONFIG_FEC_MXC_PHYADDR		0
-#define CONFIG_PHY_ATHEROS
 
 /* Framebuffer */
-#define CONFIG_VIDEO_IPUV3
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
@@ -51,32 +44,18 @@
 #define CONFIG_IMX_VIDEO_SKIP
 
 /* USB */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS		0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
-#define CONFIG_PREBOOT \
-	"if hdmidet; then " \
-		"usb start; "		       \
-		"setenv stdin  serial,usbkbd; "\
-		"setenv stdout serial,vga; "   \
-		"setenv stderr serial,vga; "   \
-	"else " \
-		"setenv stdin  serial; " \
-		"setenv stdout serial; " \
-		"setenv stderr serial; " \
-	"fi;"
 
 /* Command definition */
 
 #define CONFIG_MXC_UART_BASE	UART1_BASE
 #define CONSOLE_DEV	"ttymxc0"
-#define CONFIG_SYS_FSL_USDHC_NUM	1
 #define CONFIG_SYS_MMC_ENV_DEV		0	/* SDHC2 */
 
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS \
+	"som_rev=undefined\0" \
+	"has_emmc=undefined\0" \
 	"fdtfile=undefined\0" \
 	"fdt_addr_r=0x18000000\0" \
 	"fdt_addr=0x18000000\0" \
@@ -86,7 +65,6 @@
 	"ramdisk_addr_r=0x13000000\0" \
 	"ramdiskaddr=0x13000000\0" \
 	"initrd_high=0xffffffff\0" \
-	"fdt_high=0xffffffff\0" \
 	"ip_dyn=yes\0" \
 	"console=" CONSOLE_DEV ",115200\0" \
 	"bootm_size=0x10000000\0" \
@@ -106,29 +84,27 @@
 			"fi; "	\
 		"fi\0" \
 	"findfdt="\
-		"if test $board_name = HUMMINGBOARD2 && test $board_rev = MX6Q ; then " \
-			"setenv fdtfile imx6q-hummingboard2.dtb; fi; " \
-		"if test $board_name = HUMMINGBOARD2 && test $board_rev = MX6DL ; then " \
-			"setenv fdtfile imx6dl-hummingboard2.dtb; fi; " \
-		"if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
-			"setenv fdtfile imx6q-hummingboard.dtb; fi; " \
-		"if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \
-			"setenv fdtfile imx6dl-hummingboard.dtb; fi; " \
-		"if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \
-			"setenv fdtfile imx6q-cubox-i.dtb; fi; " \
-		"if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \
-			"setenv fdtfile imx6dl-cubox-i.dtb; fi; " \
-		"if test $fdtfile = undefined; then " \
+		"if test ${board_rev} = MX6Q; then " \
+			"setenv fdtprefix imx6q; fi; " \
+		"if test ${board_rev} = MX6DL; then " \
+			"setenv fdtprefix imx6dl; fi; " \
+		"if test ${som_rev} = V15; then " \
+			"setenv fdtsuffix -som-v15; fi; " \
+		"if test ${has_emmc} = yes; then " \
+			"setenv emmcsuffix -emmc; fi; " \
+		"if test ${board_name} = HUMMINGBOARD2 ; then " \
+			"setenv fdtfile ${fdtprefix}-hummingboard2${emmcsuffix}${fdtsuffix}.dtb; fi; " \
+		"if test ${board_name} = HUMMINGBOARD ; then " \
+			"setenv fdtfile ${fdtprefix}-hummingboard${emmcsuffix}${fdtsuffix}.dtb; fi; " \
+		"if test ${board_name} = CUBOXI ; then " \
+			"setenv fdtfile ${fdtprefix}-cubox-i${emmcsuffix}${fdtsuffix}.dtb; fi; " \
+		"if test ${fdtfile} = undefined; then " \
 			"echo WARNING: Could not determine dtb to use; fi; \0" \
 	BOOTENV
 
-#define CONFIG_BOOTCOMMAND \
-	"run findfdt; " \
-	"run finduuid; " \
-	"run distro_bootcmd"
-
 #define BOOT_TARGET_DEVICES(func) \
-	func(MMC, mmc, 0) \
+	func(MMC, mmc, 1) \
+	func(MMC, mmc, 2) \
 	func(SATA, sata, 0) \
 	func(USB, usb, 0) \
 	func(PXE, pxe, na) \
@@ -141,7 +117,6 @@
 #endif /* CONFIG_SPL_BUILD */
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE          MMDC0_ARB_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
@@ -152,7 +127,5 @@
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* Environment organization */
-#define CONFIG_ENV_SIZE			(8 * 1024)
-#define CONFIG_ENV_OFFSET		(8 * 64 * 1024)
 
 #endif                         /* __MX6CUBOXI_CONFIG_H */