X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx53ppd.h;h=b26613a2ea8344d5965dff7d9b4d54c82f9604de;hb=a29491ade0adf3dbb9dc51be8b45530edde1f1df;hp=f7667eca7c09c46600c7a572e0153bc56ec52a9e;hpb=71d96eb99e79ba69f47504b72cd54ce121eca422;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h
index f7667ec..b26613a 100644
--- a/include/configs/mx53ppd.h
+++ b/include/configs/mx53ppd.h
@@ -11,67 +11,13 @@
 
 #include <asm/arch/imx-regs.h>
 
-#define CONSOLE_DEV	"ttymxc0"
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#define CONFIG_SYS_FSL_CLK
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
-
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_REVISION_TAG
-
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE	UART1_BASE
-
-/* Eth Configs */
-
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE	FEC_BASE_ADDR
-#define CONFIG_FEC_MXC_PHYADDR	0x1F
-
 /* USB Configs */
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_MCS7830
-#define CONFIG_USB_ETHER_SMSC95XX
 #define CONFIG_MXC_USB_PORT	1
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS	0
 
-#define CONFIG_SYS_RTC_BUS_NUM		2
-#define CONFIG_SYS_I2C_RTC_ADDR	0x30
-
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
-
-/* PMIC Controller */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_DIALOG_POWER
-#define CONFIG_POWER_FSL
-#define CONFIG_POWER_FSL_MC13892
-#define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR	0x48
-#define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x8
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE			115200
-
 /* Command definition */
 
-#define CONFIG_ETHPRIME		"FEC0"
-
-#define CONFIG_LOADADDR		0x72000000	/* loadaddr env var */
-
 #define PPD_CONFIG_NFS \
 	"nfsserver=192.168.252.95\0" \
 	"gatewayip=192.168.252.95\0" \
@@ -92,40 +38,34 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	PPD_CONFIG_NFS \
 	"image=/boot/fitImage\0" \
-	"fdt_high=0xffffffff\0" \
 	"dev=mmc\0" \
 	"devnum=2\0" \
 	"rootdev=mmcblk0p\0" \
 	"quiet=quiet loglevel=0\0" \
-	"console=" CONSOLE_DEV "\0" \
 	"lvds=ldb\0" \
 	"setargs=setenv bootargs ${lvds} jtag=on mem=2G " \
-		"vt.global_cursor_default=0 bootcause=${bootcause} ${quiet} " \
-		"console=${console} ${rtc_status}\0" \
+		"vt.global_cursor_default=0 bootcause=${bootcause} ${quiet}\0" \
 	"bootargs_emmc=setenv bootargs root=/dev/${rootdev}${partnum} ro " \
 		"rootwait ${bootargs}\0" \
-	"doquiet=if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
-		"then setenv quiet; fi\0" \
-	"hasfirstboot=ext2load ${dev} ${devnum}:${partnum} 0x7000A000 " \
-		"/boot/bootcause/firstboot\0" \
-	"swappartitions=setexpr partnum 3 - ${partnum}\0" \
+	"doquiet=" \
+		"if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
+			"then setenv quiet; fi\0" \
+	"hasfirstboot=" \
+		"test -e ${dev} ${devnum}:${partnum} /boot/bootcause/firstboot\0" \
+	"swappartitions=" \
+		"setexpr partnum 3 - ${partnum}\0" \
 	"failbootcmd=" \
-		"ppd_lcd_enable; " \
-		"msg=\"Monitor failed to start.  " \
-			"Try again, or contact GE Service for support.\"; " \
-		"echo $msg; " \
-		"setenv stdout vga; " \
-		"echo \"\n\n\n\n    \" $msg; " \
-		"setenv stdout serial; " \
-		"mw.b 0x7000A000 0xbc; " \
-		"mw.b 0x7000A001 0x00; " \
-		"ext4write ${dev} ${devnum}:5 0x7000A000 /boot/failures 2\0" \
+		"cls; " \
+		"setcurs 5 4; " \
+		"lcdputs \"Monitor failed to start. " \
+		"Try again, or contact GE Service for support.\"; " \
+		"bootcount reset; " \
+		"while true; do sleep 1; done; \0" \
 	"altbootcmd=" \
 		"run doquiet; " \
 		"setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
 		"run hasfirstboot || setenv partnum 0; " \
 		"if test ${partnum} != 0; then " \
-			"setenv bootcause REVERT; " \
 			"run swappartitions loadimage doboot; " \
 		"fi; " \
 		"run failbootcmd\0" \
@@ -145,26 +85,9 @@
 	"video-mode=" \
 		"lcd:800x480-24@60,monitor=lcd\0" \
 
-#define CONFIG_MMCBOOTCOMMAND \
-	"if mmc dev ${devnum}; then " \
-		"run doquiet; " \
-		"run tryboot; " \
-	"fi; " \
-
-#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
-
-#define CONFIG_ARP_TIMEOUT	200UL
-
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
-
-#define CONFIG_SYS_MAXARGS	48	/* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 
-#define CONFIG_SYS_MEMTEST_START       0x70000000
-#define CONFIG_SYS_MEMTEST_END         0x70010000
-
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+#define CONFIG_SYS_BOOTMAPSZ (256 << 20)     /* 256M */
 
 /* Physical Memory Map */
 #define PHYS_SDRAM_1			CSD0_BASE_ADDR
@@ -177,36 +100,13 @@
 #define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR)
 #define CONFIG_SYS_INIT_RAM_SIZE	(IRAM_SIZE)
 
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
 /* FLASH and environment organization */
-#define CONFIG_SYS_MMC_ENV_DEV 0
 
-#define CONFIG_CMD_FUSE
 #define CONFIG_FSL_IIM
 
-#define CONFIG_SYS_I2C_SPEED	100000
-
-/* I2C1 */
-#define CONFIG_SYS_NUM_I2C_BUSES	9
-#define CONFIG_SYS_I2C_MAX_HOPS		1
-#define CONFIG_SYS_I2C_BUSES	{	{0, {I2C_NULL_HOP} }, \
-					{0, {{I2C_MUX_PCA9547, 0x70, 0} } }, \
-					{0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
-					{0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
-					{0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
-					{0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
-					{0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
-					{0, {{I2C_MUX_PCA9547, 0x70, 6} } }, \
-					{0, {{I2C_MUX_PCA9547, 0x70, 7} } }, \
-				}
-
-#define CONFIG_BCH
-
 /* Backlight Control */
 #define CONFIG_IMX6_PWM_PER_CLK 66666000
 
+#define CONFIG_IMX_VIDEO_SKIP
+
 #endif				/* __CONFIG_H */