X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx53ppd.h;h=196eab05c2688e1001f19e0fa90d455ceb475b6b;hb=6d7dacf726ca043a3f5487549bbfa506c990c813;hp=79c97b5aa3c4152f39abfc89583d689677f57c63;hpb=7961b9f6db19d039b4e6e9c21a9715b6d5b92393;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h index 79c97b5..196eab0 100644 --- a/include/configs/mx53ppd.h +++ b/include/configs/mx53ppd.h @@ -1,10 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2011 Freescale Semiconductor, Inc. * Jason Liu * * Configuration settings for Freescale MX53 low cost board. - * - * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H @@ -12,8 +11,6 @@ #include -#define CONSOLE_DEV "ttymxc0" - #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -23,33 +20,10 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) -#define CONFIG_HW_WATCHDOG -#define CONFIG_IMX_WATCHDOG -#define CONFIG_WATCHDOG_TIMEOUT_MSECS 8000 - -#define CONFIG_MISC_INIT_R #define CONFIG_BOARD_LATE_INIT #define CONFIG_REVISION_TAG -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE - -/* MMC Configs */ -#define CONFIG_FSL_ESDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_ESDHC_NUM 2 - -#define CONFIG_SUPPORT_RAW_INITRD /* bootz raw initrd support */ - -/* Eth Configs */ -#define CONFIG_MII - -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE FEC_BASE_ADDR -#define CONFIG_FEC_MXC_PHYADDR 0x1F - /* USB Configs */ -#define CONFIG_USB_EHCI_MX5 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX #define CONFIG_USB_ETHER_MCS7830 @@ -58,34 +32,11 @@ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_SYS_RTC_BUS_NUM 2 -#define CONFIG_SYS_I2C_RTC_ADDR 0x30 - -/* I2C Configs */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ - -/* PMIC Controller */ -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_DIALOG_POWER -#define CONFIG_POWER_FSL -#define CONFIG_POWER_FSL_MC13892 -#define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48 -#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8 - /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 /* Command definition */ -#define CONFIG_SUPPORT_RAW_INITRD - -#define CONFIG_ETHPRIME "FEC0" #define CONFIG_LOADADDR 0x72000000 /* loadaddr env var */ @@ -99,45 +50,36 @@ "nfsroot=/opt/springdale/rd\0" \ "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs " \ "${kern_ipconf} nfsroot=${nfsserver}:${nfsroot},v3,tcp rw\0" \ - "choose_ip=if test $use_dhcp = 1; then set kern_ipconf ip=dhcp; " \ - "set getcmd dhcp; else set kern_ipconf " \ + "choose_ip=if test $use_dhcp = 1; then setenv kern_ipconf ip=dhcp; " \ + "setenv getcmd dhcp; else setenv kern_ipconf " \ "ip=${ipaddr}:${nfsserver}:${gatewayip}:${netmask}::eth0:off; " \ - "set getcmd tftp; fi\0" \ + "setenv getcmd tftp; fi\0" \ "nfs=run choose_ip setargs bootargs_nfs; ${getcmd} ${loadaddr} " \ "${nfsserver}:${image}; bootm ${loadaddr}\0" \ #define CONFIG_EXTRA_ENV_SETTINGS \ PPD_CONFIG_NFS \ - "bootlimit=10\0" \ "image=/boot/fitImage\0" \ - "fdt_high=0xffffffff\0" \ "dev=mmc\0" \ - "devnum=0\0" \ + "devnum=2\0" \ "rootdev=mmcblk0p\0" \ "quiet=quiet loglevel=0\0" \ - "console=" CONSOLE_DEV "\0" \ "lvds=ldb\0" \ "setargs=setenv bootargs ${lvds} jtag=on mem=2G " \ - "vt.global_cursor_default=0 bootcause=${bootcause} ${quiet} " \ - "console=${console} ${rtc_status}\0" \ + "vt.global_cursor_default=0 bootcause=${bootcause} ${quiet}\0" \ "bootargs_emmc=setenv bootargs root=/dev/${rootdev}${partnum} ro " \ "rootwait ${bootargs}\0" \ "doquiet=if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \ "then setenv quiet; fi\0" \ - "hasfirstboot=ext2load ${dev} ${devnum}:${partnum} 0x7000A000 " \ - "/boot/bootcause/firstboot\0" \ + "hasfirstboot=" \ + "test -e ${dev} ${devnum}:${partnum} /boot/bootcause/firstboot\0" \ "swappartitions=setexpr partnum 3 - ${partnum}\0" \ "failbootcmd=" \ - "ppd_lcd_enable; " \ - "msg=\"Monitor failed to start. " \ - "Try again, or contact GE Service for support.\"; " \ - "echo $msg; " \ - "setenv stdout vga; " \ - "echo \"\n\n\n\n \" $msg; " \ - "setenv stdout serial; " \ - "mw.b 0x7000A000 0xbc; " \ - "mw.b 0x7000A001 0x00; " \ - "ext4write ${dev} ${devnum}:5 0x7000A000 /boot/failures 2\0" \ + "cls; " \ + "setcurs 5 4; " \ + "lcdputs \"Monitor failed to start. " \ + "Try again, or contact GE Service for support.\"; " \ + "bootcount reset; \0" \ "altbootcmd=" \ "run doquiet; " \ "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \ @@ -174,8 +116,6 @@ #define CONFIG_ARP_TIMEOUT 200UL /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_MAXARGS 48 /* max number of command args */ @@ -186,10 +126,9 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */ /* Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 2 #define PHYS_SDRAM_1 CSD0_BASE_ADDR #define PHYS_SDRAM_1_SIZE (gd->bd->bi_dram[0].size) #define PHYS_SDRAM_2 CSD1_BASE_ADDR @@ -206,39 +145,16 @@ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) /* FLASH and environment organization */ -#define CONFIG_ENV_OFFSET (6 * 64 * 1024) -#define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_CMD_FUSE #define CONFIG_FSL_IIM -#define CONFIG_SYS_I2C_SPEED 100000 - -/* I2C1 */ -#define CONFIG_SYS_NUM_I2C_BUSES 9 -#define CONFIG_SYS_I2C_MAX_HOPS 1 -#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 0} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 6} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 7} } }, \ - } - #define CONFIG_BCH /* Backlight Control */ -#define CONFIG_PWM_IMX #define CONFIG_IMX6_PWM_PER_CLK 66666000 -/* Framebuffer and LCD */ -#ifdef CONFIG_VIDEO - #define CONFIG_VIDEO_IPUV3 -#endif +#define CONFIG_IMX_VIDEO_SKIP #endif /* __CONFIG_H */