X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx53ard.h;h=62cb42bc4c9fa1722e21f75ae37b5c0029ee2298;hb=4c25761337570e63e9e2631a81de221e692251e3;hp=26fc219ca2c42d93e643a3acdff3688976cd540c;hpb=1fed668b3fb9c35932f58af00ff5539239fa4e1d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index 26fc219..62cb42b 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -24,8 +24,6 @@
 
 #define CONFIG_MX53
 
-#define CONFIG_SYS_MX5_HCLK	24000000
-#define CONFIG_SYS_MX5_CLK32		32768
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
@@ -34,7 +32,6 @@
 #include <asm/arch/imx-regs.h>
 
 #define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */
-#define CONFIG_REVISION_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 
@@ -45,15 +42,14 @@
 #define CONFIG_MXC_GPIO
 
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX53_UART1
+#define CONFIG_MXC_UART_BASE	UART1_BASE
 
 /* I2C Configs */
 #define CONFIG_CMD_I2C
 #define CONFIG_HARD_I2C
 #define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_MX53_PORT2
+#define CONFIG_SYS_I2C_BASE		I2C2_BASE_ADDR
 #define CONFIG_SYS_I2C_SPEED            100000
-#define CONFIG_SYS_I2C_SLAVE            0xfe
 
 /* MMC Configs */
 #define CONFIG_FSL_ESDHC
@@ -68,10 +64,7 @@
 
 /* Eth Configs */
 #define CONFIG_HAS_ETH1
-#define CONFIG_NET_MULTI
 #define CONFIG_MII
-#define CONFIG_MII_GASKET
-#define CONFIG_DISCOVER_PHY
 
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
@@ -82,7 +75,6 @@
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
 
 /* Command definition */
 #include <config_cmd_default.h>
@@ -91,7 +83,7 @@
 
 #define CONFIG_BOOTDELAY	3
 
-#define CONFIG_PRIME	"smc911x"
+#define CONFIG_ETHPRIME		"smc911x"
 
 /*Support LAN9217*/
 #define CONFIG_SMC911X
@@ -127,7 +119,7 @@
 		"dhcp ${uimage}; bootm\0" \
 
 #define CONFIG_BOOTCOMMAND \
-	"if mmc rescan ${mmcdev}; then " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
@@ -142,7 +134,6 @@
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_SYS_PROMPT		"MX53ARD U-Boot > "
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
@@ -160,9 +151,6 @@
 #define CONFIG_SYS_HZ		1000
 #define CONFIG_CMDLINE_EDITING
 
-/* Stack sizes */
-#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS	2
 #define PHYS_SDRAM_1		CSD0_BASE_ADDR