X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx35pdk.h;h=69bd654b9f5ae397f677d8561e838ae5bf442f95;hb=495dbd72dd1172de866ba323263a5b62cf454972;hp=32ed6096ae1990c2afacd8104904be3a33da5aa5;hpb=5721385b187b3154c7768e6c182501022f4e2e45;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 32ed609..69bd654 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -31,15 +31,12 @@
  /* High Level Configuration Options */
 #define CONFIG_ARM1136	/* This is an arm1136 CPU core */
 #define CONFIG_MX35
-#define CONFIG_MX35_HCLK_FREQ	24000000
 
 #define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
 
 /* Set TEXT at the beginning of the NOR flash */
 #define CONFIG_SYS_TEXT_BASE	0xA0000000
-
-#define CONFIG_SYS_64BIT_VSPRINTF
+#define CONFIG_SYS_CACHELINE_SIZE	32
 
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_LATE_INIT
@@ -59,9 +56,8 @@
  */
 #define CONFIG_HARD_I2C
 #define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_MX35_PORT1
+#define CONFIG_SYS_I2C_BASE		I2C1_BASE_ADDR
 #define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		0xfe
 #define CONFIG_MXC_SPI
 #define CONFIG_MXC_GPIO
 
@@ -85,13 +81,12 @@
  * UART (console)
  */
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX35_UART1
+#define CONFIG_MXC_UART_BASE	UART1_BASE
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
 
 /*
  * Command definition
@@ -106,6 +101,7 @@
 #define CONFIG_BOOTP_DNS
 
 #define CONFIG_CMD_NAND
+#define CONFIG_CMD_CACHE
 
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_SPI
@@ -114,6 +110,12 @@
 #define CONFIG_NET_RETRY_COUNT	100
 #define CONFIG_CMD_DATE
 
+#define CONFIG_CMD_MMC
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
 #define CONFIG_BOOTDELAY	3
 
 #define CONFIG_LOADADDR		0x80800000	/* loadaddr env var */
@@ -136,7 +138,6 @@
 #define CONFIG_FEC_MXC_PHYADDR	0x1F
 
 #define CONFIG_MII
-#define CONFIG_DISCOVER_PHY
 
 #define CONFIG_ARP_TIMEOUT	200UL
 
@@ -147,7 +148,6 @@
 #define CONFIG_SYS_PROMPT	"MX35 U-Boot > "
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_HUSH_PARSER	/* Use the HUSH parser */
-#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
@@ -165,14 +165,6 @@
 
 #define CONFIG_SYS_HZ				1000
 
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
-
 /*
  * Physical Memory Map
  */
@@ -244,13 +236,19 @@
  * NAND FLASH driver setup
  */
 #define CONFIG_NAND_MXC
-#define CONFIG_NAND_MXC_V1_1
 #define CONFIG_MXC_NAND_REGS_BASE	(NFC_BASE_ADDR)
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		(NFC_BASE_ADDR)
 #define CONFIG_MXC_NAND_HWECC
 #define CONFIG_SYS_NAND_LARGEPAGE
 
+/* mmc driver */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CONFIG_SYS_FSL_ESDHC_NUM	1
+
 /*
  * Default environment and default scripts
  * to update uboot and load kernel
@@ -292,8 +290,8 @@
 	"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0"			\
 	"load=tftp ${loadaddr} ${u-boot}\0"				\
 	"uboot_addr=" xstr(CONFIG_SYS_MONITOR_BASE) "\0"		\
-	"update=protect off ${uboot_addr} +40000;"			\
-		"erase ${uboot_addr} +40000;"				\
+	"update=protect off ${uboot_addr} +80000;"			\
+		"erase ${uboot_addr} +80000;"				\
 		"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"		\
 	"upd=if run load;then echo Updating u-boot;if run update;"	\
 		"then echo U-Boot updated;"				\