X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx31pdk.h;h=4765764f83a9edebf8e38ef9d26e9aeffc81fcb9;hb=9450ab2ba8d720bd9f73bccc0af2e2b5a2c2aaf1;hp=3f63007819a6464bd06f5eecf38b58901d319063;hpb=f4c6f9335c1e867862dcebcfa9c05b2e3dd05636;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 3f63007..4765764 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * (C) Copyright 2008 Magnus Lilja * @@ -7,8 +8,6 @@ * Kshitij Gupta * * Configuration settings for the Freescale i.MX31 PDK board. - * - * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H @@ -17,11 +16,6 @@ #include /* High Level Configuration Options */ -#define CONFIG_MX31 /* This is a mx31 */ - -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -29,14 +23,9 @@ #define CONFIG_MACH_TYPE MACH_TYPE_MX31_3DS #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" -#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" #define CONFIG_SPL_MAX_SIZE 2048 -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_TEXT_BASE 0x87dc0000 -#define CONFIG_SYS_TEXT_BASE 0x87e00000 #ifndef CONFIG_SPL_BUILD #define CONFIG_SKIP_LOWLEVEL_INIT @@ -53,10 +42,7 @@ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE -#define CONFIG_MXC_GPIO -#define CONFIG_HARD_SPI -#define CONFIG_MXC_SPI #define CONFIG_DEFAULT_SPI_BUS 1 #define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) @@ -73,18 +59,6 @@ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/*********************************************************** - * Command definition - ***********************************************************/ -#define CONFIG_CMD_DATE -#define CONFIG_CMD_NAND - -#define CONFIG_BOARD_LATE_INIT - -#define CONFIG_BOOTDELAY 1 #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs_base=setenv bootargs console=ttymxc0,115200\0" \ @@ -97,19 +71,9 @@ "nand erase 0x0 0x40000; " \ "nand write 0x81000000 0x0 0x40000\0" -#define CONFIG_SMC911X -#define CONFIG_SMC911X_BASE 0xB6000000 -#define CONFIG_SMC911X_32_BIT - /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* memtest works on */ #define CONFIG_SYS_MEMTEST_START 0x80000000 @@ -118,15 +82,11 @@ /* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x81000000 -#define CONFIG_CMDLINE_EDITING - /*----------------------------------------------------------------------- * Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 CSD0_BASE #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) -#define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR @@ -136,13 +96,9 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ CONFIG_SYS_INIT_RAM_SIZE) -/*----------------------------------------------------------------------- - * FLASH and environment organization +/* + * environment organization */ -/* No NOR flash present */ -#define CONFIG_SYS_NO_FLASH - -#define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET 0x40000 #define CONFIG_ENV_OFFSET_REDUND 0x60000 #define CONFIG_ENV_SIZE (128 * 1024) @@ -150,7 +106,6 @@ /* * NAND driver */ -#define CONFIG_NAND_MXC #define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR