X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx31pdk.h;h=4253c3e2bcf037188dcedad647b42b9dab9dffdf;hb=4e8b7544b796c4a8d4513b4070716ce42bfba840;hp=f5d3ee79a9c7f353464a83cdf06dacc30ed868d6;hpb=0e0c0892a1fab6f93ba09d89ec3315f08f1b6ef4;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index f5d3ee7..4253c3e 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -33,17 +33,19 @@
 #include <asm/arch/imx-regs.h>
 
 /* High Level Configuration Options */
-#define CONFIG_ARM1136		1	/* This is an arm1136 CPU core */
-#define CONFIG_MX31		1	/* in a mx31 */
+#define CONFIG_ARM1136			/* This is an arm1136 CPU core */
+#define CONFIG_MX31			/* in a mx31 */
 #define CONFIG_MX31_HCLK_FREQ	26000000
 #define CONFIG_MX31_CLK32	32768
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
+#define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+#define CONFIG_MACH_TYPE	MACH_TYPE_MX31_3DS
 
 #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
 #define CONFIG_SKIP_LOWLEVEL_INIT
@@ -53,27 +55,31 @@
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		(2*CONFIG_ENV_SIZE + 2 * 128 * 1024)
-/* Bytes reserved for initial data */
 
 /*
  * Hardware drivers
  */
 
-#define CONFIG_MXC_UART		1
-#define CONFIG_SYS_MX31_UART1	1
+#define CONFIG_MXC_UART
+#define CONFIG_SYS_MX31_UART1
 #define CONFIG_HW_WATCHDOG
+#define CONFIG_MXC_GPIO
 
-#define CONFIG_HARD_SPI		1
-#define CONFIG_MXC_SPI		1
+#define CONFIG_HARD_SPI
+#define CONFIG_MXC_SPI
 #define CONFIG_DEFAULT_SPI_BUS	1
 #define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
 
-#define CONFIG_FSL_PMIC
+/* PMIC Controller */
+#define CONFIG_PMIC
+#define CONFIG_PMIC_SPI
+#define CONFIG_PMIC_FSL
 #define CONFIG_FSL_PMIC_BUS	1
 #define CONFIG_FSL_PMIC_CS	2
 #define CONFIG_FSL_PMIC_CLK	1000000
 #define CONFIG_FSL_PMIC_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
-#define CONFIG_RTC_MC13783	1
+#define CONFIG_FSL_PMIC_BITLEN	32
+#define CONFIG_RTC_MC13XXX
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -89,6 +95,7 @@
 
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_SPI
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_NAND
@@ -99,7 +106,7 @@
  */
 #undef CONFIG_CMD_IMLS
 
-#define BOARD_LATE_INIT
+#define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_BOOTDELAY	3
 
@@ -114,16 +121,15 @@
 		"nand erase 0x0 0x40000; "				\
 		"nand write 0x81000000 0x0 0x40000\0"
 
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC911X		1
+#define CONFIG_SMC911X
 #define CONFIG_SMC911X_BASE	0xB6000000
-#define CONFIG_SMC911X_32_BIT	1
+#define CONFIG_SMC911X_32_BIT
 
 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP	/* undef to save memory */
-#define CONFIG_SYS_PROMPT	"uboot> "
+#define CONFIG_SYS_PROMPT	"MX31PDK U-Boot > "
 #define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
@@ -142,7 +148,7 @@
 
 #define CONFIG_SYS_HZ			1000
 
-#define CONFIG_CMDLINE_EDITING	1
+#define CONFIG_CMDLINE_EDITING
 
 /*-----------------------------------------------------------------------
  * Stack sizes
@@ -157,21 +163,23 @@
 #define CONFIG_NR_DRAM_BANKS	1
 #define PHYS_SDRAM_1		CSD0_BASE
 #define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
-#define CONFIG_BOARD_EARLY_INIT_F	1
+#define CONFIG_BOARD_EARLY_INIT_F
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
+						GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_INIT_RAM_ADDR + \
+						CONFIG_SYS_GBL_DATA_OFFSET)
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
 /* No NOR flash present */
-#define CONFIG_SYS_NO_FLASH	1
+#define CONFIG_SYS_NO_FLASH
 
-#define CONFIG_ENV_IS_IN_NAND		1
+#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET		0x40000
 #define CONFIG_ENV_OFFSET_REDUND	0x60000
 #define CONFIG_ENV_SIZE			(128 * 1024)