X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx31pdk.h;h=17d3143eba827943c9d88f1d99f10767b1c7382d;hb=3d6ba91e793808d1612152e9f9b8c51b3ca6c926;hp=35ceacdeca622e8c3a302e8d7413940bdac86552;hpb=74fac70084bb040342fafc3b0d2ef50fbe35646f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 35ceacd..17d3143 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -45,6 +45,8 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 
+#define CONFIG_MACH_TYPE	MACH_TYPE_MX31_3DS
+
 #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
@@ -59,26 +61,30 @@
  */
 
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX31_UART1
+#define CONFIG_MXC_UART_BASE	UART1_BASE
 #define CONFIG_HW_WATCHDOG
+#define CONFIG_MXC_GPIO
 
 #define CONFIG_HARD_SPI
 #define CONFIG_MXC_SPI
 #define CONFIG_DEFAULT_SPI_BUS	1
 #define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
 
-#define CONFIG_FSL_PMIC
+/* PMIC Controller */
+#define CONFIG_PMIC
+#define CONFIG_PMIC_SPI
+#define CONFIG_PMIC_FSL
 #define CONFIG_FSL_PMIC_BUS	1
 #define CONFIG_FSL_PMIC_CS	2
 #define CONFIG_FSL_PMIC_CLK	1000000
 #define CONFIG_FSL_PMIC_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
-#define CONFIG_RTC_MC13783
+#define CONFIG_FSL_PMIC_BITLEN	32
+#define CONFIG_RTC_MC13XXX
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
 
 /***********************************************************
  * Command definition
@@ -92,6 +98,7 @@
 #define CONFIG_CMD_SPI
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_NAND
+#define CONFIG_CMD_BOOTZ
 
 /*
  * Disabled due to compilation errors in cmd_bootm.c (IMLS seems to require
@@ -99,7 +106,7 @@
  */
 #undef CONFIG_CMD_IMLS
 
-#define BOARD_LATE_INIT
+#define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_BOOTDELAY	3
 
@@ -114,7 +121,6 @@
 		"nand erase 0x0 0x40000; "				\
 		"nand write 0x81000000 0x0 0x40000\0"
 
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X
 #define CONFIG_SMC911X_BASE	0xB6000000
 #define CONFIG_SMC911X_32_BIT
@@ -123,7 +129,7 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP	/* undef to save memory */
-#define CONFIG_SYS_PROMPT	"uboot> "
+#define CONFIG_SYS_PROMPT	"MX31PDK U-Boot > "
 #define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
@@ -135,7 +141,7 @@
 
 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		0x10000
+#define CONFIG_SYS_MEMTEST_END		0x80010000
 
 /* default load address */
 #define CONFIG_SYS_LOAD_ADDR		0x81000000
@@ -145,13 +151,6 @@
 #define CONFIG_CMDLINE_EDITING
 
 /*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128 * 1024) /* regular stack */
-
-/*-----------------------------------------------------------------------
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS	1