X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx31ads.h;h=c4513d2df7d8d6e25a13c3b9104efd346d31dd9e;hb=9e8f4be34520fac696119454ed66eda9029f6d5e;hp=5286e1f538c20c3effe80258d4c78cf7e4b88cb2;hpb=0a0b606faaec4afb3f750b09aa4df1e40a39dcb8;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index 5286e1f..c4513d2 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -3,36 +3,26 @@ * * Configuration settings for the MX31ADS Freescale board. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H #define __CONFIG_H -#include +#include /* High Level Configuration Options */ -#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ -#define CONFIG_MX31 1 /* in a mx31 */ -#define CONFIG_MX31_HCLK_FREQ 26000000 /* RedBoot says 26MHz */ -#define CONFIG_MX31_CLK32 32000 +#define CONFIG_MX31 1 /* This is a mx31 */ + +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_SYS_TEXT_BASE 0xA0000000 + +#define CONFIG_MACH_TYPE MACH_TYPE_MX31ADS + /* * Disabled for now due to build problems under Debian and a significant increase * in the final file size: 144260 vs. 109536 Bytes. @@ -50,44 +40,48 @@ /* * Size of malloc() pool */ -#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024) -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) /* * Hardware drivers */ -#define CONFIG_MX31_UART 1 -#define CFG_MX31_UART1 1 +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_HARD_SPI 1 #define CONFIG_MXC_SPI 1 -#define CONFIG_MXC_SPI_IFACE 1 /* Default SPI interface number */ - -#define CONFIG_RTC_MC13783 1 +#define CONFIG_DEFAULT_SPI_BUS 1 +#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) +#define CONFIG_MXC_GPIO + +/* PMIC Controller */ +#define CONFIG_POWER +#define CONFIG_POWER_SPI +#define CONFIG_POWER_FSL +#define CONFIG_FSL_PMIC_BUS 1 +#define CONFIG_FSL_PMIC_CS 0 +#define CONFIG_FSL_PMIC_CLK 1000000 +#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) +#define CONFIG_FSL_PMIC_BITLEN 32 +#define CONFIG_RTC_MC13XXX /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /*********************************************************** * Command definition ***********************************************************/ - -#include - #define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP #define CONFIG_CMD_SPI #define CONFIG_CMD_DATE #define CONFIG_BOOTDELAY 3 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.23.168 -#define CONFIG_SERVERIP 192.168.23.2 -#define CONFIG_LOADADDR (CSD0_BASE + 0x800000) /* loadaddr env var */ +#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ @@ -107,9 +101,9 @@ "cp.b ${loadaddr} ${uboot_addr} ${filesize}; " \ "setenv filesize; saveenv\0" -#define CONFIG_DRIVER_CS8900 1 -#define CS8900_BASE 0xb4020300 -#define CS8900_BUS16 1 /* follow the Linux driver */ +#define CONFIG_CS8900 +#define CONFIG_CS8900_BASE 0xb4020300 +#define CONFIG_CS8900_BUS16 1 /* follow the Linux driver */ /* * The MX31ADS board seems to have a hardware "peculiarity" confirmed under @@ -126,75 +120,68 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0 /* memtest works on */ -#define CFG_MEMTEST_END 0x10000 +#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x10000 -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ - -#define CFG_LOAD_ADDR CONFIG_LOADADDR - -#define CFG_HZ 32000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_CMDLINE_EDITING 1 /*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - -/*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 CSD0_BASE #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_GBL_DATA_OFFSET) /*----------------------------------------------------------------------- * FLASH and environment organization */ -#define CFG_FLASH_BASE CS0_BASE -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 262 /* max number of sectors on one chip */ -#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */ -#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256KiB */ +#define CONFIG_SYS_FLASH_BASE CS0_BASE +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 262 /* max number of sectors on one chip */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */ +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256KiB */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_SECT_SIZE (32 * 1024) -#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) /* Address and size of Redundant Environment Sector */ -#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE) -#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE -/* S29WS256N NOR flash has 4 32KiB small sectors at the beginning and at the end. - * The rest of 32MiB is in 128KiB big sectors. U-Boot occupies the low 4 sectors, - * if we put environment next to it, we will have to occupy 128KiB for it. - * Putting it at the top of flash we use only 32KiB. */ -#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_ENV_SECT_SIZE) /*----------------------------------------------------------------------- * CFI FLASH driver setup */ -#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ -#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ +#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */ +#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ #define CONFIG_FLASH_SPANSION_S29WS_N 1 /* A non-standard buffered write algorithm */ -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ -#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ +#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */ /* * JFFS2 partitions */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #endif /* __CONFIG_H */