X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx31ads.h;h=b1b68528a30e6d2a4cd0fc80e48669ce0688d90a;hb=8b485ba12b0defa0c4ed3559789250238f8331a8;hp=c9d80ef0733b2470e34e27f302e882ff0df9073f;hpb=87a5d601031652293ec4b729fdb7ee01bbd940a8;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index c9d80ef..b1b6852 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -3,20 +3,7 @@
  *
  * Configuration settings for the MX31ADS Freescale board.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+ 
  */
 
 #ifndef __CONFIG_H
@@ -27,8 +14,6 @@
  /* High Level Configuration Options */
 #define CONFIG_ARM1136		1		/* This is an arm1136 CPU core */
 #define CONFIG_MX31		1		/* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ	26000000	/* RedBoot says 26MHz */
-#define CONFIG_MX31_CLK32	32768
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
@@ -60,8 +45,8 @@
  * Hardware drivers
  */
 
-#define CONFIG_MXC_UART	1
-#define CONFIG_SYS_MX31_UART1		1
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE	UART1_BASE
 
 #define CONFIG_HARD_SPI		1
 #define CONFIG_MXC_SPI		1
@@ -70,21 +55,20 @@
 #define CONFIG_MXC_GPIO
 
 /* PMIC Controller */
-#define CONFIG_PMIC
-#define CONFIG_PMIC_SPI
-#define CONFIG_PMIC_FSL
+#define CONFIG_POWER
+#define CONFIG_POWER_SPI
+#define CONFIG_POWER_FSL
 #define CONFIG_FSL_PMIC_BUS	1
 #define CONFIG_FSL_PMIC_CS	0
 #define CONFIG_FSL_PMIC_CLK	1000000
 #define CONFIG_FSL_PMIC_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
 #define CONFIG_FSL_PMIC_BITLEN	32
-#define CONFIG_RTC_MC13783
+#define CONFIG_RTC_MC13XXX
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
 
 /***********************************************************
  * Command definition
@@ -156,13 +140,6 @@
 #define CONFIG_CMDLINE_EDITING	1
 
 /*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
-
-/*-----------------------------------------------------------------------
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS	1