X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx31ads.h;h=081fbf69058047fc47719cd8321b43898d455463;hb=3d6ba91e793808d1612152e9f9b8c51b3ca6c926;hp=3c61911b04d3dc9048761cfe490fa3dae4cfee24;hpb=9571865e0d32b1bcf8a6625497d1cd5d4bbad354;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index 3c61911..081fbf6 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -35,6 +35,8 @@
 
 #define CONFIG_SYS_TEXT_BASE		0xA0000000
 
+#define CONFIG_MACH_TYPE	MACH_TYPE_MX31ADS
+
 /*
  * Disabled for now due to build problems under Debian and a significant increase
  * in the final file size: 144260 vs. 109536 Bytes.
@@ -58,26 +60,30 @@
  * Hardware drivers
  */
 
-#define CONFIG_MXC_UART	1
-#define CONFIG_SYS_MX31_UART1		1
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE	UART1_BASE
 
 #define CONFIG_HARD_SPI		1
 #define CONFIG_MXC_SPI		1
 #define CONFIG_DEFAULT_SPI_BUS	1
 #define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
+#define CONFIG_MXC_GPIO
 
-#define CONFIG_FSL_PMIC
+/* PMIC Controller */
+#define CONFIG_PMIC
+#define CONFIG_PMIC_SPI
+#define CONFIG_PMIC_FSL
 #define CONFIG_FSL_PMIC_BUS	1
 #define CONFIG_FSL_PMIC_CS	0
 #define CONFIG_FSL_PMIC_CLK	1000000
 #define CONFIG_FSL_PMIC_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
-#define CONFIG_RTC_MC13783	1
+#define CONFIG_FSL_PMIC_BITLEN	32
+#define CONFIG_RTC_MC13XXX
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
 
 /***********************************************************
  * Command definition
@@ -112,7 +118,6 @@
 		"cp.b ${loadaddr} ${uboot_addr} ${filesize}; "		\
 		"setenv filesize; saveenv\0"
 
-#define CONFIG_NET_MULTI
 #define CONFIG_CS8900
 #define CONFIG_CS8900_BASE	0xb4020300
 #define CONFIG_CS8900_BUS16		1	/* follow the Linux driver */
@@ -150,13 +155,6 @@
 #define CONFIG_CMDLINE_EDITING	1
 
 /*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
-
-/*-----------------------------------------------------------------------
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS	1