X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx28evk.h;h=f373b1e24e90e1beecd772bc9e0117098556f0c7;hb=83d290c56fab2d38cd1ab4c4cc7099559c1d5046;hp=10867a7b9ddac5f711dca64852d23f7dc2136b24;hpb=9ef671c9d4c70af3f8b21d8a31a89af4dc74d6b3;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 10867a7..f373b1e 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2011 Freescale Semiconductor, Inc.
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
@@ -5,36 +6,13 @@
  * Based on m28evk.h:
  * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
  * on behalf of DENX Software Engineering GmbH
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 #ifndef __CONFIGS_MX28EVK_H__
 #define __CONFIGS_MX28EVK_H__
 
 /* System configurations */
-#define CONFIG_MX28				/* i.MX28 SoC */
 #define CONFIG_MACH_TYPE	MACH_TYPE_MX28EVK
 
-/* U-Boot Commands */
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_VIDEO
-
 /* Memory configuration */
 #define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
 #define PHYS_SDRAM_1			0x40000000	/* Base address */
@@ -79,28 +57,14 @@
 
 /* UBI and NAND partitioning */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#define MTDIDS_DEFAULT			"nand0=gpmi-nand"
-#define MTDPARTS_DEFAULT			\
-	"mtdparts=gpmi-nand:"			\
-		"3m(bootloader)ro,"		\
-		"512k(environment),"		\
-		"512k(redundant-environment),"	\
-		"4m(kernel),"			\
-		"512k(fdt),"			\
-		"8m(ramdisk),"			\
-		"-(filesystem)"
 #endif
 
 /* FEC Ethernet on SoC */
 #ifdef	CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
+#define CONFIG_FEC_MXC_MDIO_BASE MXS_ENET0_BASE
 #define CONFIG_MX28_FEC_MAC_IN_OCOTP
 #endif
 
@@ -113,10 +77,6 @@
 #ifdef	CONFIG_CMD_USB
 #define CONFIG_EHCI_MXS_PORT1
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	1
-#define	CONFIG_USB_STORAGE
-#define	CONFIG_USB_HOST_ETHER
-#define	CONFIG_USB_ETHER_ASIX
-#define	CONFIG_USB_ETHER_SMSC95XX
 #endif
 
 /* SPI */
@@ -129,7 +89,6 @@
 #define CONFIG_SF_DEFAULT_BUS		2
 #define CONFIG_SF_DEFAULT_CS		0
 /* this may vary and depends on the installed chip */
-#define CONFIG_SPI_FLASH_SST
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
 #define CONFIG_SF_DEFAULT_SPEED		24000000
 #endif
@@ -140,7 +99,6 @@
 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_SPLASH_SCREEN
-#define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_VIDEO_BMP_GZIP
@@ -148,7 +106,6 @@
 #endif
 
 /* Boot Linux */
-#define CONFIG_BOOTDELAY	1
 #define CONFIG_BOOTFILE		"uImage"
 #define CONFIG_LOADADDR		0x42000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR