X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmx23_olinuxino.h;h=330f020f78965051a011d42b98e1b78d596a0a31;hb=504bf790da08db9b4a443566cf6ef577f9c7996a;hp=65203a0a215689c65de972efffe7ec460b9448bc;hpb=6eed3786c68c8a49d2986ac4f9f6e3071b769d41;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h
index 65203a0..330f020 100644
--- a/include/configs/mx23_olinuxino.h
+++ b/include/configs/mx23_olinuxino.h
@@ -1,38 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2013 Marek Vasut <marex@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 #ifndef __CONFIGS_MX23_OLINUXINO_H__
 #define __CONFIGS_MX23_OLINUXINO_H__
 
 /* System configurations */
-#define CONFIG_MX23				/* i.MX23 SoC */
 #define CONFIG_MACH_TYPE	4105
 
 /* U-Boot Commands */
-#define CONFIG_SYS_NO_FLASH
-#include <config_cmd_default.h>
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_LED
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_USB
 
 /* Memory configuration */
-#define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
 #define PHYS_SDRAM_1			0x40000000	/* Base address */
 #define PHYS_SDRAM_1_SIZE		0x08000000	/* Max 128 MB RAM */
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 
 /* Environment */
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_OVERWRITE
 
 /* Environment is in MMC */
@@ -43,29 +26,16 @@
 #endif
 
 /* Status LED */
-#define CONFIG_STATUS_LED
-#define CONFIG_GPIO_LED
-#define CONFIG_BOARD_SPECIFIC_LED
-#define STATUS_LED_BOOT		0
-#define STATUS_LED_BIT		MX23_PAD_SSP1_DETECT__GPIO_2_1
-#define STATUS_LED_STATE	STATUS_LED_ON
-#define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
 
 /* USB */
 #ifdef CONFIG_CMD_USB
 #define CONFIG_EHCI_MXS_PORT0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-#define CONFIG_USB_STORAGE
 #endif
 
 /* Ethernet */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
-#endif
 
 /* Booting Linux */
-#define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTFILE		"uImage"
 #define CONFIG_LOADADDR		0x42000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR