X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmvebu_armada-8k.h;h=b72a0a5b9ed7468b2ed48f14bbff10035d221814;hb=6d7dacf726ca043a3f5487549bbfa506c990c813;hp=86ae19c9fbe10ff56f1f3897eb713b139fd047a3;hpb=ec7483e34ea932fb68267dc0b1de30be51f271c9;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h
index 86ae19c..b72a0a5 100644
--- a/include/configs/mvebu_armada-8k.h
+++ b/include/configs/mvebu_armada-8k.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2016 Stefan Roese <sr@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef _CONFIG_MVEBU_ARMADA_8K_H
@@ -12,17 +11,10 @@
  */
 #define CONFIG_SYS_TCLK		250000000	/* 250MHz */
 
-#define CONFIG_DISPLAY_BOARDINFO_LATE
-
-#define	CONFIG_SYS_TEXT_BASE	0x00000000
-
 /* additions for new ARM relocation support */
 #define CONFIG_SYS_SDRAM_BASE	0x00000000
 
-#define CONFIG_NR_DRAM_BANKS	1
-
 /* auto boot */
-#define CONFIG_PREBOOT
 
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
 					  115200, 230400, 460800, 921600 }
@@ -37,8 +29,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS	/* enable memory tag */
 
 #define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
-#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
-		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
 
 /*
  * Size of malloc() pool
@@ -48,70 +38,37 @@
 /*
  * Other required minimal configurations
  */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_ARCH_CPU_INIT		/* call arch_cpu_init() */
 #define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
 #define CONFIG_SYS_MEMTEST_START 0x00800000	/* 8M */
 #define CONFIG_SYS_MEMTEST_END	0x00ffffff	/*(_16M -1) */
 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
 #define CONFIG_SYS_MAXARGS	32	/* max number of command args */
 
-#define CONFIG_SYS_ALT_MEMTEST
-
 /* End of 16M scrubbed by training in bootrom */
 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE + 0xFF0000)
 
-/*
- * SPI Flash configuration
- */
-#define CONFIG_KIRKWOOD_SPI
-#define CONFIG_ENV_SPI_BUS		0
-#define CONFIG_ENV_SPI_CS		0
-
-/* SPI NOR flash default params, used by sf commands */
-#define CONFIG_SF_DEFAULT_SPEED		1000000
-#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
-#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
-
-/* Environment in SPI NOR flash */
-#ifdef CONFIG_MVEBU_SPI_BOOT
-/* Environment in NAND flash */
-#endif
-
-#define CONFIG_ENV_OFFSET		0x180000 /* as Marvell U-Boot version */
-#define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
-#define CONFIG_ENV_SECT_SIZE		(64 << 10) /* 64KiB sectors */
+/* When runtime detection fails this is the default */
+#define CONFIG_SYS_MMC_ENV_DEV		0
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_MAX_CHIPS	1
 #define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
 
 /*
  * Ethernet Driver configuration
  */
 #define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
-#define CONFIG_PHY_GIGE		/* GbE speed/duplex detect */
 #define CONFIG_ARP_TIMEOUT	200
 #define CONFIG_NET_RETRY_COUNT	50
 
 #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
 
 /* USB ethernet */
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_MCS7830
-#define CONFIG_USB_ETHER_RTL8152
-#define CONFIG_USB_ETHER_SMSC95XX
 
 /*
  * SATA/SCSI/AHCI configuration
  */
-#define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_LIBATA
 #define CONFIG_LBA48
 #define CONFIG_SYS_64BIT_LBA
 
@@ -120,14 +77,30 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 					 CONFIG_SYS_SCSI_MAX_LUN)
 
-#define CONFIG_SUPPORT_VFAT
-
 /*
  * PCI configuration
  */
 #ifdef CONFIG_PCIE_DW_MVEBU
 #define CONFIG_E1000
-#define CONFIG_CMD_PCI
 #endif
 
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 1) \
+	func(MMC, mmc, 0) \
+	func(USB, usb, 0) \
+	func(SCSI, scsi, 0) \
+	func(PXE, pxe, na) \
+	func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+	"scriptaddr=0x4d00000\0"	\
+	"pxefile_addr_r=0x4e00000\0"	\
+	"fdt_addr_r=0x4f00000\0"	\
+	"kernel_addr_r=0x5000000\0"	\
+	"ramdisk_addr_r=0x8000000\0"	\
+	"fdtfile=marvell/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
+	BOOTENV
+
 #endif /* _CONFIG_MVEBU_ARMADA_8K_H */