X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmvebu_armada-8k.h;h=a6636e19e8bbec3d6c39e73f12472655b7e0dd00;hb=87f78478a4a1bf574db0b0e575ca37cf91fb187c;hp=087b186d8aafe4549df70431c5c999cc068aea7d;hpb=b0cf733933c3bc1b4ab353e16affabc60f863db5;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h
index 087b186..a6636e1 100644
--- a/include/configs/mvebu_armada-8k.h
+++ b/include/configs/mvebu_armada-8k.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2016 Stefan Roese <sr@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef _CONFIG_MVEBU_ARMADA_8K_H
@@ -12,19 +11,12 @@
  */
 #define CONFIG_SYS_TCLK		250000000	/* 250MHz */
 
-#define CONFIG_DISPLAY_BOARDINFO_LATE
-
-#define	CONFIG_SYS_TEXT_BASE	0x00000000
-
 /* additions for new ARM relocation support */
 #define CONFIG_SYS_SDRAM_BASE	0x00000000
 
-#define CONFIG_NR_DRAM_BANKS	1
-
 /* auto boot */
 #define CONFIG_PREBOOT
 
-#define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
 					  115200, 230400, 460800, 921600 }
 
@@ -38,8 +30,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS	/* enable memory tag */
 
 #define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
-#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
-		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
 
 /*
  * Size of malloc() pool
@@ -49,9 +39,6 @@
 /*
  * Other required minimal configurations
  */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
 #define CONFIG_ARCH_CPU_INIT		/* call arch_cpu_init() */
 #define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
 #define CONFIG_SYS_MEMTEST_START 0x00800000	/* 8M */
@@ -59,15 +46,12 @@
 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
 #define CONFIG_SYS_MAXARGS	32	/* max number of command args */
 
-#define CONFIG_SYS_ALT_MEMTEST
-
 /* End of 16M scrubbed by training in bootrom */
 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE + 0xFF0000)
 
 /*
  * SPI Flash configuration
  */
-#define CONFIG_KIRKWOOD_SPI
 #define CONFIG_ENV_SPI_BUS		0
 #define CONFIG_ENV_SPI_CS		0
 
@@ -76,36 +60,33 @@
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
 #define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
 
-/* Environment in SPI NOR flash */
-#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_OFFSET		0x180000 /* as Marvell U-Boot version */
 #define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
 #define CONFIG_ENV_SECT_SIZE		(64 << 10) /* 64KiB sectors */
 
-/* USB 2.0 */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
+/* When runtime detection fails this is the default */
+#define CONFIG_SYS_MMC_ENV_DEV		0
+
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_MAX_CHIPS	1
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
 
-/* USB 3.0 */
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3
+/*
+ * Ethernet Driver configuration
+ */
+#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
+#define CONFIG_ARP_TIMEOUT	200
+#define CONFIG_NET_RETRY_COUNT	50
 
-#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \
-					 CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS)
+#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
 
 /* USB ethernet */
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_MCS7830
-#define CONFIG_USB_ETHER_RTL8152
-#define CONFIG_USB_ETHER_SMSC95XX
 
 /*
  * SATA/SCSI/AHCI configuration
  */
-#define CONFIG_SCSI
-#define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_LIBATA
 #define CONFIG_LBA48
 #define CONFIG_SYS_64BIT_LBA
 
@@ -114,24 +95,30 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 					 CONFIG_SYS_SCSI_MAX_LUN)
 
-/* MMC/SD IP block */
-#define CONFIG_GENERIC_MMC
-
-#define CONFIG_SUPPORT_VFAT
-
-/* DISK Partition support */
-#define CONFIG_EFI_PARTITION
-#define CONFIG_ISO_PARTITION		/* Experimental */
-
-#define CONFIG_CMD_PART
-#define CONFIG_PARTITION_UUIDS
-
 /*
  * PCI configuration
  */
 #ifdef CONFIG_PCIE_DW_MVEBU
 #define CONFIG_E1000
-#define CONFIG_CMD_PCI
 #endif
 
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 1) \
+	func(MMC, mmc, 0) \
+	func(USB, usb, 0) \
+	func(SCSI, scsi, 0) \
+	func(PXE, pxe, na) \
+	func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+	"scriptaddr=0x4d00000\0"	\
+	"pxefile_addr_r=0x4e00000\0"	\
+	"fdt_addr_r=0x4f00000\0"	\
+	"kernel_addr_r=0x5000000\0"	\
+	"ramdisk_addr_r=0x8000000\0"	\
+	"fdtfile=marvell/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
+	BOOTENV
+
 #endif /* _CONFIG_MVEBU_ARMADA_8K_H */