X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmvebu_armada-8k.h;h=86ae19c9fbe10ff56f1f3897eb713b139fd047a3;hb=cbb89ed026e761b58a2568fea7b98135abcefe21;hp=7275f7903db44f60d7a951385c25f46cb4a3091d;hpb=274d3562fd38caa6dbb7aad518eb712c3ad1b6b7;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h
index 7275f79..86ae19c 100644
--- a/include/configs/mvebu_armada-8k.h
+++ b/include/configs/mvebu_armada-8k.h
@@ -13,7 +13,6 @@
 #define CONFIG_SYS_TCLK		250000000	/* 250MHz */
 
 #define CONFIG_DISPLAY_BOARDINFO_LATE
-#define CONFIG_ARCH_EARLY_INIT_R
 
 #define	CONFIG_SYS_TEXT_BASE	0x00000000
 
@@ -25,7 +24,6 @@
 /* auto boot */
 #define CONFIG_PREBOOT
 
-#define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
 					  115200, 230400, 460800, 921600 }
 
@@ -54,7 +52,6 @@
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_ARCH_CPU_INIT		/* call arch_cpu_init() */
-#define CONFIG_BOARD_EARLY_INIT_F	/* call board_init_f for early inits */
 #define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
 #define CONFIG_SYS_MEMTEST_START 0x00800000	/* 8M */
 #define CONFIG_SYS_MEMTEST_END	0x00ffffff	/*(_16M -1) */
@@ -79,20 +76,28 @@
 #define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
 
 /* Environment in SPI NOR flash */
-#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
+#ifdef CONFIG_MVEBU_SPI_BOOT
+/* Environment in NAND flash */
+#endif
+
 #define CONFIG_ENV_OFFSET		0x180000 /* as Marvell U-Boot version */
 #define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
 #define CONFIG_ENV_SECT_SIZE		(64 << 10) /* 64KiB sectors */
 
-/* USB 2.0 */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_MAX_CHIPS	1
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
 
-/* USB 3.0 */
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3
+/*
+ * Ethernet Driver configuration
+ */
+#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
+#define CONFIG_PHY_GIGE		/* GbE speed/duplex detect */
+#define CONFIG_ARP_TIMEOUT	200
+#define CONFIG_NET_RETRY_COUNT	50
 
-#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \
-					 CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS)
+#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
 
 /* USB ethernet */
 #define CONFIG_USB_HOST_ETHER
@@ -104,7 +109,6 @@
 /*
  * SATA/SCSI/AHCI configuration
  */
-#define CONFIG_SCSI
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_LIBATA
@@ -116,20 +120,8 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 					 CONFIG_SYS_SCSI_MAX_LUN)
 
-/* MMC/SD IP block */
-#define CONFIG_GENERIC_MMC
-
 #define CONFIG_SUPPORT_VFAT
 
-/* DISK Partition support */
-#define CONFIG_EFI_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_MAC_PARTITION
-#define CONFIG_ISO_PARTITION		/* Experimental */
-
-#define CONFIG_CMD_PART
-#define CONFIG_PARTITION_UUIDS
-
 /*
  * PCI configuration
  */