X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmv-common.h;h=ed271c2490a13543bcc9d91147841e63a3da15e1;hb=8f2fe0c86c56175dd7d5d0e3bc26bef41f224f03;hp=c458dd97347f13212e4ac88b0183404214caf309;hpb=8b485ba12b0defa0c4ed3559789250238f8331a8;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h
index c458dd9..ed271c2 100644
--- a/include/configs/mv-common.h
+++ b/include/configs/mv-common.h
@@ -35,16 +35,16 @@
 /*
  * CLKs configurations
  */
-#define CONFIG_SYS_HZ		1000
 
 /*
  * NS16550 Configuration
  */
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
 #define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
+#if !defined(CONFIG_DM_SERIAL)
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
 #define CONFIG_SYS_NS16550_COM1		MV_UART_CONSOLE_BASE
+#endif
 
 /*
  * Serial Port configuration
@@ -57,7 +57,7 @@
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
 					  115200,230400, 460800, 921600 }
 /* auto boot */
-#define CONFIG_BOOTDELAY	3	/* default enable autoboot */
+#define CONFIG_PREBOOT
 
 /*
  * For booting Linux, the board info and command line data
@@ -68,7 +68,6 @@
 #define CONFIG_INITRD_TAG	1	/* enable INITRD tag */
 #define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */
 
-#define	CONFIG_SYS_PROMPT	"Marvell>> "	/* Command Prompt */
 #define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
 #define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
 		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
@@ -93,7 +92,7 @@
 #define CONFIG_SYS_MEMTEST_START 0x00800000	/* 8M */
 #define CONFIG_SYS_MEMTEST_END	0x00ffffff	/*(_16M -1) */
 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+#define CONFIG_SYS_MAXARGS	32	/* max number of command args */
 
 /* ====> Include platform Common Definitions */
 #include <asm/arch/config.h>
@@ -121,16 +120,13 @@
  * Common SPI Flash configuration
  */
 #ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH		1
-#define CONFIG_SPI_FLASH_MACRONIX	1
 #endif
 
 /*
  * Common USB/EHCI configuration
  */
-#ifdef CONFIG_CMD_USB
+#if defined(CONFIG_CMD_USB) && !defined(CONFIG_DM)
 #define CONFIG_USB_EHCI		/* Enable EHCI USB support */
-#define CONFIG_USB_STORAGE
 #define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION
 #define CONFIG_SUPPORT_VFAT
@@ -140,10 +136,7 @@
  * File system
  */
 #ifdef CONFIG_SYS_MVFS
-#define CONFIG_CMD_EXT2
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #define CONFIG_RBTREE
 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */