X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmv-common.h;h=e460f69a08736a7769b0705675bef0ee54e3af20;hb=92832045c54586e9dffa082ff8cd8c2ef6040757;hp=1721fefd14651f279f37f482d2a93c95641e5beb;hpb=8bad6cb176a0e92ac8e7771fb68e5e0713edbf8e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h
index 1721fef..e460f69 100644
--- a/include/configs/mv-common.h
+++ b/include/configs/mv-common.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2010
  * Marvell Semiconductor <www.marvell.com>
  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -17,26 +16,20 @@
 #ifndef _MV_COMMON_H
 #define _MV_COMMON_H
 
+#include <linux/stringify.h>
+
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_MARVELL		1
 
 /*
  * Custom CONFIG_SYS_TEXT_BASE can be done in <board>.h
  */
-#ifndef CONFIG_SYS_TEXT_BASE
-#define	CONFIG_SYS_TEXT_BASE	0x00600000
-#endif /* CONFIG_SYS_TEXT_BASE */
 
 /* additions for new ARM relocation support */
 #define CONFIG_SYS_SDRAM_BASE	0x00000000
 
 /*
- * CLKs configurations
- */
-
-/*
  * NS16550 Configuration
  */
 #define CONFIG_SYS_NS16550_SERIAL
@@ -46,61 +39,28 @@
 #define CONFIG_SYS_NS16550_COM1		MV_UART_CONSOLE_BASE
 #endif
 
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
+#if defined(CONFIG_ARMADA_38X) && !defined(CONFIG_SYS_BAUDRATE_TABLE)
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 300, 600, 1200, 1800, 2400, 4800, \
+					  9600, 19200, 38400, 57600, 115200, \
+					  230400, 460800, 500000, 576000, \
+					  921600, 1000000, 1152000, 1500000, \
+					  2000000, 2500000, 3125000, 4000000, \
+					  5200000 }
+#endif
 
-#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
-					  115200,230400, 460800, 921600 }
 /* auto boot */
-#define CONFIG_PREBOOT
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
-#define CONFIG_INITRD_TAG	1	/* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */
 
 #define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
 
 /*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	(1024 * 1024 * 4) /* 4MiB for malloc() */
-
-/*
  * Other required minimal configurations
  */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_ARCH_CPU_INIT	/* call arch_cpu_init() */
-#define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
-#define CONFIG_SYS_MEMTEST_START 0x00800000	/* 8M */
-#define CONFIG_SYS_MEMTEST_END	0x00ffffff	/*(_16M -1) */
 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
 #define CONFIG_SYS_MAXARGS	32	/* max number of command args */
 
 /* ====> Include platform Common Definitions */
 #include <asm/arch/config.h>
 
-/*
- * DRAM Banks configuration, Custom config can be done in <board>.h
- */
-#ifndef CONFIG_NR_DRAM_BANKS
-#define CONFIG_NR_DRAM_BANKS	CONFIG_NR_DRAM_BANKS_MAX
-#else
-#if (CONFIG_NR_DRAM_BANKS > CONFIG_NR_DRAM_BANKS_MAX)
-#error CONFIG_NR_DRAM_BANKS Configurated more than available
-#endif
-#endif /* CONFIG_NR_DRAM_BANKS */
-
 /* ====> Include driver Common Definitions */
 /*
  * Common NAND configuration
@@ -109,18 +69,4 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #endif
 
-/*
- * Common SPI Flash configuration
- */
-#ifdef CONFIG_CMD_SF
-#endif
-
-/*
- * File system
- */
-#ifdef CONFIG_SYS_MVFS
-#define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
-#define CONFIG_MTD_PARTITIONS
-#endif
-
 #endif /* _MV_COMMON_H */