X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmv-common.h;h=a8030931635186289842beb116b03aeb5e2fe8f5;hb=9450ab2ba8d720bd9f73bccc0af2e2b5a2c2aaf1;hp=73e9a039ff3e5efbeb8578ea762cbec0aabd90a1;hpb=79493609c5300be6cc555ab8bd38971360b381f6;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h
index 73e9a03..a803093 100644
--- a/include/configs/mv-common.h
+++ b/include/configs/mv-common.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2010
  * Marvell Semiconductor <www.marvell.com>
  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -20,23 +19,15 @@
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_MARVELL		1
 
 /*
  * Custom CONFIG_SYS_TEXT_BASE can be done in <board>.h
  */
-#ifndef CONFIG_SYS_TEXT_BASE
-#define	CONFIG_SYS_TEXT_BASE	0x00600000
-#endif /* CONFIG_SYS_TEXT_BASE */
 
 /* additions for new ARM relocation support */
 #define CONFIG_SYS_SDRAM_BASE	0x00000000
 
 /*
- * CLKs configurations
- */
-
-/*
  * NS16550 Configuration
  */
 #define CONFIG_SYS_NS16550_SERIAL
@@ -46,16 +37,6 @@
 #define CONFIG_SYS_NS16550_COM1		MV_UART_CONSOLE_BASE
 #endif
 
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
-					  115200,230400, 460800, 921600 }
 /* auto boot */
 #define CONFIG_PREBOOT
 
@@ -69,8 +50,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */
 
 #define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
-#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
-		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
 
 /*
  * Size of malloc() pool
@@ -80,13 +59,7 @@
 /*
  * Other required minimal configurations
  */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_CONSOLE_INFO_QUIET	/* some code reduction */
 #define CONFIG_ARCH_CPU_INIT	/* call arch_cpu_init() */
-#define CONFIG_ARCH_MISC_INIT	/* call arch_misc_init() */
-#define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */
 #define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
 #define CONFIG_SYS_MEMTEST_START 0x00800000	/* 8M */
 #define CONFIG_SYS_MEMTEST_END	0x00ffffff	/*(_16M -1) */
@@ -96,17 +69,6 @@
 /* ====> Include platform Common Definitions */
 #include <asm/arch/config.h>
 
-/*
- * DRAM Banks configuration, Custom config can be done in <board>.h
- */
-#ifndef CONFIG_NR_DRAM_BANKS
-#define CONFIG_NR_DRAM_BANKS	CONFIG_NR_DRAM_BANKS_MAX
-#else
-#if (CONFIG_NR_DRAM_BANKS > CONFIG_NR_DRAM_BANKS_MAX)
-#error CONFIG_NR_DRAM_BANKS Configurated more than available
-#endif
-#endif /* CONFIG_NR_DRAM_BANKS */
-
 /* ====> Include driver Common Definitions */
 /*
  * Common NAND configuration
@@ -115,33 +77,4 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #endif
 
-/*
- * Common SPI Flash configuration
- */
-#ifdef CONFIG_CMD_SF
-#endif
-
-/*
- * Common USB/EHCI configuration
- */
-#if defined(CONFIG_CMD_USB) && !defined(CONFIG_DM)
-#define CONFIG_USB_EHCI		/* Enable EHCI USB support */
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-#define CONFIG_SUPPORT_VFAT
-#endif /* CONFIG_CMD_USB */
-
-/*
- * File system
- */
-#ifdef CONFIG_SYS_MVFS
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_UBIFS
-#define CONFIG_RBTREE
-#define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_LZO
-#endif
-
 #endif /* _MV_COMMON_H */