X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmpc7448hpc2.h;h=c0c95ed9426151121321a2b7217e1d57d22e22a3;hb=26750c8aee2383a026e0cf89e9310628d3a5a6a0;hp=a1783b200942b007ff4b37501519a0b238521d56;hpb=156feb90d200f186cdfd856d7f6f1878bb1bec1e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
index a1783b2..c0c95ed 100644
--- a/include/configs/mpc7448hpc2.h
+++ b/include/configs/mpc7448hpc2.h
@@ -42,16 +42,22 @@
 #define CONFIG_HIGH_BATS	/* High BATs supported */
 #define CONFIG_ALTIVEC		/* undef to disable */
 
+#define	CONFIG_SYS_TEXT_BASE	0xFF000000
+
 #define CONFIG_SYS_BOARD_NAME		"MPC7448 HPC II"
 #define CONFIG_IDENT_STRING	" Freescale MPC7448 HPC II"
 
 #define CONFIG_SYS_OCN_CLK		133000000	/* 133 MHz */
-#define CONFIG_SYS_CONFIG_BUS_CLK	133000000
+#define CONFIG_SYS_BUS_CLK		133000000
 
 #define CONFIG_SYS_CLK_SPREAD		/* Enable Spread-Spectrum Clock generation */
 
 #undef  CONFIG_ECC		/* disable ECC support */
 
+#ifndef __ASSEMBLY__
+#include <galileo/core.h>
+#endif
+
 /* Board-specific Initialization Functions to be called */
 #define CONFIG_SYS_BOARD_ASM_INIT
 #define CONFIG_BOARD_EARLY_INIT_F
@@ -79,7 +85,6 @@
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
 
-#define OF_CPU			"PowerPC,7448@0"
 #define OF_TSI			"tsi108@c0000000"
 #define OF_TBCLK		(bd->bi_busfreq / 8)
 #define OF_STDOUT_PATH		"/tsi108@c0000000/serial@7808"
@@ -102,7 +107,6 @@
 
 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_TSI108_CSR_RST_BASE+0x7808)
 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_TSI108_CSR_RST_BASE+0x7C08)
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds */
 #define CONFIG_ZERO_BOOTDELAY_CHECK
@@ -124,14 +128,11 @@
 
 /* Networking Configuration */
 
-#define KSEG1ADDR(a)	(a)	/* Needed by the rtl8139 driver */
-
 #define CONFIG_TSI108_ETH
 #define CONFIG_TSI108_ETH_NUM_PORTS	2
 
-#define CONFIG_NET_MULTI
 
-#define CONFIG_BOOTFILE		zImage.initrd.elf
+#define CONFIG_BOOTFILE		"zImage.initrd.elf"
 #define CONFIG_LOADADDR		0x400000
 
 /*-------------------------------------------------------------------------- */
@@ -179,6 +180,7 @@
  */
 #define CONFIG_VERSION_VARIABLE		1
 #define CONFIG_TSI108_I2C
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed */
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* I2C EEPROM page 1 */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1	/* Bytes of address */
@@ -221,10 +223,9 @@
  */
 #undef  CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR	0x07d00000	/* unused memory region */
-#define CONFIG_SYS_INIT_RAM_END	0x4000/* larger space - we have SDRAM initialized */
+#define CONFIG_SYS_INIT_RAM_SIZE	0x4000/* larger space - we have SDRAM initialized */
 
-#define CONFIG_SYS_GBL_DATA_SIZE	128/* size in bytes reserved for init data */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
@@ -253,7 +254,7 @@
 
 #define CONFIG_SYS_RESET_ADDRESS	0x3fffff00
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* u-boot code base */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* u-boot code base */
 #define CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
 
 /* Peripheral Device section */
@@ -302,8 +303,6 @@
 
 #define CONFIG_SYS_PCI_IO_SIZE		0x01000000	/* 16MB */
 
-#define _IO_BASE		0x00000000	/* points to PCI I/O space      */
-
 /* PCI Config Space mapping */
 #define CONFIG_SYS_PCI_CFG_BASE	0xfb000000	/* Changed from FE000000 */
 #define CONFIG_SYS_PCI_CFG_SIZE	0x01000000	/* 16MB */
@@ -403,13 +402,5 @@
 
 #define L2_INIT		0
 #define L2_ENABLE	(L2_INIT | L2CR_L2E)
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM	0x02	/* Software reboot */
 #define CONFIG_SYS_SERIAL_HANG_IN_EXCEPTION
 #endif	/* __CONFIG_H */