X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmpc7448hpc2.h;h=8068b4051a9dfb91447abe7ba07e7fc2bd07a688;hb=14d0a02a168b36e87665b8d7f42fa3e88263d26d;hp=483bc5305cc01dcb13b6110bb0c757a271f5c776;hpb=f61f1e150c84f5b9347fca79a4bc5f2286c545d2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
index 483bc53..8068b40 100644
--- a/include/configs/mpc7448hpc2.h
+++ b/include/configs/mpc7448hpc2.h
@@ -46,7 +46,7 @@
 #define CONFIG_IDENT_STRING	" Freescale MPC7448 HPC II"
 
 #define CONFIG_SYS_OCN_CLK		133000000	/* 133 MHz */
-#define CONFIG_SYS_CONFIG_BUS_CLK	133000000
+#define CONFIG_SYS_BUS_CLK		133000000
 
 #define CONFIG_SYS_CLK_SPREAD		/* Enable Spread-Spectrum Clock generation */
 
@@ -79,7 +79,6 @@
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
 
-#define OF_CPU			"PowerPC,7448@0"
 #define OF_TSI			"tsi108@c0000000"
 #define OF_TBCLK		(bd->bi_busfreq / 8)
 #define OF_STDOUT_PATH		"/tsi108@c0000000/serial@7808"
@@ -124,8 +123,6 @@
 
 /* Networking Configuration */
 
-#define KSEG1ADDR(a)	(a)	/* Needed by the rtl8139 driver */
-
 #define CONFIG_TSI108_ETH
 #define CONFIG_TSI108_ETH_NUM_PORTS	2
 
@@ -163,7 +160,7 @@
 #define CONFIG_CMD_SDRAM
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_FLASH
-#define CONFIG_CMD_ENV
+#define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PING
@@ -179,6 +176,7 @@
  */
 #define CONFIG_VERSION_VARIABLE		1
 #define CONFIG_TSI108_I2C
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed */
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* I2C EEPROM page 1 */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1	/* Bytes of address */
@@ -253,7 +251,7 @@
 
 #define CONFIG_SYS_RESET_ADDRESS	0x3fffff00
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* u-boot code base */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* u-boot code base */
 #define CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
 
 /* Peripheral Device section */
@@ -302,8 +300,6 @@
 
 #define CONFIG_SYS_PCI_IO_SIZE		0x01000000	/* 16MB */
 
-#define _IO_BASE		0x00000000	/* points to PCI I/O space      */
-
 /* PCI Config Space mapping */
 #define CONFIG_SYS_PCI_CFG_BASE	0xfb000000	/* Changed from FE000000 */
 #define CONFIG_SYS_PCI_CFG_SIZE	0x01000000	/* 16MB */