X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmpc7448hpc2.h;h=483bc5305cc01dcb13b6110bb0c757a271f5c776;hb=6d0f6bcf337c5261c08fabe12982178c2c489d76;hp=308a7b94299cc76a327afb2b24310e783bed7797;hpb=71edc271816ec82cf0550dd6980be2da3cc2ad9e;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index 308a7b9..483bc53 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -42,18 +42,18 @@ #define CONFIG_HIGH_BATS /* High BATs supported */ #define CONFIG_ALTIVEC /* undef to disable */ -#define CFG_BOARD_NAME "MPC7448 HPC II" +#define CONFIG_SYS_BOARD_NAME "MPC7448 HPC II" #define CONFIG_IDENT_STRING " Freescale MPC7448 HPC II" -#define CFG_OCN_CLK 133000000 /* 133 MHz */ -#define CFG_CONFIG_BUS_CLK 133000000 +#define CONFIG_SYS_OCN_CLK 133000000 /* 133 MHz */ +#define CONFIG_SYS_CONFIG_BUS_CLK 133000000 -#define CFG_CLK_SPREAD /* Enable Spread-Spectrum Clock generation */ +#define CONFIG_SYS_CLK_SPREAD /* Enable Spread-Spectrum Clock generation */ #undef CONFIG_ECC /* disable ECC support */ /* Board-specific Initialization Functions to be called */ -#define CFG_BOARD_ASM_INIT +#define CONFIG_SYS_BOARD_ASM_INIT #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_MISC_INIT_R @@ -70,10 +70,10 @@ #define CONFIG_BAUDRATE 115200 /* console baudrate = 115000 */ -/*#define CFG_HUSH_PARSER */ -#undef CFG_HUSH_PARSER +/*#define CONFIG_SYS_HUSH_PARSER */ +#undef CONFIG_SYS_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " /* Pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1 @@ -90,19 +90,19 @@ * * what to do: * If you have hacked a serial cable onto the second DUART channel, - * change the CFG_DUART port from 1 to 0 below. + * change the CONFIG_SYS_DUART port from 1 to 0 below. * */ #define CONFIG_CONS_INDEX 1 -#define CFG_NS16550 -#define CFG_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE 1 -#define CFG_NS16550_CLK CFG_OCN_CLK * 8 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_OCN_CLK * 8 -#define CFG_NS16550_COM1 (CFG_TSI108_CSR_RST_BASE+0x7808) -#define CFG_NS16550_COM2 (CFG_TSI108_CSR_RST_BASE+0x7C08) -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_TSI108_CSR_RST_BASE+0x7808) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_TSI108_CSR_RST_BASE+0x7C08) +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ #define CONFIG_ZERO_BOOTDELAY_CHECK @@ -137,7 +137,7 @@ /*-------------------------------------------------------------------------- */ #define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ -#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */ #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -172,37 +172,37 @@ /*set date in u-boot*/ #define CONFIG_RTC_M48T35A -#define CFG_NVRAM_BASE_ADDR 0xfc000000 -#define CFG_NVRAM_SIZE 0x8000 +#define CONFIG_SYS_NVRAM_BASE_ADDR 0xfc000000 +#define CONFIG_SYS_NVRAM_SIZE 0x8000 /* * Miscellaneous configurable options */ #define CONFIG_VERSION_VARIABLE 1 #define CONFIG_TSI108_I2C -#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C EEPROM page 1 */ -#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* I2C EEPROM page 1 */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)/* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)/* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ -#define CFG_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */ -#define CFG_LOAD_ADDR 0x00400000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x00400000 /* default load address */ -#define CFG_HZ 1000 /* decr freq: 1ms ticks */ +#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */ /* * Low Level Configuration Settings @@ -215,46 +215,46 @@ */ /* - * When locking data in cache you should point the CFG_INIT_RAM_ADDRESS + * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS * To an unused memory region. The stack will remain in cache until RAM * is initialized */ -#undef CFG_INIT_RAM_LOCK -#define CFG_INIT_RAM_ADDR 0x07d00000 /* unused memory region */ -#define CFG_INIT_RAM_END 0x4000/* larger space - we have SDRAM initialized */ +#undef CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0x07d00000 /* unused memory region */ +#define CONFIG_SYS_INIT_RAM_END 0x4000/* larger space - we have SDRAM initialized */ -#define CFG_GBL_DATA_SIZE 128/* size in bytes reserved for init data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_SIZE 128/* size in bytes reserved for init data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 /* first 256 MB of SDRAM */ -#define CFG_SDRAM1_BASE 0x10000000 /* next 256MB of SDRAM */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* first 256 MB of SDRAM */ +#define CONFIG_SYS_SDRAM1_BASE 0x10000000 /* next 256MB of SDRAM */ -#define CFG_SDRAM2_BASE 0x40000000 /* beginning of non-cacheable alias for SDRAM - first 256MB */ -#define CFG_SDRAM3_BASE 0x50000000 /* next Non-Cacheable 256MB of SDRAM */ +#define CONFIG_SYS_SDRAM2_BASE 0x40000000 /* beginning of non-cacheable alias for SDRAM - first 256MB */ +#define CONFIG_SYS_SDRAM3_BASE 0x50000000 /* next Non-Cacheable 256MB of SDRAM */ -#define CFG_PCI_PFM_BASE 0x80000000 /* Prefetchable (cacheable) PCI/X PFM and SDRAM OCN (128MB+128MB) */ +#define CONFIG_SYS_PCI_PFM_BASE 0x80000000 /* Prefetchable (cacheable) PCI/X PFM and SDRAM OCN (128MB+128MB) */ -#define CFG_PCI_MEM32_BASE 0xE0000000 /* Non-Cacheable PCI/X MEM and SDRAM OCN (128MB+128MB) */ +#define CONFIG_SYS_PCI_MEM32_BASE 0xE0000000 /* Non-Cacheable PCI/X MEM and SDRAM OCN (128MB+128MB) */ -#define CFG_MISC_REGION_BASE 0xf0000000 /* Base Address for (PCI/X + Flash) region */ +#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000 /* Base Address for (PCI/X + Flash) region */ -#define CFG_FLASH_BASE 0xff000000 /* Base Address of Flash device */ -#define CFG_FLASH_BASE2 0xfe000000 /* Alternate Flash Base Address */ +#define CONFIG_SYS_FLASH_BASE 0xff000000 /* Base Address of Flash device */ +#define CONFIG_SYS_FLASH_BASE2 0xfe000000 /* Alternate Flash Base Address */ #define CONFIG_VERY_BIG_RAM /* we will use up to 256M memory for cause we are short of BATS */ #define PCI0_IO_BASE_BOOTM 0xfd000000 -#define CFG_RESET_ADDRESS 0x3fffff00 -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MONITOR_BASE TEXT_BASE /* u-boot code base */ -#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */ +#define CONFIG_SYS_RESET_ADDRESS 0x3fffff00 +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* u-boot code base */ +#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */ /* Peripheral Device section */ @@ -262,8 +262,8 @@ * Resources on the Tsi108 */ -#define CFG_TSI108_CSR_RST_BASE 0xC0000000 /* Tsi108 CSR base after reset */ -#define CFG_TSI108_CSR_BASE CFG_TSI108_CSR_RST_BASE /* Runtime Tsi108 CSR base */ +#define CONFIG_SYS_TSI108_CSR_RST_BASE 0xC0000000 /* Tsi108 CSR base after reset */ +#define CONFIG_SYS_TSI108_CSR_BASE CONFIG_SYS_TSI108_CSR_RST_BASE /* Runtime Tsi108 CSR base */ #define ENABLE_PCI_CSR_BAR /* enables access to Tsi108 CSRs from the PCI/X bus */ @@ -287,74 +287,74 @@ /* PCI MEMORY MAP section */ /* PCI view of System Memory */ -#define CFG_PCI_MEMORY_BUS 0x00000000 -#define CFG_PCI_MEMORY_PHYS 0x00000000 -#define CFG_PCI_MEMORY_SIZE 0x80000000 +#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000 +#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000 +#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000 /* PCI Memory Space */ -#define CFG_PCI_MEM_BUS (CFG_PCI_MEM_PHYS) -#define CFG_PCI_MEM_PHYS (CFG_PCI_MEM32_BASE) /* 0xE0000000 */ -#define CFG_PCI_MEM_SIZE 0x10000000 /* 256 MB space for PCI/X Mem + SDRAM OCN */ +#define CONFIG_SYS_PCI_MEM_BUS (CONFIG_SYS_PCI_MEM_PHYS) +#define CONFIG_SYS_PCI_MEM_PHYS (CONFIG_SYS_PCI_MEM32_BASE) /* 0xE0000000 */ +#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 /* 256 MB space for PCI/X Mem + SDRAM OCN */ /* PCI I/O Space */ -#define CFG_PCI_IO_BUS 0x00000000 -#define CFG_PCI_IO_PHYS 0xfa000000 /* Changed from fd000000 */ +#define CONFIG_SYS_PCI_IO_BUS 0x00000000 +#define CONFIG_SYS_PCI_IO_PHYS 0xfa000000 /* Changed from fd000000 */ -#define CFG_PCI_IO_SIZE 0x01000000 /* 16MB */ +#define CONFIG_SYS_PCI_IO_SIZE 0x01000000 /* 16MB */ #define _IO_BASE 0x00000000 /* points to PCI I/O space */ /* PCI Config Space mapping */ -#define CFG_PCI_CFG_BASE 0xfb000000 /* Changed from FE000000 */ -#define CFG_PCI_CFG_SIZE 0x01000000 /* 16MB */ +#define CONFIG_SYS_PCI_CFG_BASE 0xfb000000 /* Changed from FE000000 */ +#define CONFIG_SYS_PCI_CFG_SIZE 0x01000000 /* 16MB */ -#define CFG_IBAT0U 0xFE0003FF -#define CFG_IBAT0L 0xFE000002 +#define CONFIG_SYS_IBAT0U 0xFE0003FF +#define CONFIG_SYS_IBAT0L 0xFE000002 -#define CFG_IBAT1U 0x00007FFF -#define CFG_IBAT1L 0x00000012 +#define CONFIG_SYS_IBAT1U 0x00007FFF +#define CONFIG_SYS_IBAT1L 0x00000012 -#define CFG_IBAT2U 0x80007FFF -#define CFG_IBAT2L 0x80000022 +#define CONFIG_SYS_IBAT2U 0x80007FFF +#define CONFIG_SYS_IBAT2L 0x80000022 -#define CFG_IBAT3U 0x00000000 -#define CFG_IBAT3L 0x00000000 +#define CONFIG_SYS_IBAT3U 0x00000000 +#define CONFIG_SYS_IBAT3L 0x00000000 -#define CFG_IBAT4U 0x00000000 -#define CFG_IBAT4L 0x00000000 +#define CONFIG_SYS_IBAT4U 0x00000000 +#define CONFIG_SYS_IBAT4L 0x00000000 -#define CFG_IBAT5U 0x00000000 -#define CFG_IBAT5L 0x00000000 +#define CONFIG_SYS_IBAT5U 0x00000000 +#define CONFIG_SYS_IBAT5L 0x00000000 -#define CFG_IBAT6U 0x00000000 -#define CFG_IBAT6L 0x00000000 +#define CONFIG_SYS_IBAT6U 0x00000000 +#define CONFIG_SYS_IBAT6L 0x00000000 -#define CFG_IBAT7U 0x00000000 -#define CFG_IBAT7L 0x00000000 +#define CONFIG_SYS_IBAT7U 0x00000000 +#define CONFIG_SYS_IBAT7L 0x00000000 -#define CFG_DBAT0U 0xE0003FFF -#define CFG_DBAT0L 0xE000002A +#define CONFIG_SYS_DBAT0U 0xE0003FFF +#define CONFIG_SYS_DBAT0L 0xE000002A -#define CFG_DBAT1U 0x00007FFF -#define CFG_DBAT1L 0x00000012 +#define CONFIG_SYS_DBAT1U 0x00007FFF +#define CONFIG_SYS_DBAT1L 0x00000012 -#define CFG_DBAT2U 0x00000000 -#define CFG_DBAT2L 0x00000000 +#define CONFIG_SYS_DBAT2U 0x00000000 +#define CONFIG_SYS_DBAT2L 0x00000000 -#define CFG_DBAT3U 0xC0000003 -#define CFG_DBAT3L 0xC000002A +#define CONFIG_SYS_DBAT3U 0xC0000003 +#define CONFIG_SYS_DBAT3L 0xC000002A -#define CFG_DBAT4U 0x00000000 -#define CFG_DBAT4L 0x00000000 +#define CONFIG_SYS_DBAT4U 0x00000000 +#define CONFIG_SYS_DBAT4L 0x00000000 -#define CFG_DBAT5U 0x00000000 -#define CFG_DBAT5L 0x00000000 +#define CONFIG_SYS_DBAT5U 0x00000000 +#define CONFIG_SYS_DBAT5L 0x00000000 -#define CFG_DBAT6U 0x00000000 -#define CFG_DBAT6L 0x00000000 +#define CONFIG_SYS_DBAT6U 0x00000000 +#define CONFIG_SYS_DBAT6L 0x00000000 -#define CFG_DBAT7U 0x00000000 -#define CFG_DBAT7L 0x00000000 +#define CONFIG_SYS_DBAT7U 0x00000000 +#define CONFIG_SYS_DBAT7L 0x00000000 /* I2C addresses for the two DIMM SPD chips */ #define DIMM0_I2C_ADDR 0x51 @@ -365,21 +365,21 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization */ -#define CFG_MAX_FLASH_BANKS 1 /* Flash can be at one of two addresses */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Flash can be at one of two addresses */ #define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */ -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, /* CFG_FLASH_BASE2 */ } +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, /* CONFIG_SYS_FLASH_BASE2 */ } #define CONFIG_FLASH_CFI_DRIVER -#define CFG_FLASH_CFI -#define CFG_WRITE_SWAPPED_DATA +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_WRITE_SWAPPED_DATA #define PHYS_FLASH_SIZE 0x01000000 -#define CFG_MAX_FLASH_SECT (128) +#define CONFIG_SYS_MAX_FLASH_SECT (128) #define CONFIG_ENV_IS_IN_NVRAM #define CONFIG_ENV_ADDR 0xFC000000 @@ -390,16 +390,16 @@ /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /*----------------------------------------------------------------------- * L2CR setup -- make sure this is right for your board! * look in include/mpc74xx.h for the defines used here */ -#undef CFG_L2 +#undef CONFIG_SYS_L2 #define L2_INIT 0 #define L2_ENABLE (L2_INIT | L2CR_L2E) @@ -411,5 +411,5 @@ */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_SERIAL_HANG_IN_EXCEPTION +#define CONFIG_SYS_SERIAL_HANG_IN_EXCEPTION #endif /* __CONFIG_H */