X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmpc5121ads.h;h=cbfcb7099b0bd25127c2bc435bf866b656168cf8;hb=553f09823cced77296825f615f00321d932bf914;hp=07e7747dbe1da7b1a2ebae2ce939c6adae413dfe;hpb=14d0a02a168b36e87665b8d7f42fa3e88263d26d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index 07e7747..cbfcb70 100644
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -48,6 +48,8 @@
 #define CONFIG_MPC512X		1	/* MPC512X family */
 #define CONFIG_FSL_DIU_FB	1	/* FSL DIU */
 
+#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
+
 /* video */
 #undef CONFIG_VIDEO
 
@@ -268,10 +270,10 @@
 
 /* Use SRAM for initial stack */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_SRAM_BASE		/* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_SRAM_SIZE		/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_SRAM_SIZE		/* Size of used area in RAM */
 
 #define CONFIG_SYS_GBL_DATA_SIZE	0x100			/* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE		/* Start of monitor */
@@ -375,6 +377,20 @@
 #define CONFIG_SYS_I2C_RTC_ADDR		0x68	/* at address 0x68		*/
 
 /*
+ * USB  Support
+ */
+#define CONFIG_CMD_USB
+
+#if defined(CONFIG_CMD_USB)
+#define CONFIG_USB_EHCI				/* Enable EHCI Support	*/
+#define CONFIG_USB_EHCI_FSL			/* On a FSL platform	*/
+#define CONFIG_EHCI_MMIO_BIG_ENDIAN		/* With big-endian regs	*/
+#define CONFIG_EHCI_DESC_BIG_ENDIAN
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
+#endif
+
+/*
  * Environment
  */
 #define CONFIG_ENV_IS_IN_FLASH	1
@@ -442,10 +458,15 @@
 					"mpc5121.nand:-(data)"
 
 
-#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2)
+#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2) || defined(CONFIG_CMD_USB)
+
 #define CONFIG_DOS_PARTITION
 #define CONFIG_MAC_PARTITION
 #define CONFIG_ISO_PARTITION
+
+#define CONFIG_CMD_FAT
+#define CONFIG_SUPPORT_VFAT
+
 #endif /* defined(CONFIG_CMD_IDE) */
 
 /*
@@ -496,14 +517,6 @@
 
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */