X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmpc5121ads.h;h=6e6af62ccad5b7d5ca5a3da7c2ecdd07fa714ade;hb=345be0b26734c560e8b33531ab21a1272179c5c3;hp=19006ac725834ecf57c35faee9ee4ec4589185e7;hpb=29c6fbe0471afd7ffa41fcb2103eec5b53294897;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index 19006ac..6e6af62 100644
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -46,16 +46,16 @@
  */
 #define CONFIG_E300		1	/* E300 Family */
 #define CONFIG_MPC512X		1	/* MPC512X family */
-#define CONFIG_FSL_DIU_FB	1	/* FSL DIU */
 
 #define	CONFIG_SYS_TEXT_BASE	0xFFF00000
 
 /* video */
-#undef CONFIG_VIDEO
-
-#ifdef CONFIG_VIDEO
+#ifdef CONFIG_FSL_DIU_FB
+#define CONFIG_SYS_DIU_ADDR	(CONFIG_SYS_IMMR + 0x2100)
+#define CONFIG_VIDEO
 #define CONFIG_CMD_BMP
 #define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
@@ -74,7 +74,6 @@
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_SYS_IMMR		0x80000000
-#define CONFIG_SYS_DIU_ADDR		(CONFIG_SYS_IMMR+0x2100)
 
 #define CONFIG_SYS_MEMTEST_START	0x00200000      /* memtest region */
 #define CONFIG_SYS_MEMTEST_END		0x00400000
@@ -243,7 +242,6 @@
 #define CONFIG_SYS_NAND_BASE            0x40000000
 
 #define CONFIG_SYS_MAX_NAND_DEVICE      2
-#define NAND_MAX_CHIPS                  CONFIG_SYS_MAX_NAND_DEVICE
 #define CONFIG_SYS_NAND_SELECT_DEVICE	/* driver supports mutipl. chips */
 
 /*
@@ -260,6 +258,8 @@
  */
 #define CONFIG_SYS_CPLD_BASE		0x82000000
 #define CONFIG_SYS_CPLD_SIZE		0x00010000	/* 64 KB */
+#define CONFIG_SYS_CS2_START		CONFIG_SYS_CPLD_BASE
+#define CONFIG_SYS_CS2_SIZE		CONFIG_SYS_CPLD_SIZE
 
 #define CONFIG_SYS_SRAM_BASE		0x30000000
 #define CONFIG_SYS_SRAM_SIZE		0x00020000	/* 128 KB */
@@ -270,10 +270,9 @@
 
 /* Use SRAM for initial stack */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_SRAM_BASE		/* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_SRAM_SIZE		/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_SRAM_SIZE		/* Size of used area in RAM */
 
-#define CONFIG_SYS_GBL_DATA_SIZE	0x100			/* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE		/* Start of monitor */
@@ -293,6 +292,7 @@
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE	3	/* console is on PSC3 */
+#define CONFIG_SYS_PSC3
 #if CONFIG_PSC_CONSOLE != 3
 #error CONFIG_PSC_CONSOLE must be 3
 #endif
@@ -309,10 +309,30 @@
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
 #ifdef  CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /*
+ * Clocks in use
+ */
+#define SCCR1_CLOCKS_EN	(CLOCK_SCCR1_CFG_EN |				\
+			 CLOCK_SCCR1_DDR_EN |				\
+			 CLOCK_SCCR1_FEC_EN |				\
+			 CLOCK_SCCR1_LPC_EN |				\
+			 CLOCK_SCCR1_NFC_EN |				\
+			 CLOCK_SCCR1_PATA_EN |				\
+			 CLOCK_SCCR1_PCI_EN |				\
+			 CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) |	\
+			 CLOCK_SCCR1_PSCFIFO_EN |			\
+			 CLOCK_SCCR1_TPR_EN)
+
+#define SCCR2_CLOCKS_EN	(CLOCK_SCCR2_DIU_EN |		\
+			 CLOCK_SCCR2_I2C_EN |		\
+			 CLOCK_SCCR2_MEM_EN |		\
+			 CLOCK_SCCR2_SPDIF_EN |		\
+			 CLOCK_SCCR2_USB1_EN |		\
+			 CLOCK_SCCR2_USB2_EN)
+
+/*
  * PCI
  */
 #ifdef CONFIG_PCI
@@ -364,7 +384,6 @@
  * Ethernet configuration
  */
 #define CONFIG_MPC512x_FEC	1
-#define CONFIG_NET_MULTI
 #define CONFIG_PHY_ADDR		0x1
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_FEC_AN_TIMEOUT	1
@@ -517,14 +536,6 @@
 
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
@@ -536,8 +547,8 @@
 #define CONFIG_TIMESTAMP
 
 #define CONFIG_HOSTNAME		mpc5121ads
-#define CONFIG_BOOTFILE		mpc5121ads/uImage
-#define CONFIG_ROOTPATH		/opt/eldk/ppc_6xx
+#define CONFIG_BOOTFILE		"mpc5121ads/uImage"
+#define CONFIG_ROOTPATH		"/opt/eldk/ppc_6xx"
 
 #define CONFIG_LOADADDR		400000	/* default location for tftp and bootm */