X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmotionpro.h;h=bdcae59e0df4207e8ed7685a4fcad2144a6979e3;hb=22a9ea974bdf18e6adad5c4f80b1c60ef384690c;hp=b3f16d5e7c411183845e16dd06b6e2e400190184;hpb=50bd0057ba8fceeb48533f8b1a652ccd0e170838;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index b3f16d5..bdcae59 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -37,6 +37,8 @@ #define CONFIG_HIGH_BATS 1 /* High BATs supported */ +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + /* * BOOTP options */ @@ -45,29 +47,27 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ #include #define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BEDBUG +#define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_DTT +#define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MII -#define CONFIG_CMD_BEDBUG #define CONFIG_CMD_NET #define CONFIG_CMD_PING -#define CONFIG_CMD_IDE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_I2C -#define CONFIG_CMD_DATE -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_DTT - +#define CONFIG_CMD_REGINFO /* * Serial console configuration @@ -77,11 +77,11 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - /* * Ethernet configuration */ #define CONFIG_MPC5xxx_FEC 1 +#define CONFIG_MPC5xxx_FEC_MII100 #define CONFIG_PHY_ADDR 0x2 #define CONFIG_PHY_TYPE 0x79c874 #define CONFIG_RESET_PHY_R 1 @@ -98,11 +98,14 @@ #define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \ "press \"\" to stop\n", bootdelay +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + #define CONFIG_ETHADDR 00:50:C2:40:10:00 #define CONFIG_OVERWRITE_ETHADDR_ONCE 1 #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ - /* * Default environment settings */ @@ -114,21 +117,22 @@ "serverip=192.168.1.1\0" \ "gatewayip=192.168.1.1\0" \ "console=ttyPSC0,115200\0" \ - "u-boot_addr=100000\0" \ - "kernel_addr=200000\0" \ - "fdt_addr=400000\0" \ - "ramdisk_addr=500000\0" \ + "u-boot_addr=400000\0" \ + "kernel_addr=400000\0" \ + "fdt_addr=700000\0" \ + "ramdisk_addr=800000\0" \ "multi_image_addr=800000\0" \ - "rootpath=/opt/eldk-4.1/ppc_6xx\0" \ - "u-boot=/tftpboot/motionpro/u-boot.bin\0" \ - "bootfile=/tftpboot/motionpro/uImage\0" \ - "fdt_file=/tftpboot/motionpro/motionpro.dtb\0" \ - "ramdisk_file=/tftpboot/motionpro/uRamdisk\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "u-boot=motionpro/u-boot.bin\0" \ + "bootfile=motionpro/uImage\0" \ + "fdt_file=motionpro/motionpro.dtb\0" \ + "ramdisk_file=motionpro/uRamdisk\0" \ "multi_image_file=kernel+initrd+dtb.img\0" \ "load=tftp ${u-boot_addr} ${u-boot}\0" \ - "update=prot off fff00000 fff3ffff; era fff00000 fff3ffff; " \ + "update=prot off fff00000 +${filesize};" \ + "era fff00000 +${filesize}; " \ "cp.b ${u-boot_addr} fff00000 ${filesize};" \ - "prot on fff00000 fff3ffff\0" \ + "prot on fff00000 +${filesize}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ @@ -157,24 +161,20 @@ */ #define CONFIG_BOARD_EARLY_INIT_R 1 - /* * Low level configuration */ - /* * Clock configuration: SYS_XTALIN = 33MHz */ #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 - /* * Set IPB speed to 100MHz */ #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK - /* * Memory map */ @@ -183,7 +183,7 @@ * Setting MBAR to otherwise will cause system hang when using SmartDMA such * as network commands. */ -#define CONFIG_SYS_MBAR 0xf0000000 +#define CONFIG_SYS_MBAR 0xf0000000 #define CONFIG_SYS_SDRAM_BASE 0x00000000 /* @@ -191,22 +191,21 @@ * (e.g., by the BDI). Otherwise we must specify the default boot-up value of * MBAR, as given in the doccumentation. */ -#if TEXT_BASE == 0x00100000 +#if CONFIG_SYS_TEXT_BASE == 0x00100000 #define CONFIG_SYS_DEFAULT_MBAR 0xf0000000 -#else /* TEXT_BASE != 0x00100000 */ +#else /* CONFIG_SYS_TEXT_BASE != 0x00100000 */ #define CONFIG_SYS_DEFAULT_MBAR 0x80000000 #define CONFIG_SYS_LOWBOOT 1 -#endif /* TEXT_BASE == 0x00100000 */ +#endif /* CONFIG_SYS_TEXT_BASE == 0x00100000 */ /* Use SRAM until RAM will be available */ #define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE +#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) #define CONFIG_SYS_RAMBOOT 1 #endif @@ -215,7 +214,6 @@ #define CONFIG_SYS_MALLOC_LEN (1024 << 10) /* 1 MiB for malloc() */ #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */ - /* * Chip selects configuration */ @@ -248,7 +246,6 @@ #define CONFIG_SYS_CS_BURST 0x00000000 #define CONFIG_SYS_CS_DEADCYCLE 0x22222222 - /* * SDRAM configuration */ @@ -258,7 +255,6 @@ #define SDRAM_CONTROL 0x504f0000 #define SDRAM_MODE 0x00cd0000 - /* * Flash configuration */ @@ -274,7 +270,9 @@ /* * MTD configuration */ -#define CONFIG_JFFS2_CMDLINE +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_FLASH_CFI_MTD #define MTDIDS_DEFAULT "nor0=motionpro-0" #define MTDPARTS_DEFAULT "mtdparts=motionpro-0:" \ "13m(fs),2m(kernel),256k(uboot)," \ @@ -294,7 +292,6 @@ #define CONFIG_SYS_ATA_STRIDE 4 #define CONFIG_DOS_PARTITION - /* * I2C configuration */ @@ -303,7 +300,6 @@ #define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ #define CONFIG_SYS_I2C_SLAVE 0x7F - /* * EEPROM configuration */ @@ -312,14 +308,12 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 /* 2ms/cycle + 3ms extra */ #define CONFIG_SYS_I2C_MULTI_EEPROMS 1 /* 2 EEPROMs (addr:50,52) */ - /* * RTC configuration */ #define CONFIG_RTC_DS1337 1 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 - /* * Status LED configuration */ @@ -341,14 +335,12 @@ extern void __led_toggle(led_id_t id); extern void __led_set(led_id_t id, int state); #endif /* __ASSEMBLY__ */ - /* * Temperature sensor */ #define CONFIG_DTT_LM75 1 #define CONFIG_DTT_SENSORS { 0x49 } - /* * Environment settings */ @@ -376,13 +368,11 @@ extern void __led_set(led_id_t id, int state); */ #define CONFIG_SYS_GPS_PORT_CONFIG 0x1105a004 - /* * Motion-PRO's CPLD revision control register */ #define CPLD_REV_REGISTER (CONFIG_SYS_CS2_START + 0x06) - /* * Miscellaneous configurable options */ @@ -401,19 +391,14 @@ extern void __led_set(led_id_t id, int state); #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Various low-level settings */ #define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI #define CONFIG_SYS_HID0_FINAL HID0_ICE -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ - /* Not needed for MPC 5xxx U-Boot, but used by tools/updater */ #define CONFIG_SYS_RESET_ADDRESS 0xfff00100