X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmicroblaze-generic.h;h=b8b08974c7e79d62e45db7906d79c03baeb91555;hb=54f80dd2908af0b851816cf062edf2d454948397;hp=28f67e30d5d236906131bdf7e225478e6bbc0a7d;hpb=068415eadefbbc81f14d4ce61fcf7a7eb39650d4;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 28f67e3..b8b0897 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -11,48 +11,11 @@
 /* Microblaze is microblaze_0 */
 #define XILINX_FSL_NUMBER	3
 
-/* MicroBlaze CPU */
-#define	MICROBLAZE_V5		1
-
-#define CONFIG_SYS_BOOTM_LEN	(64 * 1024 * 1024)
-
 /* uart */
 /* The following table includes the supported baudrates */
-# define CONFIG_SYS_BAUDRATE_TABLE \
+# define CFG_SYS_BAUDRATE_TABLE \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
-/* Stack location before relocation */
-#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_TEXT_BASE - \
-					 CONFIG_SYS_MALLOC_F_LEN)
-
-#ifdef CONFIG_CFI_FLASH
-/* ?empty sector */
-# define CONFIG_SYS_FLASH_EMPTY_INFO	1
-/* max number of memory banks */
-# define CONFIG_SYS_MAX_FLASH_BANKS	1
-/* max number of sectors on one chip */
-# define CONFIG_SYS_MAX_FLASH_SECT	2048
-#endif
-
-#define CONFIG_ICACHE
-#define CONFIG_DCACHE
-
-#ifndef XILINX_DCACHE_BYTE_SIZE
-#define XILINX_DCACHE_BYTE_SIZE	32768
-#endif
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/* size of console buffer */
-#define	CONFIG_SYS_CBSIZE	512
-/* max number of command args */
-#define	CONFIG_SYS_MAXARGS	15
-
-#define	CONFIG_HOSTNAME		"microblaze-generic"
-
 /* architecture dependent code */
 #if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP)
 #define BOOT_TARGET_DEVICES_PXE(func)	func(PXE, pxe, na)
@@ -128,36 +91,8 @@
 	BOOTENV
 #endif
 
-#if defined(CONFIG_XILINX_AXIEMAC)
-# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	1
-#endif
-
 /* SPL part */
 
-#define CONFIG_SYS_UBOOT_BASE		CONFIG_SYS_TEXT_BASE
-
-/* for booting directly linux */
-#define CONFIG_SYS_FDT_BASE		(CONFIG_SYS_TEXT_BASE + \
-					0x40000)
-
-#define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_TEXT_BASE + \
-					 0x1000000)
-
-/* SP location before relocation, must use scratch RAM */
-/* BRAM start */
-#define CONFIG_SYS_INIT_RAM_ADDR	0x0
-/* BRAM size - will be generated */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x100000
-
-# define CONFIG_SPL_STACK_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE)
-
-/* Just for sure that there is a space for stack */
-#define CONFIG_SPL_STACK_SIZE		0x100
-
-#define CONFIG_SPL_MAX_FOOTPRINT	(CONFIG_SYS_INIT_RAM_SIZE - \
-					 CONFIG_SYS_INIT_RAM_ADDR - \
-					 CONFIG_SYS_MALLOC_F_LEN - \
-					 CONFIG_SPL_STACK_SIZE)
+#define CFG_SYS_UBOOT_BASE		CONFIG_TEXT_BASE
 
 #endif	/* __CONFIG_H */