X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmicroblaze-generic.h;h=2cc4b8a1a36c1c91bdd10e6cebffb1fb48baae26;hb=268d05f552e5408c16dab5a963d85e2fb4f883aa;hp=cc7f81955ed8ec20d09f1dd806a9e1b54e5b1730;hpb=1b330894bd40cb0d7ef37bb761d104820f794aae;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index cc7f819..2cc4b8a 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -95,12 +95,10 @@
 /* use buffered writes (20x faster) */
 # define	CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
 # ifdef	RAMENV
-#  define CONFIG_ENV_IS_NOWHERE	1
 #  define CONFIG_ENV_SIZE	0x1000
 #  define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
 
 # else	/* FLASH && !RAMENV */
-#  define CONFIG_ENV_IS_IN_FLASH	1
 /* 128K(one sector) for env */
 #  define CONFIG_ENV_SECT_SIZE	0x20000
 #  define CONFIG_ENV_ADDR \
@@ -117,12 +115,10 @@
 # define CONFIG_SF_DEFAULT_CS		XILINX_SPI_FLASH_CS
 
 # ifdef	RAMENV
-#  define CONFIG_ENV_IS_NOWHERE	1
 #  define CONFIG_ENV_SIZE	0x1000
 #  define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
 
 # else	/* SPIFLASH && !RAMENV */
-#  define CONFIG_ENV_IS_IN_SPI_FLASH	1
 #  define CONFIG_ENV_SPI_MODE		SPI_MODE_3
 #  define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
 #  define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
@@ -135,7 +131,6 @@
 #else /* !SPIFLASH */
 
 /* ENV in RAM */
-# define CONFIG_ENV_IS_NOWHERE	1
 # define CONFIG_ENV_SIZE	0x1000
 # define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
 #endif /* !SPIFLASH */
@@ -165,45 +160,16 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_MFSL
-
-#if defined(FLASH)
-# undef CONFIG_CMD_UBIFS
-
-# if !defined(RAMENV)
-#  define CONFIG_CMD_SAVES
-# endif
-
-#else
-#if defined(SPIFLASH)
-
-# if !defined(RAMENV)
-#  define CONFIG_CMD_SAVES
-# endif
-#else
-# undef CONFIG_CMD_UBIFS
-#endif
-#endif
-
 #if defined(CONFIG_CMD_JFFS2)
 # define CONFIG_MTD_PARTITIONS
 #endif
 
-#if defined(CONFIG_CMD_UBIFS)
-# define CONFIG_LZO
-#endif
-
 #if defined(CONFIG_CMD_UBI)
 # define CONFIG_MTD_PARTITIONS
-# define CONFIG_RBTREE
 #endif
 
 #if defined(CONFIG_MTD_PARTITIONS)
 /* MTD partitions */
-#define CONFIG_CMD_MTDPARTS	/* mtdparts command line support */
 #define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
 #define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=flash-0"
@@ -216,16 +182,12 @@
 
 /* size of console buffer */
 #define	CONFIG_SYS_CBSIZE	512
- /* print buffer size */
-#define	CONFIG_SYS_PBSIZE \
-		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 /* max number of command args */
 #define	CONFIG_SYS_MAXARGS	15
 #define	CONFIG_SYS_LONGHELP
 /* default load address */
 #define	CONFIG_SYS_LOAD_ADDR	0
 
-#define	CONFIG_BOOTARGS		"root=romfs"
 #define	CONFIG_HOSTNAME		XILINX_BOARD_NAME
 #define	CONFIG_BOOTCOMMAND	"base 0;tftp 11000000 image.img;bootm"
 
@@ -253,15 +215,12 @@
 
 #if defined(CONFIG_XILINX_AXIEMAC)
 # define CONFIG_MII		1
-# define CONFIG_PHY_GIGE	1
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	1
 # define CONFIG_PHY_ATHEROS	1
 # define CONFIG_PHY_BROADCOM	1
 # define CONFIG_PHY_DAVICOM	1
 # define CONFIG_PHY_LXT		1
 # define CONFIG_PHY_MARVELL	1
-# define CONFIG_PHY_MICREL	1
-# define CONFIG_PHY_MICREL_KSZ9021
 # define CONFIG_PHY_NATSEMI	1
 # define CONFIG_PHY_REALTEK	1
 # define CONFIG_PHY_VITESSE	1
@@ -270,11 +229,8 @@
 #endif
 
 /* SPL part */
-#define CONFIG_CMD_SPL
 #define CONFIG_SPL_FRAMEWORK
 
-#define CONFIG_SPL_LDSCRIPT	"arch/microblaze/cpu/u-boot-spl.lds"
-
 #ifdef CONFIG_SYS_FLASH_BASE
 # define CONFIG_SYS_UBOOT_BASE		CONFIG_SYS_FLASH_BASE
 #endif