X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmeson64_android.h;h=c0e977abb01fb9efb7a462906a0073c84c800897;hb=4db386655a889b6466d2c3f40839ad21205c6d21;hp=a4d9779667f43df93ca90cc84a4881161a4d6c6e;hpb=f0fcab6f8e11cee6d6b81a08fbfc641f6fcce0ec;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/meson64_android.h b/include/configs/meson64_android.h
index a4d9779..c0e977a 100644
--- a/include/configs/meson64_android.h
+++ b/include/configs/meson64_android.h
@@ -9,58 +9,200 @@
 #ifndef __MESON64_ANDROID_CONFIG_H
 #define __MESON64_ANDROID_CONFIG_H
 
-#define CONFIG_SYS_MMC_ENV_DEV	2
-#define CONFIG_SYS_MMC_ENV_PART	1
+#include <linux/sizes.h>
 
+#ifndef BOOT_PARTITION
+#define BOOT_PARTITION "boot"
+#endif
+
+#ifndef LOGO_PARTITION
+#define LOGO_PARTITION "logo"
+#endif
+
+#ifndef CONTROL_PARTITION
+#define CONTROL_PARTITION "misc"
+#endif
+
+#ifndef EXTRA_ANDROID_ENV_SETTINGS
+#define EXTRA_ANDROID_ENV_SETTINGS ""
+#endif
+
+#if defined(CONFIG_CMD_AVB)
+#define AVB_VERIFY_CHECK \
+	"if test \"${force_avb}\" -eq 1; then " \
+		"if run avb_verify; then " \
+			"echo AVB verification OK.;" \
+			"setenv bootargs \"$bootargs $avb_bootargs\";" \
+		"else " \
+			"echo AVB verification failed.;" \
+		"exit; fi;" \
+	"else " \
+		"setenv bootargs \"$bootargs androidboot.verifiedbootstate=orange\";" \
+		"echo Running without AVB...; "\
+	"fi;"
+
+#define AVB_VERIFY_CMD "avb_verify=avb init ${mmcdev}; avb verify $slot_suffix;\0"
+#else
+#define AVB_VERIFY_CHECK ""
+#define AVB_VERIFY_CMD ""
+#endif
+
+#if defined(CONFIG_CMD_AB_SELECT)
+#define ANDROIDBOOT_GET_CURRENT_SLOT_CMD "get_current_slot=" \
+	"if part number mmc ${mmcdev} " CONTROL_PARTITION " control_part_number; " \
+	"then " \
+		"echo " CONTROL_PARTITION \
+			" partition number:${control_part_number};" \
+		"ab_select current_slot mmc ${mmcdev}:${control_part_number};" \
+	"else " \
+		"echo " CONTROL_PARTITION " partition not found;" \
+	"fi;\0"
+
+#define AB_SELECT_SLOT \
+	"run get_current_slot; " \
+	"if test -e \"${current_slot}\"; " \
+	"then " \
+		"setenv slot_suffix _${current_slot}; " \
+	"else " \
+		"echo current_slot not found;" \
+		"exit;" \
+	"fi;"
+
+#define AB_SELECT_ARGS \
+	"setenv bootargs_ab androidboot.slot_suffix=${slot_suffix}; " \
+	"echo A/B cmdline addition: ${bootargs_ab};" \
+	"setenv bootargs ${bootargs} ${bootargs_ab};"
+
+#define AB_BOOTARGS " androidboot.force_normal_boot=1"
+#define RECOVERY_PARTITION "boot"
+#else
+#define AB_SELECT_SLOT ""
+#define AB_SELECT_ARGS " "
+#define ANDROIDBOOT_GET_CURRENT_SLOT_CMD ""
+#define AB_BOOTARGS " "
+#define RECOVERY_PARTITION "recovery"
+#endif
+
+#if defined(CONFIG_CMD_ABOOTIMG)
+/*
+ * Prepares complete device tree blob for current board (for Android boot).
+ *
+ * Boot image or recovery image should be loaded into $loadaddr prior to running
+ * these commands. The logic of these commnads is next:
+ *
+ *   1. Read correct DTB for current SoC/board from boot image in $loadaddr
+ *      to $fdtaddr
+ *   2. Merge all needed DTBO for current board from 'dtbo' partition into read
+ *      DTB
+ *   3. User should provide $fdtaddr as 3rd argument to 'bootm'
+ */
+#define PREPARE_FDT \
+	"echo Preparing FDT...; " \
+	"if test $board_name = sei510; then " \
+		"echo \"  Reading DTB for sei510...\"; " \
+		"setenv dtb_index 0;" \
+	"elif test $board_name = sei610; then " \
+		"echo \"  Reading DTB for sei610...\"; " \
+		"setenv dtb_index 1;" \
+	"elif test $board_name = vim3l; then " \
+		"echo \"  Reading DTB for vim3l...\"; " \
+		"setenv dtb_index 2;" \
+	"elif test $board_name = vim3; then " \
+		"echo \"  Reading DTB for vim3...\"; " \
+		"setenv dtb_index 3;" \
+	"else " \
+		"echo Error: Android boot is not supported for $board_name; " \
+		"exit; " \
+	"fi; " \
+	"abootimg get dtb --index=$dtb_index dtb_start dtb_size; " \
+	"cp.b $dtb_start $fdt_addr_r $dtb_size; " \
+	"fdt addr $fdt_addr_r  0x80000; " \
+	"if test $board_name = sei510; then " \
+		"echo \"  Reading DTBO for sei510...\"; " \
+		"setenv dtbo_index 0;" \
+	"elif test $board_name = sei610; then " \
+		"echo \"  Reading DTBO for sei610...\"; " \
+		"setenv dtbo_index 1;" \
+	"elif test $board_name = vim3l; then " \
+		"echo \"  Reading DTBO for vim3l...\"; " \
+		"setenv dtbo_index 2;" \
+	"elif test $board_name = vim3; then " \
+		"echo \"  Reading DTBO for vim3...\"; " \
+		"setenv dtbo_index 3;" \
+	"else " \
+		"echo Error: Android boot is not supported for $board_name; " \
+		"exit; " \
+	"fi; " \
+	"part start mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_start; " \
+	"part size mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_size; " \
+	"mmc read ${dtboaddr} ${p_dtbo_start} ${p_dtbo_size}; " \
+	"echo \"  Applying DTBOs...\"; " \
+	"adtimg addr $dtboaddr; " \
+	"adtimg get dt --index=$dtbo_index dtbo0_addr; " \
+	"fdt apply $dtbo0_addr;" \
+	"setenv bootargs \"$bootargs androidboot.dtbo_idx=$dtbo_index \";"\
+
+#define BOOT_CMD "bootm ${loadaddr} ${loadaddr} ${fdt_addr_r};"
+
+#else
+#define PREPARE_FDT " "
+#define BOOT_CMD "bootm ${loadaddr};"
+#endif
 
 #define BOOTENV_DEV_FASTBOOT(devtypeu, devtypel, instance) \
 	"bootcmd_fastboot=" \
-		"sm reboot_reason reason;" \
 		"setenv run_fastboot 0;" \
 		"if test \"${boot_source}\" = \"usb\"; then " \
 			"echo Fastboot forced by usb rom boot;" \
 			"setenv run_fastboot 1;" \
 		"fi;" \
-		"if gpt verify mmc ${mmcdev} ${partitions}; then; " \
-		"else " \
-			"echo Broken MMC partition scheme;" \
-			"setenv run_fastboot 1;" \
+		"if test \"${run_fastboot}\" -eq 0; then " \
+			"if gpt verify mmc ${mmcdev} ${partitions}; then; " \
+			"else " \
+				"echo Broken MMC partition scheme;" \
+				"setenv run_fastboot 1;" \
+			"fi; " \
 		"fi;" \
-		"if test \"${reason}\" = \"bootloader\" -o " \
-			"\"${reason}\" = \"fastboot\"; then " \
-			"echo Fastboot asked by reboot reason;" \
-			"setenv run_fastboot 1;" \
-		"fi;" \
-		"if test \"${skip_fastboot}\" -eq 1; then " \
-			"echo Fastboot skipped by environment;" \
-			"setenv run_fastboot 0;" \
-		"fi;" \
-		"if test \"${force_fastboot}\" -eq 1; then " \
-			"echo Fastboot forced by environment;" \
-			"setenv run_fastboot 1;" \
+		"if test \"${run_fastboot}\" -eq 0; then " \
+			"if bcb load " __stringify(CONFIG_FASTBOOT_FLASH_MMC_DEV) " " \
+			CONTROL_PARTITION "; then " \
+				"if bcb test command = bootonce-bootloader; then " \
+					"echo BCB: Bootloader boot...; " \
+					"bcb clear command; bcb store; " \
+					"setenv run_fastboot 1;" \
+				"elif bcb test command = boot-fastboot; then " \
+					"echo BCB: fastboot userspace boot...; " \
+					"setenv force_recovery 1;" \
+				"fi; " \
+			"else " \
+				"echo Warning: BCB is corrupted or does not exist; " \
+			"fi;" \
 		"fi;" \
 		"if test \"${run_fastboot}\" -eq 1; then " \
 			"echo Running Fastboot...;" \
-			"fastboot 0;" \
+			"fastboot " __stringify(CONFIG_FASTBOOT_USB_DEV) "; " \
 		"fi\0"
 
 #define BOOTENV_DEV_NAME_FASTBOOT(devtypeu, devtypel, instance)	\
 		"fastboot "
 
-/* TOFIX: Run actual recovery instead of fastboot */
 #define BOOTENV_DEV_RECOVERY(devtypeu, devtypel, instance) \
 	"bootcmd_recovery=" \
 		"pinmux dev pinctrl@14;" \
 		"pinmux dev pinctrl@40;" \
-		"sm reboot_reason reason;" \
 		"setenv run_recovery 0;" \
 		"if run check_button; then " \
 			"echo Recovery button is pressed;" \
 			"setenv run_recovery 1;" \
-		"elif test \"${reason}\" = \"recovery\" -o " \
-			  "\"${reason}\" = \"update\"; then " \
-			"echo Recovery asked by reboot reason;" \
-			"setenv run_recovery 1;" \
+		"fi; " \
+		"if bcb load " __stringify(CONFIG_FASTBOOT_FLASH_MMC_DEV) " " \
+		CONTROL_PARTITION "; then " \
+			"if bcb test command = boot-recovery; then " \
+				"echo BCB: Recovery boot...; " \
+				"setenv run_recovery 1;" \
+			"fi;" \
+		"else " \
+			"echo Warning: BCB is corrupted or does not exist; " \
 		"fi;" \
 		"if test \"${skip_recovery}\" -eq 1; then " \
 			"echo Recovery skipped by environment;" \
@@ -72,7 +214,20 @@
 		"fi;" \
 		"if test \"${run_recovery}\" -eq 1; then " \
 			"echo Running Recovery...;" \
-			"fastboot 0;" \
+			"mmc dev ${mmcdev};" \
+			"setenv bootargs \"${bootargs} androidboot.serialno=${serial#}\";" \
+			AB_SELECT_SLOT \
+			AB_SELECT_ARGS \
+			AVB_VERIFY_CHECK \
+			"part start mmc ${mmcdev} " RECOVERY_PARTITION "${slot_suffix} boot_start;" \
+			"part size mmc ${mmcdev} " RECOVERY_PARTITION "${slot_suffix} boot_size;" \
+			"if mmc read ${loadaddr} ${boot_start} ${boot_size}; then " \
+				PREPARE_FDT \
+				"echo Running Android Recovery...;" \
+				BOOT_CMD \
+			"fi;" \
+			"echo Failed to boot Android...;" \
+			"reset;" \
 		"fi\0"
 
 #define BOOTENV_DEV_NAME_RECOVERY(devtypeu, devtypel, instance)	\
@@ -80,54 +235,74 @@
 
 #define BOOTENV_DEV_SYSTEM(devtypeu, devtypel, instance) \
 	"bootcmd_system=" \
-		"echo Loading Android boot partition...;" \
+		"echo Loading Android " BOOT_PARTITION " partition...;" \
 		"mmc dev ${mmcdev};" \
-		"setenv bootargs ${bootargs} console=${console} androidboot.serialno=${serial#};" \
-		"part start mmc ${mmcdev} ${bootpart} boot_start;" \
-		"part size mmc ${mmcdev} ${bootpart} boot_size;" \
+		"setenv bootargs ${bootargs} androidboot.serialno=${serial#};" \
+		AB_SELECT_SLOT \
+		AB_SELECT_ARGS \
+		AVB_VERIFY_CHECK \
+		"part start mmc ${mmcdev} " BOOT_PARTITION "${slot_suffix} boot_start;" \
+		"part size mmc ${mmcdev} " BOOT_PARTITION "${slot_suffix} boot_size;" \
 		"if mmc read ${loadaddr} ${boot_start} ${boot_size}; then " \
+			PREPARE_FDT \
+			"setenv bootargs \"${bootargs} " AB_BOOTARGS "\"  ; " \
 			"echo Running Android...;" \
-			"bootm ${loadaddr};" \
+			BOOT_CMD \
 		"fi;" \
-		"echo Failed to boot Android...;" \
-		"reset\0"
+		"echo Failed to boot Android...;\0"
 
 #define BOOTENV_DEV_NAME_SYSTEM(devtypeu, devtypel, instance)	\
 		"system "
 
+#define BOOTENV_DEV_PANIC(devtypeu, devtypel, instance) \
+	"bootcmd_panic=" \
+		"fastboot " __stringify(CONFIG_FASTBOOT_USB_DEV) "; " \
+		"reset\0"
+
+#define BOOTENV_DEV_NAME_PANIC(devtypeu, devtypel, instance)	\
+		"panic "
+
 #define BOOT_TARGET_DEVICES(func) \
 	func(FASTBOOT, fastboot, na) \
 	func(RECOVERY, recovery, na) \
 	func(SYSTEM, system, na) \
+	func(PANIC, panic, na) \
 
 #define PREBOOT_LOAD_LOGO \
-	"mmc dev ${mmcdev};" \
-	"part start mmc ${mmcdev} ${logopart} boot_start;" \
-	"part size mmc ${mmcdev} ${logopart} boot_size;" \
-	"if mmc read ${loadaddr} ${boot_start} ${boot_size}; then " \
+	"if test \"${boot_source}\" != \"usb\" && " \
+		"gpt verify mmc ${mmcdev} ${partitions}; then; " \
+		"mmc dev ${mmcdev};" \
+		"part start mmc ${mmcdev} " LOGO_PARTITION " boot_start;" \
+		"part size mmc ${mmcdev} " LOGO_PARTITION " boot_size;" \
+		"if mmc read ${loadaddr} ${boot_start} ${boot_size}; then " \
 			"bmp display ${loadaddr} m m;" \
+		"fi;" \
 	"fi;"
 
-#define CONFIG_EXTRA_ENV_SETTINGS                                     \
+#define CFG_EXTRA_ENV_SETTINGS                                     \
+	EXTRA_ANDROID_ENV_SETTINGS                                    \
 	"partitions=" PARTS_DEFAULT "\0"                              \
 	"mmcdev=2\0"                                                  \
-	"bootpart=1\0"                                                \
-	"logopart=2\0"                                                \
+	"fastboot_raw_partition_bootloader=0x1 0xfff mmcpart 1\0"     \
+	"fastboot_raw_partition_bootenv=0x0 0xfff mmcpart 2\0"        \
+	ANDROIDBOOT_GET_CURRENT_SLOT_CMD                              \
+	AVB_VERIFY_CMD                                                \
+	"force_avb=0\0"                                               \
 	"gpio_recovery=88\0"                                          \
 	"check_button=gpio input ${gpio_recovery};test $? -eq 0;\0"   \
 	"load_logo=" PREBOOT_LOAD_LOGO "\0"			      \
-	"console=/dev/ttyAML0\0"                                      \
-	"bootargs=no_console_suspend\0"                               \
 	"stdin=" STDIN_CFG "\0"                                       \
 	"stdout=" STDOUT_CFG "\0"                                     \
 	"stderr=" STDOUT_CFG "\0"                                     \
-	"loadaddr=0x01000000\0"                                       \
+	"dtboaddr=0x08200000\0"                                       \
+	"loadaddr=0x01080000\0"                                       \
 	"fdt_addr_r=0x01000000\0"                                     \
 	"scriptaddr=0x08000000\0"                                     \
 	"kernel_addr_r=0x01080000\0"                                  \
 	"pxefile_addr_r=0x01080000\0"                                 \
 	"ramdisk_addr_r=0x13000000\0"                                 \
-	"fdtfile=amlogic/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" BOOTENV
+	"fdtfile=amlogic/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0"        \
+	BOOTENV
 
 #include <configs/meson64.h>