X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmeesc.h;h=af8bf3ad8e7285693995262c3be55114a3d78eec;hb=43ade93bdb0c8bd57382be810a05b3793749ce85;hp=d2ec83cd1f42b14e7b1863d941552ede5fd510e4;hpb=3be2bdf5dc69b3142c1162a59bc67191c9077567;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/meesc.h b/include/configs/meesc.h index d2ec83c..af8bf3a 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -3,7 +3,7 @@ * Stelian Pop * Lead Tech Design * - * (C) Copyright 2009-2011 + * (C) Copyright 2009-2015 * Daniel Gorsulowski * esd electronic system design gmbh * @@ -27,25 +27,15 @@ * Since the linker has to swallow that define, we must use a pure * hex number here! */ -#define CONFIG_SYS_TEXT_BASE 0x20002000 - -/* - * since a number of boards are not being listed in linux - * arch/arm/tools/mach-types any more, the mach-types have to be - * defined here - */ -#define MACH_TYPE_MEESC 2165 -#define MACH_TYPE_ETHERCAN2 2407 +#define CONFIG_SYS_TEXT_BASE 0x21F00000 /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* 32.768 kHz crystal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq */ /* Misc CPU related */ #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_ARCH_CPU_INIT -#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG #define CONFIG_SERIAL_TAG @@ -53,17 +43,12 @@ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_MISC_INIT_R /* Call misc_init_r */ -#define CONFIG_DISPLAY_BOARDINFO /* call checkboard() */ -#define CONFIG_DISPLAY_CPUINFO /* display cpu info and speed */ #define CONFIG_PREBOOT /* enable preboot variable */ /* * Hardware drivers */ -/* required until arch/arm/include/asm/arch-at91/at91sam9263.h is reworked */ -#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP - /* general purpose I/O */ #define CONFIG_AT91_GPIO @@ -73,9 +58,6 @@ #define CONFIG_USART_ID ATMEL_ID_SYS #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK - /* * BOOTP options */ @@ -87,16 +69,10 @@ /* * Command line configuration. */ -#include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_IMLS - -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP + +#ifdef CONFIG_SYS_USE_NANDFLASH #define CONFIG_CMD_NAND -#define CONFIG_CMD_USB +#endif /* LED */ #define CONFIG_AT91_LED @@ -105,9 +81,12 @@ * SDRAM: 1 bank, min 32, max 128 MB * Initialized before u-boot gets started. */ +#define PHYS_SDRAM ATMEL_BASE_CS1 /* 0x20000000 */ +#define PHYS_SDRAM_SIZE 0x02000000 /* 32 MByte */ + #define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE 0x20000000 /* ATMEL_BASE_CS1 */ -#define CONFIG_SYS_SDRAM_SIZE 0x02000000 +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_SIZE #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x00100000) #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01E00000) @@ -125,7 +104,6 @@ #ifdef CONFIG_SYS_USE_DATAFLASH # define CONFIG_ATMEL_DATAFLASH_SPI # define CONFIG_HAS_DATAFLASH -# define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) # define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 # define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ # define AT91_SPI_CLK 15000000 @@ -140,33 +118,20 @@ #ifdef CONFIG_CMD_NAND # define CONFIG_NAND_ATMEL # define CONFIG_SYS_MAX_NAND_DEVICE 1 -# define CONFIG_SYS_NAND_BASE 0x40000000 /* ATMEL_BASE_CS3 */ +# define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 /* 0x40000000 */ # define CONFIG_SYS_NAND_DBW_8 # define CONFIG_SYS_NAND_MASK_ALE (1 << 21) # define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -# define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15 -# define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 22 +# define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15) +# define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(22) #endif /* Ethernet */ #define CONFIG_MACB #define CONFIG_RMII -#define CONFIG_FIT #define CONFIG_NET_RETRY_COUNT 20 #undef CONFIG_RESET_PHY_R -/* USB */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_OHCI_NEW -#define CONFIG_DOS_PARTITION -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 - -/* CAN */ -#define CONFIG_AT91_CAN - /* hw-controller addresses */ #define CONFIG_ET1100_BASE 0x70000000 @@ -190,13 +155,13 @@ #endif -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_CBSIZE 512 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE /* * Size of malloc() pool