X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmeesc.h;h=86ce5f2397e0d515dee632b2e93bac9c78d029db;hb=23c5d253d5fa4586e2342934a0a8ec21c1f21a36;hp=e100cb41cec8753849423eac893b02a04afdbb78;hpb=6dfbf49c6dc3687efbc6d7f9e25bb46ed2d6c833;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index e100cb4..86ce5f2 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * (C) Copyright 2009-2011
@@ -9,23 +9,7 @@
  *
  * Configuation settings for the esd MEESC board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -45,10 +29,17 @@
  */
 #define CONFIG_SYS_TEXT_BASE		0x20002000
 
+/*
+ * since a number of boards are not being listed in linux
+ * arch/arm/tools/mach-types any more, the mach-types have to be
+ * defined here
+ */
+#define MACH_TYPE_MEESC			2165
+#define MACH_TYPE_ETHERCAN2		2407
+
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768	/* 32.768 kHz crystal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	16000000/* 16.0 MHz crystal */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq */
 
 /* Misc CPU related */
 #define CONFIG_SKIP_LOWLEVEL_INIT
@@ -60,7 +51,6 @@
 #define CONFIG_REVISION_TAG
 #define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */
 #define CONFIG_MISC_INIT_R			/* Call misc_init_r */
-#undef CONFIG_USE_IRQ				/* don't need IRQ/FIQ stuff */
 
 #define CONFIG_DISPLAY_BOARDINFO		/* call checkboard() */
 #define CONFIG_DISPLAY_CPUINFO			/* display cpu info and speed */
@@ -81,7 +71,6 @@
 #define CONFIG_USART_BASE		ATMEL_BASE_DBGU
 #define CONFIG_USART_ID			ATMEL_ID_SYS
 #define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{115200, 19200, 38400, 57600, 9600}
 
 #define CONFIG_BOOTDELAY		3
 #define CONFIG_ZERO_BOOTDELAY_CHECK
@@ -154,21 +143,20 @@
 # define CONFIG_SYS_NAND_DBW_8
 # define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
 # define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
-# define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIO_PORTD, 15
-# define CONFIG_SYS_NAND_READY_PIN		AT91_PIO_PORTA, 22
-# define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
+# define CONFIG_SYS_NAND_ENABLE_PIN		GPIO_PIN_PD(15)
+# define CONFIG_SYS_NAND_READY_PIN		GPIO_PIN_PA(22)
 #endif
 
 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RMII
-#define CONFIG_NET_MULTI
 #define CONFIG_FIT
 #define CONFIG_NET_RETRY_COUNT			20
 #undef CONFIG_RESET_PHY_R
 
 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
@@ -202,7 +190,6 @@
 
 #endif
 
-#define CONFIG_SYS_PROMPT		"=> "
 #define CONFIG_SYS_CBSIZE		512
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
@@ -216,10 +203,4 @@
 #define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + \
 					128*1024, 0x1000)
 
-#define CONFIG_STACKSIZE		(32 * 1024)	/* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-# error CONFIG_USE_IRQ not supported
-#endif
-
 #endif