X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmeesc.h;h=6cade14011bcc9f95bdb30917f2c3120f69a096c;hb=69e173eb57d1f4848f070c83456096ba5d2ba1b4;hp=d2ec83cd1f42b14e7b1863d941552ede5fd510e4;hpb=1a4596601fd395f3afb8f82f3f840c5e00bdd57a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index d2ec83c..6cade14 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -3,7 +3,7 @@
  * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
  *
- * (C) Copyright 2009-2011
+ * (C) Copyright 2009-2015
  * Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
  * esd electronic system design gmbh <www.esd.eu>
  *
@@ -27,7 +27,7 @@
  * Since the linker has to swallow that define, we must use a pure
  * hex number here!
  */
-#define CONFIG_SYS_TEXT_BASE		0x20002000
+#define CONFIG_SYS_TEXT_BASE		0x21F00000
 
 /*
  * since a number of boards are not being listed in linux
@@ -40,7 +40,6 @@
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768	/* 32.768 kHz crystal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	16000000/* 16.0 MHz crystal */
-#define CONFIG_SYS_HZ			1000	/* decrementer freq */
 
 /* Misc CPU related */
 #define CONFIG_SKIP_LOWLEVEL_INIT
@@ -57,13 +56,12 @@
 #define CONFIG_DISPLAY_CPUINFO			/* display cpu info and speed */
 #define CONFIG_PREBOOT				/* enable preboot variable */
 
+#define CONFIG_CMD_BOOTZ
+
 /*
  * Hardware drivers
  */
 
-/* required until arch/arm/include/asm/arch-at91/at91sam9263.h is reworked */
-#define ATMEL_PMC_UHP			AT91SAM926x_PMC_UHP
-
 /* general purpose I/O */
 #define CONFIG_AT91_GPIO
 
@@ -87,7 +85,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
 #undef CONFIG_CMD_BDI
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_LOADS
@@ -95,8 +92,10 @@
 
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
+
+#ifdef CONFIG_SYS_USE_NANDFLASH
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_USB
+#endif
 
 /* LED */
 #define CONFIG_AT91_LED
@@ -105,9 +104,12 @@
  * SDRAM: 1 bank, min 32, max 128 MB
  * Initialized before u-boot gets started.
  */
+#define PHYS_SDRAM					ATMEL_BASE_CS1 /* 0x20000000 */
+#define PHYS_SDRAM_SIZE				0x02000000     /* 32 MByte */
+
 #define CONFIG_NR_DRAM_BANKS		1
-#define CONFIG_SYS_SDRAM_BASE		0x20000000 /* ATMEL_BASE_CS1 */
-#define CONFIG_SYS_SDRAM_SIZE		0x02000000
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CONFIG_SYS_SDRAM_SIZE		PHYS_SDRAM_SIZE
 
 #define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE + 0x00100000)
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x01E00000)
@@ -125,7 +127,6 @@
 #ifdef CONFIG_SYS_USE_DATAFLASH
 # define CONFIG_ATMEL_DATAFLASH_SPI
 # define CONFIG_HAS_DATAFLASH
-# define CONFIG_SYS_SPI_WRITE_TOUT		(5 * CONFIG_SYS_HZ)
 # define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
 # define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
 # define AT91_SPI_CLK				15000000
@@ -140,12 +141,12 @@
 #ifdef CONFIG_CMD_NAND
 # define CONFIG_NAND_ATMEL
 # define CONFIG_SYS_MAX_NAND_DEVICE		1
-# define CONFIG_SYS_NAND_BASE			0x40000000 /* ATMEL_BASE_CS3 */
+# define CONFIG_SYS_NAND_BASE			ATMEL_BASE_CS3 /* 0x40000000 */
 # define CONFIG_SYS_NAND_DBW_8
 # define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
 # define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
-# define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIO_PORTD, 15
-# define CONFIG_SYS_NAND_READY_PIN		AT91_PIO_PORTA, 22
+# define CONFIG_SYS_NAND_ENABLE_PIN		GPIO_PIN_PD(15)
+# define CONFIG_SYS_NAND_READY_PIN		GPIO_PIN_PA(22)
 #endif
 
 /* Ethernet */
@@ -155,18 +156,6 @@
 #define CONFIG_NET_RETRY_COUNT			20
 #undef CONFIG_RESET_PHY_R
 
-/* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_DOS_PARTITION
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00a00000
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9263"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-
-/* CAN */
-#define CONFIG_AT91_CAN
-
 /* hw-controller addresses */
 #define CONFIG_ET1100_BASE		0x70000000
 
@@ -190,13 +179,14 @@
 
 #endif
 
-#define CONFIG_SYS_PROMPT		"=> "
 #define CONFIG_SYS_CBSIZE		512
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
 
 /*
  * Size of malloc() pool