X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmecp5200.h;h=5aef5b20c7d7ced2896b1114ce0333d015928e91;hb=14d0a02a168b36e87665b8d7f42fa3e88263d26d;hp=4a93b5888575c7a4111c3c76f3509304ff4f4c5a;hpb=c50a6031670a90f799835db7bc1638a3e2a9f1f0;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index 4a93b58..5aef5b2 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -63,9 +63,6 @@
 #endif
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
-
-#ifdef CONFIG_MPC5200	/* MPC5100 PCI is not supported yet. */
-
 #define CONFIG_MII
 #if 0 /* test-only !!! */
 #define CONFIG_NET_MULTI	1
@@ -74,10 +71,6 @@
 #define CONFIG_NS8382X		1
 #endif
 
-#else	/* MPC5100 */
-
-#endif
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -112,11 +105,11 @@
 #define CONFIG_CMD_ELF
 
 
-#if (TEXT_BASE == 0xFF000000)		/* Boot low with 16 MB Flash */
+#if (CONFIG_SYS_TEXT_BASE == 0xFF000000)		/* Boot low with 16 MB Flash */
 #   define CONFIG_SYS_LOWBOOT		1
 #   define CONFIG_SYS_LOWBOOT16	1
 #endif
-#if (TEXT_BASE == 0xFF800000)		/* Boot low with  8 MB Flash */
+#if (CONFIG_SYS_TEXT_BASE == 0xFF800000)		/* Boot low with  8 MB Flash */
 #   define CONFIG_SYS_LOWBOOT		1
 #   define CONFIG_SYS_LOWBOOT08	1
 #endif
@@ -152,12 +145,10 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_vxworks0"
 
-#if defined(CONFIG_MPC5200)
 /*
  * IPB Bus clocking configuration.
  */
 #undef CONFIG_SYS_IPBSPEED_133			/* define for 133MHz speed */
-#endif
 /*
  * I2C configuration
  */
@@ -230,7 +221,7 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE    TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #   define CONFIG_SYS_RAMBOOT		1
 #endif
@@ -288,13 +279,8 @@
 /*
  * Various low-level settings
  */
-#if defined(CONFIG_MPC5200)
 #define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
 #define CONFIG_SYS_HID0_FINAL		HID0_ICE
-#else
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		0
-#endif
 
 #define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE