X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmecp5123.h;h=b9cf1dc7975a2b260f1d2e84a0db2be4d5678048;hb=0ce8437f3006f86d093f83120c64f657bbac3c31;hp=e194c8f7bbed64eaef0204657262f8740e523233;hpb=054197ba8ee5ef1e41694df58531b6e53ec43f2d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index e194c8f..b9cf1dc 100644
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -48,6 +48,8 @@
 #define CONFIG_E300		1	/* E300 Family */
 #define CONFIG_MPC512X		1	/* MPC512X family */
 
+#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
+
 #define CONFIG_SYS_MPC512X_CLKIN	33333333	/* in Hz */
 
 #define CONFIG_BOARD_EARLY_INIT_F		/* call board_early_init_f() */
@@ -66,6 +68,9 @@
 
 #define CONFIG_SYS_DDR_BASE		0x00000000	/* DDR is sys memory*/
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_MAX_RAM_SIZE		0x20000000
+
+#define CONFIG_SYS_IOCTRL_MUX_DDR	0x00000036
 
 /* DDR Controller Configuration
  *
@@ -177,8 +182,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 #define NAND_MAX_CHIPS                  CONFIG_SYS_MAX_NAND_DEVICE
 
-#define	CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
-
 /*
  * Configuration parameters for MPC5121 NAND driver
  */
@@ -203,13 +206,12 @@
 
 /* Use SRAM for initial stack */
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_SRAM_BASE /* Init RAM addr */
-#define CONFIG_SYS_INIT_RAM_END		CONFIG_SYS_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_SIZE		CONFIG_SYS_SRAM_SIZE
 
-#define CONFIG_SYS_GBL_DATA_SIZE	0x100		/* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE		TEXT_BASE	/* Start of monitor */
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE	/* Start of monitor */
 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Monitor length */
 #define CONFIG_SYS_MALLOC_LEN		(6 * 1024 * 1024) /* Malloc size */
 
@@ -217,7 +219,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX     1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 
 /*
  * Serial console configuration
@@ -343,10 +344,10 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Linux initial memory map */
+#define CONFIG_SYS_BOOTMAPSZ	(256 << 20)	/* Linux initial memory map */
 
 /* Cache Configuration */
 #define CONFIG_SYS_DCACHE_SIZE		32768
@@ -361,14 +362,6 @@
 
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
-
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */