X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmecp5123.h;h=1a9cb675dfba370f5a2bff45d9a30f427b746670;hb=8850c5d57c10aa6431d138d426e6e105c99cc7ba;hp=0b9cbae5bad2da3ea27dc782bd046798db687676;hpb=0cf876154922118d8fb1b4c30f527c95a113bef3;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index 0b9cbae..1a9cb67 100644
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -15,8 +15,6 @@
 #define __CONFIG_H
 
 #define CONFIG_MECP5123 1
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_SYS_GENERIC_BOARD
 
 /*
  * Memory map for the MECP5123 board:
@@ -37,7 +35,6 @@
 
 #define CONFIG_SYS_MPC512X_CLKIN	33333333	/* in Hz */
 
-#define CONFIG_BOARD_EARLY_INIT_F		/* call board_early_init_f() */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_SYS_IMMR		        0x80000000
@@ -218,7 +215,6 @@
 #if CONFIG_PSC_CONSOLE != 3
 #error CONFIG_PSC_CONSOLE must be 3
 #endif
-#define CONFIG_BAUDRATE		9600	/* ... at 9600 bps */
 #define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 
@@ -243,12 +239,7 @@
 #define SCCR2_CLOCKS_EN	(CLOCK_SCCR2_MEM_EN |	\
 			 CLOCK_SCCR2_I2C_EN)
 
-
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#ifdef  CONFIG_SYS_HUSH_PARSER
-#endif
 
 /* I2C */
 #define CONFIG_HARD_I2C			/* I2C with hardware support */
@@ -296,24 +287,11 @@
 #define CONFIG_LOADS_ECHO		/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change	*/
 
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_DATE
 #undef CONFIG_CMD_FUSE
 #undef CONFIG_CMD_IDE
-#undef CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_ELF
-#define CONFIG_DOS_PARTITION
 
 /*
  * Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock.
@@ -379,7 +357,6 @@
 
 #define CONFIG_LOADADDR		400000	/* def. location for tftp and bootm */
 
-#define CONFIG_BOOTDELAY	5	/* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS			/* the boot command will set bootargs*/
 
 #define CONFIG_PREBOOT	"echo;"	\
@@ -432,9 +409,6 @@
 
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-
 #define OF_CPU			"PowerPC,5121@0"
 #define OF_SOC_COMPAT		"fsl,mpc5121-immr"
 #define OF_TBCLK		(bd->bi_busfreq / 4)