X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fmaxbcm.h;h=9cc13052cc75f5dcc43f70de8c042eaa15675d0e;hb=b9da77f1958aab4ec50ff2f095b40464ca2489dd;hp=3bed9c7ca403d7fce054201c9a3ada3a4acf8aa5;hpb=42cc034f19d30a3e0f1a63788347e039315806a0;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h
index 3bed9c7..9cc1305 100644
--- a/include/configs/maxbcm.h
+++ b/include/configs/maxbcm.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef _CONFIG_DB_MV7846MP_GP_H
@@ -10,33 +9,17 @@
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_ARMADA_XP		/* SOC Family Name */
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-#endif
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DISPLAY_BOARDINFO_LATE
 
 /*
  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  * for DDR ECC byte filling in the SPL before loading the main
  * U-Boot into it.
  */
-#define	CONFIG_SYS_TEXT_BASE	0x00800000
 #define CONFIG_SYS_TCLK		250000000	/* 250MHz */
 
 /*
  * Commands configuration
  */
-#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_TFTPPUT
-#define CONFIG_CMD_TIME
 
 /* I2C */
 #define CONFIG_SYS_I2C
@@ -46,25 +29,10 @@
 #define CONFIG_SYS_I2C_SPEED		100000
 
 /* SPI NOR flash default params, used by sf commands */
-#define CONFIG_SF_DEFAULT_SPEED		1000000
-#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SPI_FLASH_SPANSION
 
 /* Environment in SPI NOR flash */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_OFFSET		(1 << 20) /* 1MiB in */
-#define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
-#define CONFIG_ENV_SECT_SIZE		(64 << 10) /* 64KiB sectors */
-
-#define CONFIG_PHY_MARVELL		/* there is a marvell phy */
-#define CONFIG_PHY_ADDR			{ 0x0, 0x1, 0x2, 0x3 }
-#define CONFIG_SYS_NETA_INTERFACE_TYPE	PHY_INTERFACE_MODE_SGMII
-#define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
-#define CONFIG_RESET_PHY_R
 
-#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup */
-#define CONFIG_SYS_ALT_MEMTEST
+#define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
 
 /*
  * mv-common.h should be defined after CMD configs since it used them
@@ -87,35 +55,22 @@
 
 /* SPL */
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE		0x40004030
 #define CONFIG_SPL_MAX_SIZE		((128 << 10) - 0x4030)
 
 #define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + (128 << 10))
 #define CONFIG_SPL_BSS_MAX_SIZE		(16 << 10)
 
-#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
-					 CONFIG_SPL_BSS_MAX_SIZE)
-#define CONFIG_SYS_SPL_MALLOC_SIZE	(16 << 10)
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MALLOC_SIMPLE
+#endif
 
 #define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-
 /* SPL related SPI defines */
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
-#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SPL_SPI_BUS		0
-#define CONFIG_SPL_SPI_CS		0
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
 
 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
-#define CONFIG_SYS_MVEBU_DDR_AXP
 #define CONFIG_DDR_FIXED_SIZE		(1 << 20)	/* 1GiB */
+#define CONFIG_BOARD_ECC_SUPPORT	/* this board supports ECC */
 
 #endif /* _CONFIG_DB_MV7846MP_GP_H */