X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fm53menlo.h;h=124aab0eff08ecef84c029d4a6f0f0f5cacac0e2;hb=3847ba94f0207cca171d728aca1637b16e1210a9;hp=a432259cfe377086ad8d7e04f76deb46ee065380;hpb=898c40c0d6f9e53dafcfdf6f870190faef6e088b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h
index a432259..124aab0 100644
--- a/include/configs/m53menlo.h
+++ b/include/configs/m53menlo.h
@@ -11,7 +11,6 @@
 
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_REVISION_TAG
 #define CONFIG_SYS_FSL_CLK
 
 #define CONFIG_TIMESTAMP		/* Print image info with timestamp */
@@ -24,9 +23,6 @@
 #define PHYS_SDRAM_2			CSD1_BASE_ADDR
 #define PHYS_SDRAM_2_SIZE		(gd->bd->bi_dram[1].size)
 #define PHYS_SDRAM_SIZE			(gd->ram_size)
-#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
-#define CONFIG_SYS_MEMTEST_START	0x70000000
-#define CONFIG_SYS_MEMTEST_END		0x8ff00000
 
 #define CONFIG_SYS_SDRAM_BASE		(PHYS_SDRAM_1)
 #define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR)
@@ -48,7 +44,6 @@
 /*
  * Serial Driver
  */
-#define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_BASE
 
 /*
@@ -62,7 +57,6 @@
 /*
  * NAND
  */
-#define CONFIG_ENV_SIZE			(16 * 1024)
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR_AXI
@@ -70,41 +64,23 @@
 #define CONFIG_MXC_NAND_IP_REGS_BASE	NFC_BASE_ADDR
 #define CONFIG_SYS_NAND_LARGEPAGE
 #define CONFIG_MXC_NAND_HWECC
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
 
 /* Environment is in NAND */
-#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
-#define CONFIG_ENV_SECT_SIZE		(128 * 1024)
-#define CONFIG_ENV_RANGE		(4 * CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_OFFSET		(8 * CONFIG_ENV_SECT_SIZE) /* 1 MiB */
-#define CONFIG_ENV_OFFSET_REDUND	\
-		(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
+#define CONFIG_ENV_RANGE		(0x00080000) /* 512 KiB */
 #endif
 
 /*
  * Ethernet on SOC (FEC)
  */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_FEC_MXC
 #define IMX_FEC_BASE			FEC_BASE_ADDR
 #define CONFIG_FEC_MXC_PHYADDR		0x0
-#define CONFIG_MII
 #define CONFIG_DISCOVER_PHY
 #define CONFIG_FEC_XCV_TYPE		RMII
 #define CONFIG_ETHPRIME			"FEC0"
 #endif
 
-/*
- * I2C
- */
-#ifdef CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_RTC_BUS_NUM		1 /* I2C2 */
-#endif
 
 /*
  * RTC
@@ -136,37 +112,22 @@
 /*
  * LCD
  */
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_VIDEO_BMP_GZIP
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASHIMAGE_GUARD
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(2 << 20)
 
 /* LVDS display */
 #define CONFIG_SYS_LDB_CLOCK			33260000
 #define CONFIG_IMX_VIDEO_SKIP
-#define CONFIG_SPLASH_SOURCE
 
 /* IIM Fuses */
 #define CONFIG_FSL_IIM
 
 /* Watchdog */
-#define CONFIG_WATCHDOG_TIMEOUT_MSECS 8000
 
 /*
  * Boot Linux
  */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_BOOTFILE		"boot/fitImage"
-#define CONFIG_LOADADDR		0x70800000
-#define CONFIG_BOOTCOMMAND	"run mmc_mmc"
-#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
 /*
  * NAND SPL
@@ -175,12 +136,7 @@
 #define CONFIG_SPL_PAD_TO		0x8000
 #define CONFIG_SPL_STACK		0x70004000
 
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_SIZE		(256 * 1024 * 1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
 
 /*
  * Extra Environments
@@ -202,6 +158,13 @@
 	"splashfile=boot/usplash.bmp.gz\0"				\
 	"splashimage=0x88000000\0"					\
 	"splashpos=m,m\0"						\
+	"altbootcmd="							\
+		"if test ${mmcpart} -eq 1 ; then "			\
+			"setenv mmcpart 2 ; "				\
+		"else "							\
+			"setenv mmcpart 1 ; "				\
+		"fi ; "							\
+		"boot\0"						\
 	"stdout=serial,vidconsole\0"					\
 	"stderr=serial,vidconsole\0"					\
 	"addcons="							\
@@ -216,14 +179,14 @@
 		"setenv bootargs ${bootargs} ${miscargs}\0"		\
 	"addargs=run addcons addmisc addmtd\0"				\
 	"mmcload="							\
-		"mmc rescan ; load mmc ${mmcdev}:${mmcpart} "		\
-		"${kernel_addr_r} ${bootfile}\0"			\
+		"mmc rescan || reset ; load mmc ${mmcdev}:${mmcpart} "	\
+		"${kernel_addr_r} ${bootfile} || reset\0"		\
 	"miscargs=nohlt panic=1\0"					\
 	"mmcargs=setenv bootargs root=/dev/mmcblk0p${mmcpart} rw "	\
 		"rootwait\0"						\
 	"mmc_mmc="							\
-		"run mmcload mmcargs addargs ; "			\
-		"bootm ${kernel_addr_r}\0"				\
+		"run mmcload mmcargs addargs || reset ; "		\
+		"bootm ${kernel_addr_r} ; reset\0"			\
 	"netload=tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"	\
 	"net_nfs="							\
 		"run netload nfsargs addip addargs ; "			\
@@ -241,9 +204,4 @@
 		"fi ; "							\
 		"fi\0"
 
-#if defined(CONFIG_SPL_BUILD)
-#undef CONFIG_WATCHDOG
-#define CONFIG_HW_WATCHDOG
-#endif
-
 #endif	/* __M53MENLO_CONFIG_H__ */