X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fm28evk.h;h=25884b41466dee1b64bbe2044189f0ff833b08a9;hb=529fb062081e100faae6dc0d163a548b8528ff24;hp=fccd29dc26ce8fba8d81dc410168be090a1d6e48;hpb=b1cdd8baa14f518288ceddb391d6587c1ecb3174;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index fccd29d..25884b4 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -12,43 +12,18 @@
 #define MACH_TYPE_M28EVK	3613
 #define CONFIG_MACH_TYPE	MACH_TYPE_M28EVK
 
-#define CONFIG_FIT
-
 #define CONFIG_TIMESTAMP		/* Print image info with timestamp */
 
 /* U-Boot Commands */
 #define CONFIG_SYS_NO_FLASH
-#include <config_cmd_default.h>
-#define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DOS_PARTITION
 #define CONFIG_FAT_WRITE
 
-#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_BMP
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_GREPENV
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SETEXPR
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_USB
-#define	CONFIG_VIDEO
-
-#define CONFIG_REGEX			/* Enable regular expression support */
 
 /* Memory configuration */
 #define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
@@ -69,7 +44,6 @@
 #define CONFIG_ENV_OFFSET_REDUND	\
 		(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 
-#define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_RBTREE
@@ -96,7 +70,6 @@
 
 /* EEPROM */
 #ifdef CONFIG_CMD_EEPROM
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
 #endif
 
@@ -118,7 +91,6 @@
 #define CONFIG_EHCI_MXS_PORT0
 #define CONFIG_EHCI_MXS_PORT1
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
-#define CONFIG_USB_STORAGE
 #endif
 
 /* SPI */
@@ -129,8 +101,6 @@
 
 /* SPI FLASH */
 #ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_SF_DEFAULT_BUS		2
 #define CONFIG_SF_DEFAULT_CS		0
 #define CONFIG_SF_DEFAULT_SPEED		40000000
@@ -156,7 +126,6 @@
 #endif
 
 /* Booting Linux */
-#define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTFILE		"fitImage"
 #define CONFIG_BOOTARGS		"console=ttyAMA0,115200n8 "
 #define CONFIG_BOOTCOMMAND	"run mmc_mmc"
@@ -170,6 +139,7 @@
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"consdev=ttyAMA0\0"						\
 	"baudrate=115200\0"						\
+	"bootscript=boot.scr\0"						\
 	"bootdev=/dev/mmcblk0p2\0"					\
 	"rootdev=/dev/mmcblk0p3\0"					\
 	"netdev=eth0\0"							\
@@ -236,7 +206,7 @@
 	"addargs=run addcons addmtd addmisc\0"				\
 	"mmcload="							\
 		"mmc rescan ; "						\
-		"ext4load mmc 0:2 ${kernel_addr_r} ${bootfile}\0"	\
+		"load mmc 0:2 ${kernel_addr_r} ${bootfile}\0"		\
 	"ubiload="							\
 		"ubi part UBI ; ubifsmount ubi0:rootfs ; "		\
 		"ubifsload ${kernel_addr_r} /boot/${bootfile}\0"	\
@@ -279,10 +249,12 @@
 		"bootm ${kernel_addr_r}\0"				\
 	"try_bootscript="						\
 		"mmc rescan;"						\
-		"if ext4load mmc 0:2 ${kernel_addr_r} ${bootscript};"	\
-		"then;"							\
-			"\techo Running bootscript...;"			\
-			"\tsource ${kernel_addr_r};"			\
+		"if test -e mmc 0:2 ${bootscript} ; then "		\
+		"if load mmc 0:2 ${kernel_addr_r} ${bootscript};"	\
+		"then ; "						\
+			"echo Running bootscript... ; "			\
+			"source ${kernel_addr_r} ; "			\
+		"fi ; "							\
 		"fi\0"
 
 /* The rest of the configuration is shared */