X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Flx2162aqds.h;h=54d7cea4c599dbb65a76e9195bac660e2ca37943;hb=dd11fdc31fb82f63258c1970a6d8d22b8ffd3173;hp=847534c5505c64ec0d2484ea01105c93853c7456;hpb=b11f634b1c1be6ab419758c6596c673445e5ac70;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/lx2162aqds.h b/include/configs/lx2162aqds.h
index 847534c..54d7cea 100644
--- a/include/configs/lx2162aqds.h
+++ b/include/configs/lx2162aqds.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2020 NXP
+ * Copyright 2020-2021 NXP
  */
 
 #ifndef __LX2162_QDS_H
@@ -9,45 +9,12 @@
 #include "lx2160a_common.h"
 
 /* USB */
-#undef CONFIG_USB_MAX_CONTROLLER_COUNT
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-
-/* Voltage monitor on channel 2*/
-#define CONFIG_VID_FLS_ENV		"lx2162aqds_vdd_mv"
-#define CONFIG_VID
-#define CONFIG_VOL_MONITOR_LTC3882_SET
-#define CONFIG_VOL_MONITOR_LTC3882_READ
 
 /* RTC */
-#define CONFIG_SYS_RTC_BUS_NUM		0
-
-/*
- * MMC
- */
-#ifdef CONFIG_MMC
-#ifndef __ASSEMBLY__
-u8 qixis_esdhc_detect_quirk(void);
-#endif
-#define CONFIG_ESDHC_DETECT_QUIRK  qixis_esdhc_detect_quirk()
-#endif
-
-/* MAC/PHY configuration */
-#if defined(CONFIG_FSL_MC_ENET)
-#define CONFIG_MII
-#define CONFIG_ETHPRIME		"DPMAC17@rgmii-id"
-#endif
-
-/* EEPROM */
-#define CONFIG_ID_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM		0
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x57
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+#define CFG_SYS_RTC_BUS_NUM		0
 
 /* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS		\
+#define CFG_EXTRA_ENV_SETTINGS		\
 	EXTRA_ENV_SETTINGS			\
 	"boot_scripts=lx2162aqds_boot.scr\0"	\
 	"boot_script_hdr=hdr_lx2162aqds_bs.out\0"	\
@@ -65,7 +32,7 @@ u8 qixis_esdhc_detect_quirk(void);
 		"$kernelhdr_addr_sd $kernelhdr_size_sd "	\
 		" && esbc_validate ${kernelheader_addr_r};"	\
 		"bootm $load_addr#$BOARD\0"			\
-	"emmc_bootcmd=echo Trying load from emmc card..;"	\
+	"sd2_bootcmd=echo Trying load from emmc card..;"	\
 		"mmc dev 1; mmcinfo; mmc read $load_addr "	\
 		"$kernel_addr_sd $kernel_size_sd ;"		\
 		"env exists secureboot && mmc read $kernelheader_addr_r "\