X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Flx2160ardb.h;h=6404b359111f7dfa2f86e59c723f9db7c23c9e10;hb=HEAD;hp=a51987e6b09d837ac82994ea6a62a8cb1f1e07f4;hpb=e5f1111a7919ee4d0596fec313f844bfad6db0ec;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/lx2160ardb.h b/include/configs/lx2160ardb.h
index a51987e..6404b35 100644
--- a/include/configs/lx2160ardb.h
+++ b/include/configs/lx2160ardb.h
@@ -8,69 +8,12 @@
 
 #include "lx2160a_common.h"
 
-/* Qixis */
-#define QIXIS_XMAP_MASK			0x07
-#define QIXIS_XMAP_SHIFT		5
-#define QIXIS_RST_CTL_RESET_EN		0x30
-#define QIXIS_LBMAP_DFLTBANK		0x00
-#define QIXIS_LBMAP_ALTBANK		0x20
-#define QIXIS_LBMAP_QSPI		0x00
-#define QIXIS_RCW_SRC_QSPI		0xff
-#define QIXIS_RST_CTL_RESET		0x31
-#define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
-#define QIXIS_RCFG_CTL_RECONFIG_START	0x21
-#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
-#define QIXIS_LBMAP_MASK		0x0f
-#define QIXIS_LBMAP_SD
-#define QIXIS_LBMAP_EMMC
-#define QIXIS_RCW_SRC_SD           0x08
-#define QIXIS_RCW_SRC_EMMC         0x09
-#define NON_EXTENDED_DUTCFG
-
-/* VID */
-
-#define I2C_MUX_CH_VOL_MONITOR		0xA
-/* Voltage monitor on channel 2*/
-#define I2C_VOL_MONITOR_ADDR		0x63
-#define I2C_VOL_MONITOR_BUS_V_OFFSET	0x2
-#define I2C_VOL_MONITOR_BUS_V_OVF	0x1
-#define I2C_VOL_MONITOR_BUS_V_SHIFT	3
-#define CONFIG_VID_FLS_ENV		"lx2160ardb_vdd_mv"
-#define CONFIG_VID
-
-/* The lowest and highest voltage allowed*/
-#define VDD_MV_MIN			775
-#define VDD_MV_MAX			855
-
-/* PM Bus commands code for LTC3882*/
-#define PMBUS_CMD_PAGE                  0x0
-#define PMBUS_CMD_READ_VOUT             0x8B
-#define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
-#define PMBUS_CMD_VOUT_COMMAND          0x21
-#define PWM_CHANNEL0                    0x0
-
-#define CONFIG_VOL_MONITOR_LTC3882_SET
-#define CONFIG_VOL_MONITOR_LTC3882_READ
-
 /* RTC */
-#define CONFIG_SYS_RTC_BUS_NUM		4
+#define CFG_SYS_RTC_BUS_NUM		4
 
-/* MAC/PHY configuration */
 #if defined(CONFIG_FSL_MC_ENET)
-#define CONFIG_MII
-#define CONFIG_ETHPRIME		"DPMAC1@xgmii"
-
-#define AQR107_PHY_ADDR1	0x04
-#define AQR107_PHY_ADDR2	0x05
-#define AQR107_IRQ_MASK		0x0C
-
-#define CORTINA_NO_FW_UPLOAD
-#define CORTINA_PHY_ADDR1	0x0
-#define INPHI_PHY_ADDR1		0x0
-
-#define RGMII_PHY_ADDR1		0x01
-#define RGMII_PHY_ADDR2		0x02
-
+#define AQR113C_PHY_ADDR1		0x0
+#define AQR113C_PHY_ADDR2		0x08
 #endif
 
 /* EMC2305 */
@@ -79,17 +22,8 @@
 #define I2C_EMC2305_CMD		0x40
 #define I2C_EMC2305_PWM		0x80
 
-/* EEPROM */
-#define CONFIG_ID_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM	           0
-#define CONFIG_SYS_I2C_EEPROM_ADDR	           0x57
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	    1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
-
 /* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS		\
+#define CFG_EXTRA_ENV_SETTINGS		\
 	EXTRA_ENV_SETTINGS			\
 	"boot_scripts=lx2160ardb_boot.scr\0"	\
 	"boot_script_hdr=hdr_lx2160ardb_bs.out\0"	\