X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Flx2160aqds.h;h=30b044bd00721406834fe19895fb7cfa3067ec04;hb=166a77b34b30f64f7b12a3016b0bba49d568c52e;hp=1cc015c1c77c06bb2d226707fd94b465c896047b;hpb=d44d46e9fafaae85b0ebbcdc53999537a199fa2f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/lx2160aqds.h b/include/configs/lx2160aqds.h
index 1cc015c..30b044b 100644
--- a/include/configs/lx2160aqds.h
+++ b/include/configs/lx2160aqds.h
@@ -8,70 +8,14 @@
 
 #include "lx2160a_common.h"
 
-/* Qixis */
-#define QIXIS_XMAP_MASK			0x07
-#define QIXIS_XMAP_SHIFT		5
-#define QIXIS_RST_CTL_RESET_EN		0x30
-#define QIXIS_LBMAP_DFLTBANK		0x00
-#define QIXIS_LBMAP_ALTBANK		0x20
-#define QIXIS_LBMAP_QSPI		0x00
-#define QIXIS_RCW_SRC_QSPI		0xff
-#define QIXIS_RST_CTL_RESET		0x31
-#define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
-#define QIXIS_RCFG_CTL_RECONFIG_START	0x21
-#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
-#define QIXIS_LBMAP_MASK		0x0f
-#define QIXIS_LBMAP_SD
-#define QIXIS_LBMAP_EMMC
-#define QIXIS_RCW_SRC_SD		0x08
-#define QIXIS_RCW_SRC_EMMC         0x09
-#define NON_EXTENDED_DUTCFG
-#define QIXIS_SDID_MASK			0x07
-#define QIXIS_ESDHC_NO_ADAPTER		0x7
-
-/* SYSCLK */
-#define QIXIS_SYSCLK_100		0x0
-#define QIXIS_SYSCLK_125		0x1
-#define QIXIS_SYSCLK_133		0x2
-
-/* DDRCLK */
-#define QIXIS_DDRCLK_100		0x0
-#define QIXIS_DDRCLK_125		0x1
-#define QIXIS_DDRCLK_133		0x2
-
-#define BRDCFG4_EMI1SEL_MASK		0xF8
-#define BRDCFG4_EMI1SEL_SHIFT		3
-#define BRDCFG4_EMI2SEL_MASK		0x07
-#define BRDCFG4_EMI2SEL_SHIFT		0
-
 /* VID */
-
-#define I2C_MUX_CH_VOL_MONITOR		0xA
-/* Voltage monitor on channel 2*/
-#define I2C_VOL_MONITOR_ADDR		0x63
-#define I2C_VOL_MONITOR_BUS_V_OFFSET	0x2
-#define I2C_VOL_MONITOR_BUS_V_OVF	0x1
-#define I2C_VOL_MONITOR_BUS_V_SHIFT	3
 #define CONFIG_VID_FLS_ENV		"lx2160aqds_vdd_mv"
 #define CONFIG_VID
-
-/* The lowest and highest voltage allowed*/
-#define VDD_MV_MIN			775
-#define VDD_MV_MAX			925
-
-/* PM Bus commands code for LTC3882*/
-#define PMBUS_CMD_PAGE                  0x0
-#define PMBUS_CMD_READ_VOUT             0x8B
-#define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
-#define PMBUS_CMD_VOUT_COMMAND          0x21
-#define PWM_CHANNEL0                    0x0
-
 #define CONFIG_VOL_MONITOR_LTC3882_SET
 #define CONFIG_VOL_MONITOR_LTC3882_READ
 
 /* RTC */
 #define CONFIG_SYS_RTC_BUS_NUM		0
-#define I2C_MUX_CH_RTC			0xB
 
 /*
  * MMC
@@ -87,36 +31,11 @@ u8 qixis_esdhc_detect_quirk(void);
 #if defined(CONFIG_FSL_MC_ENET)
 #define CONFIG_MII
 #define CONFIG_ETHPRIME		"DPMAC17@rgmii-id"
-
-#define AQ_PHY_ADDR1		0x00
-#define AQ_PHY_ADDR2		0x01
-#define AQ_PHY_ADDR3		0x02
-#define AQ_PHY_ADDR4		0x03
-
-#define CORTINA_NO_FW_UPLOAD
-#define CORTINA_PHY_ADDR1	0x0
-
-#define INPHI_PHY_ADDR1		0x0
-#define INPHI_PHY_ADDR2		0x1
-
-#define RGMII_PHY_ADDR1		0x01
-#define RGMII_PHY_ADDR2		0x02
-
-#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
-#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
-#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
-#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
-
 #endif
 
 /* EEPROM */
-#define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
 #define CONFIG_SYS_EEPROM_BUS_NUM		0
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x57
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
 
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\