X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Flx2160a_common.h;h=4bd0ddbdad20be8057ca2de5076e951b5929ddee;hb=5a1a8a63be8f7262a300eddafb18020926b12fb6;hp=cd3e2c4c8546c4125581c312d0fa371dc2e0ff2d;hpb=deb287b561233a1a9718ec87360dfa2079144e60;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index cd3e2c4..4bd0ddb 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Copyright 2018-2019 NXP + * Copyright 2018-2020 NXP */ #ifndef __LX2_COMMON_H @@ -20,7 +20,6 @@ #define CONFIG_SYS_FLASH_BASE 0x20000000 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_BOARD_EARLY_INIT_F 1 /* DDR */ #define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */ @@ -53,7 +52,7 @@ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) /* SMP Definitinos */ -#define CPU_RELEASE_ADDR secondary_boot_func +#define CPU_RELEASE_ADDR secondary_boot_addr /* Generic Timer Definitions */ /* @@ -78,7 +77,6 @@ (void *)CONFIG_SYS_SERIAL1, \ (void *)CONFIG_SYS_SERIAL2, \ (void *)CONFIG_SYS_SERIAL3 } -#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* MC firmware */ @@ -151,8 +149,10 @@ /* USB */ #ifdef CONFIG_USB #define CONFIG_HAS_FSL_XHCI_USB +#ifndef CONFIG_TARGET_LX2162AQDS #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #endif +#endif /* FlexSPI */ #ifdef CONFIG_NXP_FSPI @@ -172,11 +172,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 -#define CONFIG_SYS_MMC_ENV_DEV 0 - -/* Allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ @@ -187,20 +182,34 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ /* Initial environment variables */ -#define XSPI_MC_INIT_CMD \ - "env exists secureboot && " \ - "esbc_validate 0x20700000 && " \ - "esbc_validate 0x20740000 ;" \ - "fsl_mc start mc 0x20a00000 0x20e00000\0" +#define XSPI_MC_INIT_CMD \ + "sf probe 0:0 && " \ + "sf read 0x80640000 0x640000 0x80000 && " \ + "env exists secureboot && " \ + "esbc_validate 0x80640000 && " \ + "esbc_validate 0x80680000; " \ + "sf read 0x80a00000 0xa00000 0x300000 && " \ + "sf read 0x80e00000 0xe00000 0x100000; " \ + "fsl_mc start mc 0x80a00000 0x80e00000\0" #define SD_MC_INIT_CMD \ "mmc read 0x80a00000 0x5000 0x1200;" \ "mmc read 0x80e00000 0x7000 0x800;" \ "env exists secureboot && " \ - "mmc read 0x80700000 0x3800 0x20 && " \ - "mmc read 0x80740000 0x3A00 0x20 && " \ - "esbc_validate 0x80700000 && " \ - "esbc_validate 0x80740000 ;" \ + "mmc read 0x80640000 0x3200 0x20 && " \ + "mmc read 0x80680000 0x3400 0x20 && " \ + "esbc_validate 0x80640000 && " \ + "esbc_validate 0x80680000 ;" \ + "fsl_mc start mc 0x80a00000 0x80e00000\0" + +#define SD2_MC_INIT_CMD \ + "mmc dev 1; mmc read 0x80a00000 0x5000 0x1200;" \ + "mmc read 0x80e00000 0x7000 0x800;" \ + "env exists secureboot && " \ + "mmc read 0x80640000 0x3200 0x20 && " \ + "mmc read 0x80680000 0x3400 0x20 && " \ + "esbc_validate 0x80640000 && " \ + "esbc_validate 0x80680000 ;" \ "fsl_mc start mc 0x80a00000 0x80e00000\0" #define EXTRA_ENV_SETTINGS \ @@ -211,7 +220,7 @@ unsigned long get_board_ddr_clk(void); "initrd_high=0xffffffffffffffff\0" \ "fdt_addr=0x64f00000\0" \ "kernel_start=0x1000000\0" \ - "kernelheader_start=0x7C0000\0" \ + "kernelheader_start=0x600000\0" \ "scriptaddr=0x80000000\0" \ "scripthdraddr=0x80080000\0" \ "fdtheader_addr_r=0x80100000\0" \ @@ -222,15 +231,13 @@ unsigned long get_board_ddr_clk(void); "load_addr=0xa0000000\0" \ "kernel_size=0x2800000\0" \ "kernel_addr_sd=0x8000\0" \ - "kernelhdr_addr_sd=0x3E00\0" \ - "kernel_size_sd=0x1d000\0" \ + "kernelhdr_addr_sd=0x3000\0" \ + "kernel_size_sd=0x14000\0" \ "kernelhdr_size_sd=0x20\0" \ "console=ttyAMA0,38400n8\0" \ BOOTENV \ "mcmemsize=0x70000000\0" \ XSPI_MC_INIT_CMD \ - "boot_scripts=lx2160ardb_boot.scr\0" \ - "boot_script_hdr=hdr_lx2160ardb_bs.out\0" \ "scan_dev_for_boot_part=" \ "part list ${devtype} ${devnum} devplist; " \ "env exists devplist || setenv devplist 1; " \ @@ -251,10 +258,13 @@ unsigned long get_board_ddr_clk(void); "source ${scriptaddr}\0" #define XSPI_NOR_BOOTCOMMAND \ - "env exists mcinitcmd && env exists secureboot "\ - "&& esbc_validate 0x20780000; " \ + "sf probe 0:0; " \ + "sf read 0x806c0000 0x6c0000 0x40000; " \ + "env exists mcinitcmd && env exists secureboot" \ + " && esbc_validate 0x806c0000; " \ + "sf read 0x80d00000 0xd00000 0x100000; " \ "env exists mcinitcmd && " \ - "fsl_mc lazyapply dpl 0x20d00000; " \ + "fsl_mc lazyapply dpl 0x80d00000; " \ "run distro_bootcmd;run xspi_bootcmd; " \ "env exists secureboot && esbc_halt;" @@ -262,16 +272,28 @@ unsigned long get_board_ddr_clk(void); "env exists mcinitcmd && mmcinfo; " \ "mmc read 0x80d00000 0x6800 0x800; " \ "env exists mcinitcmd && env exists secureboot " \ - " && mmc read 0x80780000 0x3C00 0x20 " \ - "&& esbc_validate 0x80780000;env exists mcinitcmd " \ + " && mmc read 0x806C0000 0x3600 0x20 " \ + "&& esbc_validate 0x806C0000;env exists mcinitcmd " \ "&& fsl_mc lazyapply dpl 0x80d00000;" \ "run distro_bootcmd;run sd_bootcmd;" \ "env exists secureboot && esbc_halt;" +#define SD2_BOOTCOMMAND \ + "mmc dev 1; env exists mcinitcmd && mmcinfo; " \ + "mmc read 0x80d00000 0x6800 0x800; " \ + "env exists mcinitcmd && env exists secureboot " \ + " && mmc read 0x806C0000 0x3600 0x20 " \ + "&& esbc_validate 0x806C0000;env exists mcinitcmd " \ + "&& fsl_mc lazyapply dpl 0x80d00000;" \ + "run distro_bootcmd;run sd2_bootcmd;" \ + "env exists secureboot && esbc_halt;" + #define BOOT_TARGET_DEVICES(func) \ func(USB, usb, 0) \ func(MMC, mmc, 0) \ - func(SCSI, scsi, 0) + func(MMC, mmc, 1) \ + func(SCSI, scsi, 0) \ + func(DHCP, dhcp, na) #include #endif /* __LX2_COMMON_H */