X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Flwmon5.h;h=d41ae699fbe6c00617e9f896ef7f980bfba26d1d;hb=645176d1d5c37c91ddb06c366678fbe302550387;hp=66d9710d3362c20b2b57bca332bbbc26d956ac14;hpb=2431492aef1de33bd222c97ecc131a338d9c454e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 66d9710..d41ae69 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -23,7 +23,6 @@
 #define CONFIG_440EPX		1		/* Specific PPC440EPx	*/
 #define CONFIG_440		1		/* ... PPC440 family	*/
 
-
 #define CONFIG_SYS_TEXT_BASE	0xFFF80000
 #define CONFIG_HOSTNAME		lwmon5
 
@@ -102,7 +101,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	2	/* Use UART1			*/
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
@@ -301,16 +299,9 @@
 					 CONFIG_SYS_I2C_DSPIC_KEYB_ADDR,\
 					 CONFIG_SYS_I2C_DSPIC_IO_ADDR }
 
-/*
- * Pass open firmware flat tree
- */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
 /* Update size in "reg" property of NOR FLASH device tree nodes */
 #define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
 
-#define CONFIG_FIT			/* enable FIT image support	*/
-
 #define	CONFIG_POST_KEY_MAGIC	"3C+3E"	/* press F3 + F5 keys to force POST */
 
 #define	CONFIG_PREBOOT		"setenv bootdelay 15"
@@ -349,7 +340,6 @@
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
@@ -391,7 +381,6 @@
 #define CONFIG_EHCI_MMIO_BIG_ENDIAN
 #define CONFIG_EHCI_DESC_BIG_ENDIAN
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */
-#define CONFIG_USB_STORAGE
 
 /* Partitions */
 #define CONFIG_MAC_PARTITION
@@ -409,16 +398,10 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_DIAG
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SDRAM
 
@@ -427,7 +410,6 @@
 #endif
 
 #ifdef CONFIG_440EPX
-#define CONFIG_CMD_USB
 #endif
 
 /*
@@ -437,8 +419,6 @@
 
 #define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
 
-#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE	        1024	/* Console I/O Buffer Size	*/
 #else
@@ -455,7 +435,6 @@
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CONFIG_LOOPW            1       /* enable loopw command         */
 #define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */