X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Flsxl.h;h=7ec82cd4bbda4627e68b17858368b250ecfa7c11;hb=0ff27d4a94637d4b1937c625d33212375bd118d9;hp=bf5c1a1298285ce47dfc6a34c9a5745a31b68e41;hpb=0a64bc20f7f160904d3795536ec70446ad743826;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h
index bf5c1a1..7ec82cd 100644
--- a/include/configs/lsxl.h
+++ b/include/configs/lsxl.h
@@ -12,12 +12,10 @@
  * Version number information
  */
 #if defined(CONFIG_LSCHLV2)
-#define CONFIG_IDENT_STRING " LS-CHLv2"
 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
 #define CONFIG_MACH_TYPE 3006
 #define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
 #elif defined(CONFIG_LSXHL)
-#define CONFIG_IDENT_STRING " LS-XHL"
 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
 #define CONFIG_MACH_TYPE 2663
 /* CONFIG_SYS_TCLK is 200000000 by default */
@@ -35,15 +33,9 @@
 #define CONFIG_MISC_INIT_R
 #define CONFIG_SHOW_BOOT_PROGRESS
 
-#define CONFIG_RANDOM_MACADDR
-#define CONFIG_LIB_RAND
 #define CONFIG_KIRKWOOD_GPIO
-#define CONFIG_OF_LIBFDT
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
 
 /*
  * Enable u-boot API for standalone programs.
@@ -53,22 +45,8 @@
 /*
  * Commands configuration
  */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_ENV
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_IDE
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_FS_GENERIC
-
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
 
 /*
  * mv-common.h should be defined after CMD configs since it used them
@@ -76,18 +54,15 @@
  */
 #include "mv-common.h"
 
+/* loading initramfs images without uimage header */
+#define CONFIG_SUPPORT_RAW_INITRD
+
 /* ST M25P40 */
-#undef CONFIG_SPI_FLASH_MACRONIX
-#define CONFIG_SPI_FLASH_STMICRO
 #undef CONFIG_ENV_SPI_MAX_HZ
 #define CONFIG_ENV_SPI_MAX_HZ		25000000
 #undef CONFIG_SF_DEFAULT_SPEED
 #define CONFIG_SF_DEFAULT_SPEED		25000000
 
-
-#undef CONFIG_SYS_PROMPT
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-
 /*
  *  Environment variables configurations
  */
@@ -123,27 +98,31 @@
 	"hdpart=0:1\0"							\
 	"kernel_addr=0x00800000\0"					\
 	"ramdisk_addr=0x01000000\0"					\
-	"fdt_addr=0x01ff0000\0"						\
+	"fdt_addr=0x00ff0000\0"						\
 	"bootcmd_legacy=ide reset "					\
-		"&& load ide ${hdpart} 0x00100000 /uImage.buffalo "	\
-		"&& load ide ${hdpart} 0x00800000 /initrd.buffalo "	\
-		"&& bootm 0x00100000 0x00800000\0"			\
-	"bootcmd_net=bootp ${kernel_addr} uImage "			\
-		"&& tftpboot ${ramdisk_addr} uInitrd "			\
+		"&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo "	\
+		"&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
+		"&& bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"bootcmd_net=bootp ${kernel_addr} vmlinuz "			\
+		"&& tftpboot ${ramdisk_addr} initrd.img "		\
+		"&& setenv ramdisk_len ${filesize} "			\
 		"&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " "		\
-		"&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
+		"&& bootz ${kernel_addr} "				\
+			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
 	"bootcmd_hdd=ide reset "					\
-		"&& load ide ${hdpart} ${kernel_addr} /uImage "		\
-		"&& load ide ${hdpart} ${ramdisk_addr} /uInitrd "	\
-		"&& load ide ${hdpart} ${fdt_addr} "			\
-			"/" CONFIG_FDTFILE " "				\
-		"&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
+		"&& load ide ${hdpart} ${kernel_addr} /vmlinuz "	\
+		"&& load ide ${hdpart} ${ramdisk_addr} /initrd.img "	\
+		"&& setenv ramdisk_len ${filesize} "			\
+		"&& load ide ${hdpart} ${fdt_addr} /dtb "		\
+		"&& bootz ${kernel_addr} "				\
+			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
 	"bootcmd_usb=usb start "					\
-		"&& load usb 0:1 ${kernel_addr} /uImage "		\
-		"&& load usb 0:1 ${ramdisk_addr} /uInitrd "		\
-		"&& load usb 0:1 ${fdt_addr} "				\
-			"/" CONFIG_FDTFILE " "				\
-		"&& bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
+		"&& load usb 0:1 ${kernel_addr} /vmlinuz "		\
+		"&& load usb 0:1 ${ramdisk_addr} /initrd.img "		\
+		"&& setenv ramdisk_len ${filesize} "			\
+		"&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " "	\
+		"&& bootz ${kernel_addr} "				\
+			"${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0"	\
 	"bootcmd_rescue=run config_nc_dhcp; run nc\0"			\
 	"eraseenv=sf probe 0 "						\
 		"&& sf erase " __stringify(CONFIG_ENV_OFFSET)		\
@@ -157,7 +136,7 @@
 	"standard_env=setenv ipaddr; setenv netmask; setenv serverip; "	\
 		"setenv ncip; setenv gatewayip; setenv ethact; "	\
 		"setenv bootfile; setenv dnsip; "			\
-		"setenv bootsource hdd; run ser\0"			\
+		"setenv bootsource legacy; run ser\0"			\
 	"restore_env=run standard_env; saveenv; reset\0"		\
 	"ser=setenv stdin serial; setenv stdout serial; "		\
 		"setenv stderr serial\0"				\