X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls2080ardb.h;h=2dab065be1acb1f64c4f00cdd7b8a2eb8c4a5058;hb=380e86f361e4e2aef83295972863654fde157560;hp=2e0d95efd744bf841bf8eb10d95500dfebf4c1be;hpb=8dc1b17f14c9201c7d0da0f33e404a7e051b2ec6;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 2e0d95e..2dab065 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -1,4 +1,5 @@
 /*
+ * Copyright 2017 NXP
  * Copyright 2015 Freescale Semiconductor
  *
  * SPDX-License-Identifier:	GPL-2.0+
@@ -12,6 +13,14 @@
 #undef CONFIG_CONS_INDEX
 #define CONFIG_CONS_INDEX       2
 
+#ifdef CONFIG_FSL_QSPI
+#ifdef CONFIG_TARGET_LS2081ARDB
+#define CONFIG_QIXIS_I2C_ACCESS
+#endif
+#define CONFIG_SYS_I2C_EARLY_INIT
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+#endif
+
 #define I2C_MUX_CH_VOL_MONITOR		0xa
 #define I2C_VOL_MONITOR_ADDR		0x38
 #define CONFIG_VOL_MONITOR_IR36021_READ
@@ -69,6 +78,7 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 						CONFIG_SYS_SCSI_MAX_LUN)
 
+#ifndef CONFIG_FSL_QSPI
 /* undefined CONFIG_FSL_DDR_SYNC_REFRESH for simulator */
 
 #define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
@@ -157,7 +167,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(512 * 1024)
-
 #define CONFIG_FSL_QIXIS	/* use common QIXIS code */
 #define QIXIS_LBMAP_SWITCH		0x06
 #define QIXIS_LBMAP_MASK		0x0f
@@ -242,7 +251,7 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
 
 #define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x200000)
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x300000)
 #define CONFIG_ENV_SECT_SIZE		0x20000
 #define CONFIG_ENV_SIZE			0x2000
 #endif
@@ -250,12 +259,31 @@ unsigned long get_board_sys_clk(void);
 /* Debug Server firmware */
 #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
 #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR	0x580D00000ULL
-
+#endif
 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 
+#ifdef CONFIG_TARGET_LS2081ARDB
+#define CONFIG_FSL_QIXIS	/* use common QIXIS code */
+#define QIXIS_QMAP_MASK			0x07
+#define QIXIS_QMAP_SHIFT		5
+#define QIXIS_LBMAP_DFLTBANK		0x00
+#define QIXIS_LBMAP_QSPI		0x00
+#define QIXIS_RCW_SRC_QSPI		0x62
+#define QIXIS_LBMAP_ALTBANK		0x20
+#define QIXIS_RST_CTL_RESET		0x31
+#define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
+#define QIXIS_RCFG_CTL_RECONFIG_START	0x21
+#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
+#define QIXIS_LBMAP_MASK		0x0f
+#define QIXIS_RST_CTL_RESET_EN		0x30
+#endif
+
 /*
  * I2C
  */
+#ifdef CONFIG_TARGET_LS2081ARDB
+#define CONFIG_SYS_I2C_FPGA_ADDR	0x66
+#endif
 #define I2C_MUX_PCA_ADDR		0x75
 #define I2C_MUX_PCA_ADDR_PRI		0x75 /* Primary Mux*/
 
@@ -263,18 +291,33 @@ unsigned long get_board_sys_clk(void);
 #define I2C_MUX_CH_DEFAULT      0x8
 
 /* SPI */
-#ifdef CONFIG_FSL_DSPI
+#if defined(CONFIG_FSL_QSPI) || defined(CONFIG_FSL_DSPI)
 #define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_BAR
+#ifdef CONFIG_FSL_QSPI
 #define CONFIG_SPI_FLASH_STMICRO
 #endif
+#ifdef CONFIG_FSL_QSPI
+#ifdef CONFIG_TARGET_LS2081ARDB
+#define CONFIG_SPI_FLASH_STMICRO
+#else
+#define CONFIG_SPI_FLASH_SPANSION
+#endif
+#define FSL_QSPI_FLASH_SIZE		SZ_64M	/* 64MB */
+#define FSL_QSPI_FLASH_NUM		2
+#endif
+#endif
 
 /*
  * RTC configuration
  */
 #define RTC
+#ifdef CONFIG_TARGET_LS2081ARDB
+#define CONFIG_RTC_PCF8563		1
+#define CONFIG_SYS_I2C_RTC_ADDR         0x51
+#else
 #define CONFIG_RTC_DS3231               1
 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
+#endif
 
 /* EEPROM */
 #define CONFIG_ID_EEPROM
@@ -334,15 +377,34 @@ unsigned long get_board_sys_clk(void);
 	"ramdisk_size=0x2000000\0"		\
 	"fdt_high=0xa0000000\0"			\
 	"initrd_high=0xffffffffffffffff\0"	\
-	"kernel_start=0x581100000\0"		\
+	"kernel_start=0x581000000\0"		\
 	"kernel_load=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
 	"mcmemsize=0x40000000\0"		\
 	"fdtfile=fsl-ls2080a-rdb.dtb\0"		\
-	"mcinitcmd=esbc_validate 0x580c80000;"  \
-	"esbc_validate 0x580cc0000;"            \
-	"fsl_mc start mc 0x580300000"           \
-	" 0x580800000 \0"                       \
+	"mcinitcmd=esbc_validate 0x580700000;"  \
+	"esbc_validate 0x580740000;"            \
+	"fsl_mc start mc 0x580a00000"           \
+	" 0x580e00000 \0"                       \
+	BOOTENV
+#else
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
+	"scriptaddr=0x80800000\0"		\
+	"kernel_addr_r=0x81000000\0"		\
+	"pxefile_addr_r=0x81000000\0"		\
+	"fdt_addr_r=0x88000000\0"		\
+	"ramdisk_addr_r=0x89000000\0"		\
+	"loadaddr=0x80100000\0"			\
+	"kernel_addr=0x100000\0"		\
+	"ramdisk_size=0x2000000\0"		\
+	"fdt_high=0xa0000000\0"			\
+	"initrd_high=0xffffffffffffffff\0"	\
+	"kernel_start=0x21000000\0"		\
+	"mcmemsize=0x40000000\0"		\
+	"mcinitcmd=fsl_mc start mc 0x20a00000" \
+	" 0x20e00000 \0"                       \
 	BOOTENV
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS		\
@@ -358,15 +420,16 @@ unsigned long get_board_sys_clk(void);
 	"ramdisk_size=0x2000000\0"		\
 	"fdt_high=0xa0000000\0"			\
 	"initrd_high=0xffffffffffffffff\0"	\
-	"kernel_start=0x581100000\0"		\
+	"kernel_start=0x581000000\0"		\
 	"kernel_load=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
 	"mcmemsize=0x40000000\0"		\
 	"fdtfile=fsl-ls2080a-rdb.dtb\0"		\
-	"mcinitcmd=fsl_mc start mc 0x580300000" \
-	" 0x580800000 \0"                       \
+	"mcinitcmd=fsl_mc start mc 0x580a00000" \
+	" 0x580e00000 \0"                       \
 	BOOTENV
 #endif
+#endif
 
 
 #undef CONFIG_BOOTARGS
@@ -376,11 +439,18 @@ unsigned long get_board_sys_clk(void);
 				" hugepagesz=2m hugepages=256"
 
 #undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_QSPI_BOOT
+/* Try to boot an on-QSPI kernel first, then do normal distro boot */
+#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x20d00000" \
+			   " && bootm $kernel_start" \
+			   " || run distro_bootcmd"
+#else
 /* Try to boot an on-NOR kernel first, then do normal distro boot */
-#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580700000" \
+#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580d00000" \
 			   " && cp.b $kernel_start $kernel_load $kernel_size" \
 			   " && bootm $kernel_load" \
 			   " || run distro_bootcmd"
+#endif
 
 /* MAC/PHY configuration */
 #ifdef CONFIG_FSL_MC_ENET
@@ -389,7 +459,11 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_PHY_CORTINA
 #define CONFIG_PHYLIB
 #define	CONFIG_SYS_CORTINA_FW_IN_NOR
-#define CONFIG_CORTINA_FW_ADDR		0x581000000
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_CORTINA_FW_ADDR		0x20980000
+#else
+#define CONFIG_CORTINA_FW_ADDR		0x580980000
+#endif
 #define CONFIG_CORTINA_FW_LENGTH	0x40000
 
 #define CORTINA_PHY_ADDR1	0x10