X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls2080ardb.h;h=012c24f88eaf4b585b01ef06d528516606ff8495;hb=07dea2e737f78ee70e81c27d976811f0e9fdbad8;hp=de67e1d16e853595f1530605ba891a25edb55092;hpb=f0ca30fa19ee57e2f8452a1d0b8a30eb923d7e22;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index de67e1d..012c24f 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -10,15 +10,11 @@
 
 #include "ls2080a_common.h"
 
-#undef CONFIG_CONS_INDEX
-#define CONFIG_CONS_INDEX       2
-
 #ifdef CONFIG_FSL_QSPI
 #ifdef CONFIG_TARGET_LS2081ARDB
 #define CONFIG_QIXIS_I2C_ACCESS
 #endif
 #define CONFIG_SYS_I2C_EARLY_INIT
-#define CONFIG_DISPLAY_BOARDINFO_LATE
 #endif
 
 #define I2C_MUX_CH_VOL_MONITOR		0xa
@@ -65,8 +61,6 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_FSL_DDR_BIST	/* enable built-in memory test */
 
 /* SATA */
-#define CONFIG_LIBATA
-#define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
 
 #define CONFIG_SYS_SATA1			AHCI_BASE_ADDR1
@@ -289,19 +283,15 @@ unsigned long get_board_sys_clk(void);
 /* SPI */
 #if defined(CONFIG_FSL_QSPI) || defined(CONFIG_FSL_DSPI)
 #define CONFIG_SPI_FLASH
-#ifdef CONFIG_FSL_QSPI
+#ifdef CONFIG_FSL_DSPI
 #define CONFIG_SPI_FLASH_STMICRO
 #endif
 #ifdef CONFIG_FSL_QSPI
-#ifdef CONFIG_TARGET_LS2081ARDB
-#define CONFIG_SPI_FLASH_STMICRO
-#else
 #define CONFIG_SPI_FLASH_SPANSION
 #endif
 #define FSL_QSPI_FLASH_SIZE		SZ_64M	/* 64MB */
 #define FSL_QSPI_FLASH_NUM		2
 #endif
-#endif
 
 /*
  * RTC configuration
@@ -328,27 +318,15 @@ unsigned long get_board_sys_clk(void);
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_CMD_PCI
 #endif
 
 /*  MMC  */
 #ifdef CONFIG_MMC
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #endif
 
 #define CONFIG_MISC_INIT_R
 
-/*
- * USB
- */
-#define CONFIG_HAS_FSL_XHCI_USB
-#define CONFIG_USB_XHCI_FSL
-#define CONFIG_USB_MAX_CONTROLLER_COUNT         2
-
-#undef CONFIG_CMDLINE_EDITING
-#include <config_distro_defaults.h>
-
 #define BOOT_TARGET_DEVICES(func) \
 	func(USB, usb, 0) \
 	func(MMC, mmc, 0) \
@@ -362,6 +340,17 @@ unsigned long get_board_sys_clk(void);
 	"esbc_validate 0x20700000 && "		\
 	"esbc_validate 0x20740000;"		\
 	"fsl_mc start mc 0x20a00000 0x20e00000 \0"
+#elif defined(CONFIG_SD_BOOT)
+#define MC_INIT_CMD                             \
+	"mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \
+	"mmc read 0x80100000 0x7000 0x800;"	\
+	"env exists secureboot && "		\
+	"mmc read 0x80700000 0x3800 0x10 && "	\
+	"mmc read 0x80740000 0x3A00 0x10 && "	\
+	"esbc_validate 0x80700000 && "		\
+	"esbc_validate 0x80740000 ;"		\
+	"fsl_mc start mc 0x80000000 0x80100000\0" \
+	"mcmemsize=0x70000000\0"
 #else
 #define MC_INIT_CMD				\
 	"mcinitcmd=env exists secureboot && "	\
@@ -379,7 +368,7 @@ unsigned long get_board_sys_clk(void);
 	"fdt_high=0xa0000000\0"			\
 	"initrd_high=0xffffffffffffffff\0"	\
 	"fdt_addr=0x64f00000\0"			\
-	"kernel_addr=0x65000000\0"		\
+	"kernel_addr=0x581000000\0"		\
 	"kernel_start=0x1000000\0"		\
 	"kernelheader_start=0x800000\0"		\
 	"scriptaddr=0x80000000\0"		\
@@ -392,7 +381,14 @@ unsigned long get_board_sys_clk(void);
 	"fdt_addr_r=0x90000000\0"		\
 	"load_addr=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
+	"kernel_addr_sd=0x8000\0"		\
+	"kernel_size_sd=0x14000\0"              \
 	"console=ttyAMA0,38400n8\0"		\
+	"mcmemsize=0x70000000\0"		\
+	"sd_bootcmd=echo Trying load from SD ..;" \
+	"mmcinfo; mmc read $load_addr "		\
+	"$kernel_addr_sd $kernel_size_sd && "	\
+	"bootm $load_addr#$board\0"             \
 	MC_INIT_CMD				\
 	BOOTENV					\
 	"boot_scripts=ls2088ardb_boot.scr\0"	\
@@ -421,9 +417,6 @@ unsigned long get_board_sys_clk(void);
 			"${scripthdraddr} ${prefix}${boot_script_hdr} "	\
 			"&& esbc_validate ${scripthdraddr};"	\
 		"source ${scriptaddr}\0"			\
-	"installer=load mmc 0:2 $load_addr "			\
-		"/flex_installer_arm64.itb; "			\
-		"bootm $load_addr#ls2088ardb\0"			\
 	"qspi_bootcmd=echo Trying load from qspi..;"		\
 		"sf probe && sf read $load_addr "		\
 		"$kernel_start $kernel_size ; env exists secureboot &&"	\
@@ -446,7 +439,18 @@ unsigned long get_board_sys_clk(void);
 			"env exists mcinitcmd && "			\
 			"fsl_mc lazyapply dpl 0x20d00000; "		\
 			"run distro_bootcmd;run qspi_bootcmd; "		\
-			"env exists secureboot && esbc_halt; "
+			"env exists secureboot && esbc_halt;"
+#elif defined(CONFIG_SD_BOOT)
+/* Try to boot an on-SD kernel first, then do normal distro boot */
+#define CONFIG_BOOTCOMMAND						\
+			"env exists mcinitcmd && env exists secureboot "\
+			"&& mmcinfo && mmc read $load_addr 0x3c00 0x800 " \
+			"&& esbc_validate $load_addr; "			\
+			"env exists mcinitcmd && run mcinitcmd "	\
+			"&& mmc read 0x88000000 0x6800 0x800 "		\
+			"&& fsl_mc lazyapply dpl 0x88000000; "		\
+			"run distro_bootcmd;run sd_bootcmd; "		\
+			"env exists secureboot && esbc_halt;"
 #else
 /* Try to boot an on-NOR kernel first, then do normal distro boot */
 #define CONFIG_BOOTCOMMAND						\
@@ -454,15 +458,9 @@ unsigned long get_board_sys_clk(void);
 			"&& esbc_validate 0x580780000; env exists mcinitcmd "\
 			"&& fsl_mc lazyapply dpl 0x580d00000;"		\
 			"run distro_bootcmd;run nor_bootcmd; "		\
-			"env exists secureboot && esbc_halt; "
+			"env exists secureboot && esbc_halt;"
 #endif
 
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTARGS		"console=ttyS1,115200 root=/dev/ram0 " \
-				"earlycon=uart8250,mmio,0x21c0600 " \
-				"ramdisk_size=0x2000000 default_hugepagesz=2m" \
-				" hugepagesz=2m hugepages=256"
-
 /* MAC/PHY configuration */
 #ifdef CONFIG_FSL_MC_ENET
 #define CONFIG_PHYLIB_10G