X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls2080aqds.h;h=d02d7fc58867facb0ce9cbfe1325b1c10482639d;hb=c56289ddafce3d1ec442fb18064f136c2c47d0bb;hp=21ca4afa51ce516a4cbd89bf933611a30faf442b;hpb=910feb50d40acdd38b3709050fbe6b650e8c4b9d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 21ca4af..d02d7fc 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -24,10 +24,6 @@
 #define SPD_EEPROM_ADDRESS5	0x55
 #define SPD_EEPROM_ADDRESS6	0x56	/* dummy address */
 #define SPD_EEPROM_ADDRESS	SPD_EEPROM_ADDRESS1
-#define CONFIG_SYS_SPD_BUS_NUM	0	/* SPD on I2C bus 0 */
-#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
-#define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR	1
-#endif
 
 #define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
 #define CONFIG_SYS_NOR_AMASK		IFC_AMASK(128*1024*1024)
@@ -68,14 +64,8 @@
 #define CONFIG_SYS_IFC_CCR	0x01000000
 
 #ifdef CONFIG_MTD_NOR_FLASH
-#define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */
 
-#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE,\
 					 CONFIG_SYS_FLASH_BASE + 0x40000000}
 #endif
@@ -218,10 +208,6 @@
 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
 #endif
 
-/* Debug Server firmware */
-#define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
-#define CONFIG_SYS_DEBUG_SERVER_FW_ADDR	0x580D00000ULL
-
 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 
 /*
@@ -243,30 +229,12 @@
 #define FSL_QIXIS_BRDCFG9_QSPI		0x1
 
 /*
- * MMC
- */
-#ifdef CONFIG_MMC
-#define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
-	QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
-#endif
-
-/*
  * RTC configuration
  */
 #define RTC
 #define CONFIG_RTC_DS3231               1
 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 
-/* EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_NXID
-#define CONFIG_SYS_EEPROM_BUS_NUM	0
-
-#define CONFIG_FSL_MEMAC
-
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
 /* Initial environment variables */
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #ifdef CONFIG_NXP_ESBC
@@ -411,7 +379,6 @@
 #endif
 
 #if defined(CONFIG_FSL_MC_ENET)
-#define CONFIG_FSL_MEMAC
 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 #define SGMII_CARD_PORT2_PHY_ADDR 0x1d
 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E