X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fls2080aqds.h;h=8ab892b5c3fa7094748b9695739c778ad64384b1;hb=04da42770b0cc3bea8841972bfc9568299ece826;hp=08696fa9a3af7e6004b0fcd191e3268cb6c9774e;hpb=0b73ef0c02313e651af4b0a8e206c7c4a198e7f8;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 08696fa..8ab892b 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2017, 2019 NXP
+ * Copyright 2017, 2019-2020 NXP
  * Copyright 2015 Freescale Semiconductor
  */
 
@@ -58,11 +58,6 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_TFABOOT
 #define CONFIG_SYS_MMC_ENV_DEV		0
-#define CONFIG_ENV_SIZE			0x20000
-#define CONFIG_ENV_OFFSET		0x500000
-#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + \
-					 CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SECT_SIZE		0x20000
 #endif
 
 #define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
@@ -229,16 +224,11 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
 
-#define CONFIG_ENV_OFFSET		(896 * 1024)
-#define CONFIG_ENV_SECT_SIZE		0x20000
-#define CONFIG_ENV_SIZE			0x2000
 #define CONFIG_SPL_PAD_TO		0x20000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	(256 * 1024)
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(640 * 1024)
 #elif defined(CONFIG_SD_BOOT)
-#define CONFIG_ENV_OFFSET		0x300000
 #define CONFIG_SYS_MMC_ENV_DEV		0
-#define CONFIG_ENV_SIZE			0x20000
 #endif
 #else
 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
@@ -268,12 +258,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NAND_FTIM1
 #define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NAND_FTIM2
 #define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
-
-#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_TFABOOT)
-#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x300000)
-#define CONFIG_ENV_SECT_SIZE		0x20000
-#define CONFIG_ENV_SIZE			0x2000
-#endif
 #endif
 
 /* Debug Server firmware */
@@ -365,8 +349,8 @@ unsigned long get_board_ddr_clk(void);
 	"kernel_load=0xa0000000\0"		\
 	"kernel_size=0x2800000\0"		\
 	"mcmemsize=0x40000000\0"		\
-	"mcinitcmd=esbc_validate 0x580700000;"  \
-	"esbc_validate 0x580740000;"            \
+	"mcinitcmd=esbc_validate 0x580640000;"  \
+	"esbc_validate 0x580680000;"            \
 	"fsl_mc start mc 0x580a00000"           \
 	" 0x580e00000 \0"
 #else
@@ -394,12 +378,35 @@ unsigned long get_board_ddr_clk(void);
 	"kernel_size=0x2800000\0"               \
 	"kernel_size_sd=0x14000\0"               \
 	"load_addr=0xa0000000\0"		            \
-	"kernelheader_addr=0x580800000\0"	\
+	"kernelheader_addr=0x580600000\0"	\
 	"kernelheader_addr_r=0x80200000\0"	\
 	"kernelheader_size=0x40000\0"		\
 	"BOARD=ls2088aqds\0" \
 	"mcmemsize=0x70000000 \0" \
+	"scriptaddr=0x80000000\0"		\
+	"scripthdraddr=0x80080000\0"		\
 	IFC_MC_INIT_CMD				\
+	BOOTENV					\
+	"boot_scripts=ls2088aqds_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls2088aqds_bs.out\0"	\
+	"scan_dev_for_boot_part="		\
+		"part list ${devtype} ${devnum} devplist; "	\
+		"env exists devplist || setenv devplist 1; "	\
+		"for distro_bootpart in ${devplist}; do "	\
+			"if fstype ${devtype} "			\
+				"${devnum}:${distro_bootpart} "	\
+				"bootfstype; then "		\
+				"run scan_dev_for_boot; "	\
+			"fi; "					\
+		"done\0"					\
+	"boot_a_script="					\
+		"load ${devtype} ${devnum}:${distro_bootpart} "	\
+			"${scriptaddr} ${prefix}${script}; "	\
+		"env exists secureboot && load ${devtype} "	\
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr} "	\
+			"&& esbc_validate ${scripthdraddr};"	\
+		"source ${scriptaddr}\0"			\
 	"nor_bootcmd=echo Trying load from nor..;"		\
 		"cp.b $kernel_addr $load_addr "			\
 		"$kernel_size ; env exists secureboot && "	\
@@ -445,30 +452,33 @@ unsigned long get_board_ddr_clk(void);
 #endif /* CONFIG_NXP_ESBC */
 
 #ifdef CONFIG_TFABOOT
+#define BOOT_TARGET_DEVICES(func) \
+	func(USB, usb, 0) \
+	func(MMC, mmc, 0) \
+	func(SCSI, scsi, 0) \
+	func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+
 #define SD_BOOTCOMMAND						\
 			"env exists mcinitcmd && env exists secureboot "\
-			"&& mmcinfo && mmc read $load_addr 0x3c00 0x800 " \
+			"&& mmcinfo && mmc read $load_addr 0x3600 0x800 " \
 			"&& esbc_validate $load_addr; "			\
 			"env exists mcinitcmd && run mcinitcmd "	\
 			"&& mmc read 0x80d00000 0x6800 0x800 "		\
 			"&& fsl_mc lazyapply dpl 0x80d00000; "		\
-			"run sd_bootcmd; "		\
+			"run distro_bootcmd;run sd_bootcmd; "		\
 			"env exists secureboot && esbc_halt;"
 
 #define IFC_NOR_BOOTCOMMAND						\
 			"env exists mcinitcmd && env exists secureboot "\
-			"&& esbc_validate 0x580780000; env exists mcinitcmd "\
+			"&& esbc_validate 0x5806C0000; env exists mcinitcmd "\
 			"&& fsl_mc lazyapply dpl 0x580d00000;"		\
-			"run nor_bootcmd; "		\
+			"run distro_bootcmd;run nor_bootcmd; "		\
 			"env exists secureboot && esbc_halt;"
 #endif
 
 #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
 #define CONFIG_FSL_MEMAC
-#define CONFIG_PHYLIB_10G
-#define CONFIG_PHY_VITESSE
-#define CONFIG_PHY_REALTEK
-#define CONFIG_PHY_TERANETICS
 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 #define SGMII_CARD_PORT2_PHY_ADDR 0x1d
 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E